Sort By
Per Page
View
Grid
List
New Veritas Micro-Adjust Wheel Marking Gauge
Veritas have refined and redesigned their ever popular wheel marking gauges. This new micro-adjust wheel marking gauge draws on two decades of manufacturing experience, with subtle improvements across the board.
The adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of...
Veritas Dual Marking Gauge
The Veritas Dual Marking Gauge has two independently adjustable rods, which will allow you to set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions. Projection up to 5-3/4" is easy to set, since an internal O-ring keeps light but constant friction on each rod; a thumbscrew firmly locks rods in place.
Like other Veritas marking...
Veritas Mk.II Honing Guide
The key to consistent and fast honing is repeatability - and this guide delivers it in spades. Whether you're a sharpening veteran or just starting out, this versatile guide lets you concentrate on sharpening without worrying about controlling blade angle at the same time. This makes your honing reliable, accurate and consistent. Three options let you choose the honing guide that best suits your...
Veritas Large Tapered Reamer
The Veritas large tapered reamer 5mm to 30mm (3/16" to 1-3/16") is useful to rustic furniture makers for back-tapering holes for through-tenon wedging.
The bit is 140mm overall length with an 8mm hex shank.
Designed for use in an electric drill, this tool may also be used in a traditional brace.
The Veritas small tapered reamer 5mm to 19mm (3/16" to 3/4") is useful to rustic furniture makers for...
Veritas Side-Clamping Honing Guide
The tried-and-true design of a side-clamping guide is familiar to most woodworkers. This side-clamping honing guide is a piece of modern-day engineering that improves on this established design while maintaining the flexibility of this type of guide. Chisels and plane blades ranging from 1/8" (3mm) to 2½" (63mm) fit securely for accurate honing. The unique three-point holding position...
Set of 4 Veritas Super Hard Scrapers
Most cabinet scrapers are sheared from spring steel, hardened to Rc38-42. These scrapers are harder (Rc48-52) and hold an edge longer. The edges are carefully milled to a square, sharp 90° ready for immediate use on fine work. For heavy-duty use, a hook must be burnished onto them. The prepared edges not only save you the initial effort of filing and stoning, but indicate the condition they should...
Veritas Router Plane
Veritas Router Plane
Veritas Tapered Tenon Cutters
Veritas tapered tenon cutters will put tapered tenons on the tips of turnings, dowels or rustic furniture components to fit into tapered holes; for example, legs and spindles on a Windsor chair. Use the cutter like a hand-held pencil sharpener; you either rotate the workpiece while pressing it into the cutter body or you can rotate the tool on the workpiece. Works equally well in soft, green or hard...
Veritas Micro Adjust Marking Gauge
The Veritas wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminium body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly...
Veritas Low-Angle Block Plane + PM-V11 Blade
Veritas have made a block plane that uses a ''Norris'' style combined sideways (lateral) and up and down adjustment which gives you greater control when adjusting its impressive 1/8'' thick by 1 5/8'' wide PM-V11.
This plane also overcomes one of the drawbacks of other block planes in having higher side wings (ideal for shooting) with finger grips in each side. The...
Veritas Flat Spokeshave PM-V11
The Veritas flat spokeshave has a 1/8" (0.125") thick PM-V11 tool steel blade, seated at 45° to the sole.
The thick blade, carefully machined lever cap and blade bed all combine to produce chatterfree cutting in most situations.
The ductile cast iron body is fitted with African rosewood handles that are shaped for comfort and control, offering several ways to grip the tool comfortably...
Veritas Dovetail Saw
When we first saw this saw (!) we were a bit dubious but it has quickly grown on us. It is very comfortable. it is very affordable, it cuts well and can be re-sharpened. Not for the purists maybe but beauty is in the eye of the beholder. This is what those clever chaps from Veritas say about this saw....
The Veritas dovetail saw is an innovative blend of tradition and technology. It incorporates...
