New Veritas Micro-Adjust Wheel Marking GaugeNew Veritas Micro-Adjust Wheel Marking Gauge
New Veritas Micro-Adjust Wheel Marking Gauge
Veritas have refined and redesigned their ever popular wheel marking gauges. This new micro-adjust wheel marking gauge draws on two decades of manufacturing experience, with subtle improvements across the board. The adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of...
£44.00 inc VAT
Veritas Carpenter's GaugeVeritas Carpenter's Gauge
Veritas Carpenter's Gauge
Specifically designed to be carried in an apron or pocket, this is both a direct-reading compass and a marking gauge, two things that carpenters frequently need but find hard to carry. It has a rotatable head, which locks vertically for use and horizontally for storage and tip protection. It is direct reading, both for radius and diameter, in inches and centimetres. If you have ever measured a...
£22.85 inc VAT

Veritas Micro Adjust Marking GaugeVeritas Micro Adjust Marking Gauge
Veritas Micro Adjust Marking Gauge
The Veritas wheel marking gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro-adjust feature. It is similar to our standard wheel marking gauge with an anodized aluminium body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly...
from £33.80 inc VAT
Veritas Dual Marking Gauge
Veritas Dual Marking Gauge
The Veritas Dual Marking Gauge has two independently adjustable rods, which will allow you to set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions. Projection up to 5-3/4" is easy to set, since an internal O-ring keeps light but constant friction on each rod; a thumbscrew firmly locks rods in place. Like other Veritas marking...
£46.90 inc VAT

Veritas Standard Marking Gauge
Veritas Standard Marking Gauge
Standard Gauge - pretty much the same construction as the micro adjust but these are slighly shorter at 6" and do not have the micro adjust feature.
£29.65 inc VAT
Tite-Mark Standard
Tite-Mark Standard
The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark Standard (7" long shaft) is built around a 5/16"...
£109.00 inc VAT

Tite-Mark Long
Tite-Mark Long
The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head.
£119.00 inc VAT
Joseph Marples Trial 1 - Combined Marking & Mortice GaugeJoseph Marples Trial 1 - Combined Marking & Mortice Gauge
Joseph Marples Trial 1 - Combined Marking & Mortice Gauge
The Joseph Marples Trial 1 Screwslide Marking and Mortice Gauge has a full 1/8" thick brass face. The stock is locked on to the stem by brass knurled thumbscrew and protective pressure pad. The locking screw is set within a traditional brass protective shield. A screw slide gives fine and precise adjustment of the mortice pins and on the back of the stem is a single marking gauge pin.
£54.00 inc VAT

Veritas Miniature Marking GaugesVeritas Miniature Marking Gauges
Veritas Miniature Marking Gauges
These are fully working versions of the Veritas wheel marking and dual marking gauges, but only one third of the size. Their smaller scale allows greater control and makes these exquisite tools perfect for small marking tasks that require a delicate touch. Each is 57mm long and weighs just over 14g and 21g respectively. Like their full-size counterparts, they cut (not tear) fibres for clear marks...
£36.30 inc VAT
Replacement Blade for Tite-Mark Marking Gauge
Replacement Blade for Tite-Mark Marking Gauge
Replacement Blade for Tite-Mark Standard and Long Marking Gauges.
£9.80 inc VAT

Tite-Mark - Mortice Blades (pair)
Tite-Mark - Mortice Blades (pair)
Pair of Mortice Blades for laying out mortices for Tite-Mark Standard and Long Marking Gauges
£33.00 inc VAT
Tite-Mark Extensions
Tite-Mark Extensions
A pair of extension rods to fit the Tite-Mark Standard. One 3" (7.62cm) and one 6" (15.24cm) extension rod may be used individually or joined together to extend the reach of the Titemark an extra 9" (22.86cm) by being screwed onto the blade end.
£22.50 inc VAT

Tite-Mark Fixed Width Mortice Blades
Tite-Mark Fixed Width Mortice Blades
Tite-Mark fixed width mortice blades - set of 4 with hex key. 1/2", 3/8", 5/16" and 1/4" for Tite-Mark Standard and Long Marking Gauges
£78.00 inc VAT
Tite-Mark Scoring Blade
Tite-Mark Scoring Blade
Tite-Mark scoring blade for deep marking, slicing veneer strips and other general scoring tasks for the Tite-Mark Standard and Long Marking Gauges
£14.40 inc VAT