Veritas Plane Screwdriver
A regular screwdriver just doesn't work well on cap iron screws. A narrow blade can mar the cap-screw slot, and there's always the risk that the screwdriver tip will slip out of the slot altogether. Veritas have designed this screwdriver to make it both safe and easy to remove, replace or adjust cap irons.
It has a turned brass collar surrounding the tip to capture the head of a cap iron screw...
Veritas Planing Stop
These low-profile work stops present a broad bearing surface. Particularly useful with thin or narrow workpieces, each 1 1/4" wide anodized aluminum rail projects just 0.22" above the bench top, allowing materials as thin as 1/4" to be worked or planed without obstruction. It also provides a reliable registration surface for materials too narrow to span two adjacent bench dogs.
The...
Veritas Apron Plane + PM-V11 Blade
This small, low-angle block plane from Veritas is the answer to a trim carpenter's prayers. At only 14oz it is half the weight of a standard block plane, a significant factor if you want to carry it with you all day.
The 5½" long, tough ductile cast iron body will take job-site accidents in stride. This is not a plane body that will break when dropped. It has good hand feel; the unique side...
Veritas Crosscut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed crosscut at 14tpi. The teeth have a rake angle of 15°, an included angle of 60° with alternate 15° bevels to efficienlty sever wood fibres rather than tear. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid...
Veritas Low-Angle Jack Plane + PM-V11 Blade
The Veritas® low-angle jack plane is an exceptionally versatile plane. It excels at end grain work, is great for shooting, and also works well for smoothing. With the optional high-angle blade, it is also the answer for working difficult grain, making it a well-rounded workhorse.
Veritas have designated it as a 62½ because of its generous size, heavier weight, low center of gravity...
Veritas Card Scraper Burnisher
A new take on typical single-handled burnishers, this latest tool from Veritas is an innovative design permitting a two handed grip, improving control so you can roll precisely the sort of hook you want on your scraper. As comfortable to grip as a spokeshave, it is held between the thumbs and forefingers, keeping your fingertips close to the carbide rod. This gives you much better tactile feedback,...
Veritas Fine Cut Dovetail Saw (20tpi)
The Veritas Fine Cut Dovetail Saw (20tpi) is best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury.
The Veritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art...
Veritas Shooting Plane + PM-V11 Blade
The mass of this Veritas Shooting Plane, its long base and low centre of gravity make it both stable and effective. Tipping the scales at just over 3.5kg and just under 400mm long, it is a substantial plane; you will appreciate the authority it provides when shooting.
The body is fully stress-relieved, ductile cast iron, with a sole and running surface machined flat and square to one another;...
Veritas Jointer/Edger
This jointer/edger can be used on cabinet scrapers, scraper plane blades, handsaws and ski edges.
It has a 45° jointing capability as well as the standard 90°. The handle has a comfortable, ergonomic shape and the screws are designed so they can be tightened with a small coin (to accommodate skiers).
In the shop, it is invaluable for jointing scrapers and handsaws; the fence is relieved next...
Veritas Dovetail Saddle Markers
These Veritas dovetail saddle markers are precision machined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The long legs ensure accurate registration.
Also, much like the Veritas® Saddle Square™ they are based on, they allow a continuous line to be transferred around the corner, so the straight and angled lines can be scribed at the same...
Veritas Bevel-Up Jointer Plane + PM-V11 Blade
The Veritas low-angle jointer is the largest member of the Veritas bevel-up bench plane family. At 22" x 2.7/8" and weighing 7½lb, it is the answer for jointing edges and flattening large panels.
The bevel-up blade configuration results in a plane that is versatile and straightforward to use. The 12° bed angle, coupled with the 25° blade bevel, creates an effective cutting angle of 37°. Simply...
Veritas Standard Marking Gauge
Standard Gauge - pretty much the same construction as the micro adjust but these are slighly shorter at 6" and do not have the micro adjust feature.
Veritas Medium Shoulder Plane + PM-V11 Blade
The shoulder plane (a specialized rebate plane) is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for trimming the shoulder of a tenon to perfection or for rebating work.
The Veritas® medium shoulder plane is proportioned for versatility; it measures 7" long by 0.700" wide and weighs 2 lb. The ductile cast iron body is accurately machined and ground so that...
Veritas Rip Cut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm.
The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece...
Both Veritas Dovetail Saw and Magnetic Guide
Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
The Veritas Magnetic Dovetail 1:8 Guide, clamps in position and holds the saw...
Veritas Miniature Wonder Dog
This 1:3 scale version of the Veritas Wonder Dog is especially useful for securing small work horizontally. Sized to fit in a 17/64'' dog hole, it has a 1 1/2'' long stainless-steel post with an O-ring for slightly elevated clamping.
At 3/4'' wide and 1/4'' high, the brass head will not mark tools or workpieces. The clamping screw provides approximately 1 1/4''...
Veritas Set of Miniature Surface Dogs
Just like its full-size version, this functional 1:3 scale surface dog has a flat face for work registration and a rim that supports and stabilizes it on a miniature workbench. The post fits in a 17/64'' diameter dog hole, resisting movement from horizontal forces. The face is 11/32'' × 3/16'' tall. Solid brass, the surface dog is non-corroding and kind to your tools.
To...
Veritas Bench Dogs & Pups
These are made from solid brass rod. Sold in pairs.
The crosshatching and 2° slope on the face help to hold wood securely, pulling it down onto the bench's surface. A side spring slides cleanly and holds it in position.
The dogs are 110mm (4.3/8") long, the pups 60mm (2.3/8").
Both work well in combination with Veritas Wonder Dog and Wonder Pup Clamps. For 19mm (3/4")...
Veritas Curved Scraper Sets
These sets of three curved scrapers will handle a wide range of scraping jobs.
The rectangular model with convex/concave ends is excellent for bowl work or for scraping spindles.
The shmoo shape (easily recognizable to long-time readers of Li'l Abner) is equally useful for a wide range of concave surfaces as well as large moldings and small spindles.
The third style has two different gentle...
Veritas Flush Cutting Saw
Traditionally used for the rapid trimming of plugs and dowels flush with a surface, the Veritas flush cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only
The 22 tpi Japanese tooth-pattern blade cuts aggressively (on the pull stroke), but does not mark the surface that it is...
Veritas Miniature Cabinetmaker's Trimming Plane
This fully functional 1:3-scale version of the Veritas cabinetmaker's trimming plane is a useful tool for reaching places a regular-size plane or chisel just won’t fit. Only 2 3/16'' (55mm) long, 5/8'' (16mm) wide and less than 1'' (25mm) in height, it excels at making precise paring cuts in tight spots, such as a box interior.
The 25° bevel blade and 15°...
Veritas Round Spokeshave PM-V11
The Veritas Round Spokeshave has a 3.2mm thick PM-V11 steel blade, which fits perfectly onto the machined blade.
The ductile cast iron body is fitted with hardwood handles, shaped for comfort and control. The toe serves as a thumb rest allowing the user to choke up on the body to attain exceptional control. Twin adjustment wheels quickly and accurately control cut depth and skew and shims let...
Veritas Skew Rabbet + PM-V11 Blade
Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts are clean and accurate.
Adjustable in two axes (vertical and horizontal) for depth and projection, the scoring spur sits...
Veritas Transfer Log Scribe
Can be used with 2 pencils for double scribing and the hardened steel pin can be used on one leg for smooth scribing.
Fully adjustable from 0-300mm. Calibrated so that any opening can be used once the double bubbles are set for a given pencil & pin projection.
Curved pin tip has rounded end for smooth scribing and straight tip is sharp pointed for compass work.
Includes indelible pencil...
Lee Valley Cast Scratch Stock
Founded in 1825, Edward Preston & Sons, Ltd. produced some of the finest tools of the Victorian age.
This elegant hand reeder and beading tool can be used to cut decorative profiles into furniture (such as beading on small table or cabinet edges or reeding on chair and table legs). It can also be used with a straight cutter for shallow rabbeting work, such as on mirror and picture frames.