Veritas Marking Gauge Replacement Wheel
Veritas Marking Gauge Replacement Wheel
Replacement wheel for Veritas gauges. Not suitable for the new style micro-adjust marking gauge.
£3.85 inc VAT
Veritas Marking Gauge Replacement Wheel - (Inside)
Veritas Marking Gauge Replacement Wheel - (Inside)
Replacement wheel for the Dual Marking gauges. Both the Inside and Outside cutters are required for the Dual Marking gauge.
£4.75 inc VAT

Veritas Marking Gauge Replacement Wheel - (Outside)
Veritas Marking Gauge Replacement Wheel - (Outside)
Replacement wheel for the new style Micro-adust and Dual Marking gauges. Both the Inside and Outside cutters are required for the Dual Marking gauge.
£4.75 inc VAT
Veritas Marking/Mortice Gauge HeadsVeritas Marking/Mortice Gauge Heads
Veritas Marking/Mortice Gauge Heads
Though designed for use with their Veritas® Wheel Marking Gauges, these gauge heads are a simple retrofit for any marking gauge with a 5/16" diameter shaft. Made from carbon steel, the 5/8" diameter wheel cutters will scribe at any point in their circumference and slice rather than tear fibers for clean, accurate cuts. The single-bevel cutters are usable in-line for marking parallel lines, or...
£12.95 inc VAT

Veritas Micro-Adjust Rod for Wheel Marking Gauges
Veritas Micro-Adjust Rod for Wheel Marking Gauges
We offer the micro-adjust rod separately from the gauge body to let you easily upgrade a Veritas standard wheel marking gauge you own with the new adjustment mechanism.
£30.00 inc VAT
Veritas Shaft Clamp for Dual Marking Gauge
Veritas Shaft Clamp for Dual Marking Gauge
On occasions, it may an advantage to lock the relative position of the two rods on the Veritas® Dual Marking Gauge, such as when a project requires a constant mortise size, but different offsets. The shaft clamp lets you lock the relative position of the cutters while still being able to adjust the fence for offset. This allows you to preserve identical mortise or tenon sizing when joining parts...
£8.65 inc VAT

Crucible Bench SquareCrucible Bench Square
Crucible Bench Square
The Crucible Bench Square is a handy, lightweight and accurate tool that's useful for many woodworking operations. Based on an 18th-century square in A.J. Roubo's masterpiece, "l'Art du menuisier", this version uses modern technology to ensure it is accurate and stays that way. The Bench Square is great for checking a board's edge when planing joints for a panel glue-up....
£28.00 inc VAT
Joseph Marples 12" Try SquareJoseph Marples 12" Try Square
Joseph Marples 12" Try Square
The Joseph Marples Trial 1 12" Try Squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges. They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
£36.00 inc VAT

Joseph Marples 6" Try SquareJoseph Marples 6" Try Square
Joseph Marples 6" Try Square
The Joseph Marples Trial 1 6" squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges. They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
£24.50 inc VAT
Joseph Marples 9" Try SquareJoseph Marples 9" Try Square
Joseph Marples 9" Try Square
The Joseph Marples Trial 1 9" squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges. They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
£28.00 inc VAT

Joseph Marples Trial 1 - 10" Mitre SquareJoseph Marples Trial 1 - 10" Mitre Square
Joseph Marples Trial 1 - 10" Mitre Square
The Joseph Marples Trial 1 Double Brass Faced Mitre Square is a tool based on designs that were last made over 70 years ago which were marked with the Trial 1 brand or corporate mark. This high quality Mitre Square has a blade length of 10" (250mm) which is made from chemically blacked spring steel. This Mitre Square is made from either Walnut or Rosewood and has four brass diamond rivets...
£39.50 inc VAT
PEC Tools 12' Solid SquarePEC Tools 12' Solid Square
PEC Tools 12' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade. The solid squares have true right angles; both inside and out. (Squareness within 0.0006"). They are made from high quality harden tool steel and the beams and blades are precision ground and hardened. Made in the USA
£108.00 inc VAT

PEC Tools 2' Solid SquarePEC Tools 2' Solid Square
PEC Tools 2' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade. The solid squares have true right angles; both inside and out. (Squareness within 0.0006"). They are made from high quality harden tool steel and the beams and blades are precision ground and hardened. Made in the USA
£22.00 inc VAT
PEC Tools 3' Solid SquarePEC Tools 3' Solid Square
PEC Tools 3' Solid Square
The PEC Tools 3" Solid Square has a 3" long blade. The length of blade is measured from inner edge of the beam to the end of the blade. The solid squares have true right angles; both inside and out. (Squareness within 0.0006"). They are made from high quality harden tool steel and the beams and blades are precision ground and hardened. Made in the USA
£23.65 inc VAT

PEC Tools 4' Solid SquarePEC Tools 4' Solid Square
PEC Tools 4' Solid Square
The PEC Tools 4" Solid Square has a 4" long blade. The length of blade is measured from inner edge of the beam to the end of the blade. The solid squares have true right angles; both inside and out. (Squareness within 0.0006"). They are made from high quality harden tool steel and the beams and blades are precision ground and hardened. Made in the USA
£27.50 inc VAT
PEC Tools 6' Solid SquarePEC Tools 6' Solid Square
PEC Tools 6' Solid Square
The PEC Tools 6" Solid Square has a 6" long blade. The length of blade is measured from inner edge of the beam to the end of the blade. The solid squares have true right angles; both inside and out. (Squareness within 0.0006"). They are made from high quality harden tool steel and the beams and blades are precision ground and hardened. Made in the USA
£33.00 inc VAT

PEC Tools 9' Solid SquarePEC Tools 9' Solid Square
PEC Tools 9' Solid Square
The PEC Tools 9" Solid Square has a 9" long blade. The length of blade is measured from inner edge of the beam to the end of the blade. The solid squares have true right angles; both inside and out. (Squareness within 0.0006"). They are made from high quality harden tool steel and the beams and blades are precision ground and hardened. Made in the USA
£76.45 inc VAT
Shinwa 45° Mitre Square - Metric
Shinwa 45° Mitre Square - Metric
Stainless steel mitre square. Measurements on both sides Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm Base length: 115mm
£14.00 inc VAT

Shinwa 45° Mitre Square with 90° Guide - Metric
Shinwa 45° Mitre Square with 90° Guide - Metric
Stainless steel mitre square. Measurements on both sides Angular accuracy 45°, 90° & 135°: 0.2 mm or less per 100 mm Base length: 115mm
£14.00 inc VAT
Shinwa 90° Try Square - Metric
Shinwa 90° Try Square - Metric
Stainless steel square. Measurements on both sides Angular accuracy 90°: 0.1 mm or less per 100 mm Outside measurements: 150mm Inside measurements: 120mm Base length: 100mm
£22.00 inc VAT

Shinwa Combination Square 45°, 90° & 135° - Metric
Shinwa Combination Square 45°, 90° & 135° - Metric
Shinwa Combination Metric Square made of stainless steel includes a mitre gauge and square. Measurements on both sides Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm Angular accuracy 90°: 0.1 mm or less per 100 mm Base length: 163mm
£22.00 inc VAT
Starrett Adjustable Tri-SquaresStarrett Adjustable Tri-Squares
Starrett Adjustable Tri-Squares
Starrett Adjustable 90° precision tri-squares with 1mm and 1/2mm graduations on both sides. 13MA 100mm blade 13MC 150mm blade
from £65.00 inc VAT

Starrett Combination Blades - Metric OnlyStarrett Combination Blades - Metric Only
Starrett Combination Blades - Metric Only
Available as either a 300mm or 600mm hardened steel rule available in Metric (mm and 1/2mm both sides) Satin chrome finish makes these rules much easier to read than the regular finish blades.
from £71.00 inc VAT
Starrett Combination Blades - Metric \ ImperialStarrett Combination Blades - Metric \ Imperial
Starrett Combination Blades - Metric \ Imperial
Available as either a 300mm or 600mm hardened steel rule available in Metric/Imperial (1/2mm and 32nds One Side; mm and 64ths Reverse Side) Satin chrome finish makes these rules much easier to read than the regular finish blades. Prices incl VAT
from £38.00 inc VAT