The...
Veritas DX60 Block Plane + PM-V11 Blade
This Veritas DX60 block plane is one of the finest planes that Veritas have ever made. 4 years of design work culminates in a superb plane made to exacting standards and featuring newly refined stainless-steel hardware.
The knob and wheel have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an...
Veritas Japanese Style Awl
These Veritas Japanese style awls have accurately turned conical tips, strong bolsters and comfortable handles. The tip is A2 steel hardened to Rc60-62 for toughness, and can be replaced if damaged.
The bolster, made from stainless steel, transitions smoothly into the taper of the handle to provide a larger hand contact area. The hard maple handles have been torrefied, a heating process that changes...
Veritas Miniature Hold-Down
This 1:3 scale miniature version the Veritas hold-down can secure work vertically on small projects, such as when cleaning up dovetails or chopping mortises.
The low-profile 3'' cast steel arm is unobstructed at the clamping end, allowing good access to work from all sides. Simply turn the brass knob to apply the desired amount of clamping force. The 3'' post fits in a 17/64''...
Veritas Mitre Saddle
When working on small items such as picture frames, a large combination square or try square can often be cumbersome. Not so with the new Veritas mitre saddle. The relatively small size makes it easy to use.
Despite its small size, it still has a large reference face (3-1/2" at the wide end) set at 45°. The leg measures 1" wide by 2-1/4" long. As with the saddle squares, the sides are machined...
Veritas Set of 3 Miniature Chisels
This chisel set is the latest addition to the Veritas line of fully functional miniature tools. Made at about 1/3 the scale of our regular bench chisels, each is only about 3-1/4" long overall and weighs less than a third of an ounce. At this scale, the three tools in the set have 3/8", 1/4" and 1/8" wide blades. All permit a delicate touch where fine, controlled cuts are needed.
Their...
Veritas Short Blade Honing Guide
A frequent challenge faced by sharpeners of all skill levels is the safe and accurate honing of small or short blades. Spokeshave, small block plane and palm plane blades are too small for most guides. This short blade honing guide has the flexibility to hold small blades that other honing guides cannot handle.
Blades up to 2 5/8'' wide are easily aligned with the included registration jig...
Veritas Variable Burnisher
Cabinet scrapers are among the most useful (and least expensive) tools in a woodworking shop. Unfortunately, many woodworkers have difficulty putting the optimum hook on a scraper for the job at hand. Since scrapers have four working edges, it is possible to make one into a highly versatile tool with each edge having a different cutting characteristic. The problem most people have is choosing the...
Veritas Small Journeyman's Mallet
The Veritas Small Journeyman's Mallet has a solid brass head, a walnut handle and a simple, refined profile, making it an elegant and effective mallet.
Designed for work that requires more finesse than power, it can be held by the handle or used with the head cradled in your palm, allowing you to more precisely control the force of blows. The head is attached to the handle with a blind threaded...
Veritas Aluminium Straightedges
These anodized aluminium straight edges are 1¾" high and 7/16" wide, and will not rust. The reference edge is machined flat to within 0.003" over the entire length. They are available in three lengths, 24", 38" and 50". The 24" straight edge weighs 1lb, the 38" weighs just under 2lb, and the 50" version weighs 2.5lb.
Veritas Bevel-Up Smoother Plane + PM-V11 Blade
The latest addition to the Veritas family of low-angle bench planes is the state-of-the-art pure smoothing plane. It is the plane to use for the final finish on surfaces, especially woods of difficult grain patterns. It also complements the low-angle jack plane.
Veritas have combined the generous width and weight of a dedicated smoother with the versatile inner workings of a low-angle bevel-up...
Veritas Bevel Gauge
Half the secret of sharpening is the control of blade geometry.
Nothing is handier than a bevel gauge for quickly checking the grind angle of chisels, plane blades, turning tools, etc. A quick check confirms the angle last used for grinding or honing so that the edge geometry can be maintained.
Our bevel gauge has seven individual slots that will measure the most commonly used angles from 15°...