Starrett Combination Sets 300mmStarrett Combination Sets 300mm
Starrett Combination Sets 300mm
These Starrett 300mm Combination Sets are a super reliable piece of kit. The Starrett Combi set comes with three cast iron heads and a black wrinkle finish. The square head has 90° and 45° reference faces, an integral spirit level and a useful scribe. The centre head helps you find the centre of circles such as dowels. You'd probably guessed that by its name, but still a helpful...
from £149.50 inc VAT
Starrett Combination Square Attachment 1
Starrett Combination Square Attachment 1
These Starrett Combination Square Attachments fit combination square blades 1" (25mm) wide. They allow attaching rules, blades or thin steel try squares, up to 1" (25mm) wide, at right angles to the blade of the square for laying out key seats, centers, scribing horizontal lines, and measuring diameters. Blade: 1" (25mm) Range, 1 9/16" (40mm) Length.
£69.60 inc VAT

Starrett Combination Squares 90 & 45 degreeStarrett Combination Squares 90 & 45 degree
Starrett Combination Squares 90 & 45 degree
Starrett Combination Squares available in 150mm, 300mm or 600mm hardened steel rule. Cast iron head with locking nut, scribe and integral spirit level. The Metric rules have mm and 1/2mm graduations on both sides. The 300mm Metric/Imperial rule has a Satin chrome finish with 0.5mm and 32nds graduations on one Side; mm and 64ths on the reverse side.
from £71.50 inc VAT
Starrett Double Steel Square - Metric
Starrett Double Steel Square - Metric
Designed for tool and diemakers, these fine precision double steel squares from Starrett have adjustable blades, ideal for tight fits. 50mm Complete with Graduated, Graduated Narrow/Bevel Blades. Narrow blade has mm and ½mm graduations. It is 4mm wide over a length of approximately 41mm and cut away at one end to a width of 2.4mm Beveled blade is 45º on one end and 30º on the...
£154.00 inc VAT

Starrett Square Head (only)
Starrett Square Head (only)
Square Head for Combination Squares, Combination Sets and Bevel Protractors. Can be used with the following rules: Starrett Combination Blades - Metric Starrett Combination Blades - Metric/Imperial 12" and 24" Sterling Combination Square Rules 300mm and 600mm Sterling Combination Square Rules
£72.00 inc VAT
Starrett Square Head (only) for 4' Combination Squares
Starrett Square Head (only) for 4' Combination Squares
Black Wrinkle-finished, cast iron steel center head. Can be used with the following rules: Sterling Dovetail Rule
£52.50 inc VAT

Starrett Square Head (only) for 6' Combination Squares
Starrett Square Head (only) for 6' Combination Squares
Black Wrinkle-finished, cast iron steel center head. Can be used with the following rules: 6" Sterling Combination Square Rule only 100mm and 150mm Sterling Combination Square Rules only
£72.00 inc VAT
Starrett Stair Gage
Starrett Stair Gage
Starrett's stair gage fixture attachments clamp to a framing or rafter square forms a handy gage for laying out stair stingers, hip, valley, and other rafter cuts plus many unusual cuts. These fixtures have a smaller area that contacts the square blade. Fixtures are convenient, small in size and are lower in cost. Slotted to keep two opposite hexagonal faces at right angles to the edge...
£30.50 inc VAT

Starrett Student Combination Square 150mm
Starrett Student Combination Square 150mm
The Starrett Student Metric Combination Square was designed to train and develop young people including apprentices to lay out and check their work more efficiently. The combination square is far superior to clumsy, old-style solid workshop-grade squares that are still in use but at a price students can afford. The combination square can be used as a try square, 45º mitre, a depth gauge, a...
£47.50 inc VAT
Sterling Tool Works Combination Rules - MetricSterling Tool Works Combination Rules - Metric
Sterling Tool Works Combination Rules - Metric
Many have combination squares, they are usually second hand or heirlooms that have been passed down in the family. In many instances the rules are corroded and treatments to removed the rust leave them shiny and more difficult to read. Sterling Tool Works is now offering Premium replacement rules that are precision made in the USA. The rules are chemically etched, etchings blackened, tempered and satin...
from £36.00 inc VAT
Page: 1 | 2 | 3 |