Accessories for the Benchcrafted Drawsharp
Accessories for the Benchcrafted Drawsharp
Rehab kit Most knives will be in good enough condition to use the abrasives included with the Drawsharp. But for those which require more aggressive material removal (removing knicks or severely blunted edges) or for those who may not want to grind their knife, Benchcrafted offer a rehab kit with medium and coarse diamond abrasives. The kit includes two sleeves and two each of coarse and medium diamond...
from £5.50 inc VAT
Barr Gutter AdzeBarr Gutter Adze
Barr Gutter Adze
The Barr Gutter Adze is primarily used for roughing-out chair seats. It is also very useful for log scribe work, large bowl projects and totem work. It has a 30" hardwood handle which can be cut to desired length. 2 1/4" cutting edge, approx #6 sweep, overall head length is 9", head wt. approx 3lbs, handle length 30''
£210.00 inc VAT

Barr Hand Adze
Barr Hand Adze
The Barr Hand Adze is the best choice for roughing out your bowls and chair seats. Designed for maximum control the 2¼" cutting edge is just enough for the task at hand. Not too light, not too heavy it is the perfect addition to your workshop! 2¼" cutting edge, head length 8", total weight 2lbs, handle length 15"
£190.00 inc VAT
Benchcrafted DrawsharpBenchcrafted Drawsharp
Benchcrafted Drawsharp
Ease and safety With the Benchcrafted Drawsharp, the cutting edge is facing away from your body and fingers, the honing action is parallel to the blade, and your fingers are safely behind the cutting edge at all times. If you've shied away from using drawknives because of sharpening, the Drawsharp will open the door to this wonderful tool, whether you’re a chairmaker, or looking to add the drawknife...
£99.50 inc VAT

Boggs Concave SpokeshaveBoggs Concave Spokeshave
Boggs Concave Spokeshave
The Boggs Concave Spokeshave is a collaboration between Kentucky Master Chair Maker Brian Boggs and Lie-Nielsen Toolworks. A 2-5/8" diameter sole makes this tool the right choice for working chair spindles and other round parts. Weight 8 oz. Body is 9-5/8" long, A-2 blade 1-1/8" x 1/8" thick, Bronze body and cap. Hickory handles.
£155.00 inc VAT
Clifton 500 10" Convex SpokeshaveClifton 500 10" Convex Spokeshave
Clifton 500 10" Convex Spokeshave
Clifton Spokeshaves are made from virtually unbreakable spheridal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the Spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The firm seating and fine adjustment allow the woodworker to make delicate nuances in the weight of cut....
£114.00 inc VAT

Clifton 550 10" Concave SpokeshaveClifton 550 10" Concave Spokeshave
Clifton 550 10" Concave Spokeshave
Clifton Spokeshaves are made from virtually unbreakable spheridal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the Spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The firm seating and fine adjustment allow the woodworker to make delicate nuances in the weight of cut....
£114.00 inc VAT
Clifton 600 Flat 10" SpokeshaveClifton 600 Flat 10" Spokeshave
Clifton 600 Flat 10" Spokeshave
Clifton Spokeshaves are made from virtually unbreakable spheridal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the Spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The firm seating and fine adjustment allow you the woodworker to make delicate nuances in the weight...
£114.00 inc VAT

Clifton 650 Curved 10" SpokeshaveClifton 650 Curved 10" Spokeshave
Clifton 650 Curved 10" Spokeshave
Clifton Spokeshaves are made from virtually unbreakable spheridal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the Spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The firm seating and fine adjustment allow you the woodworker to make delicate nuances in the weight...
£114.00 inc VAT
Country Woodcraft: Then & Now
Country Woodcraft: Then & Now
By Drew Langsner In 1978, Drew Langsner released his book “Country Woodcraft” to the world, and it sparked a movement – still expanding today – of hand-tool woodworkers who make things with mostly green wood. The 304 pages of “Country Woodcraft” showed you how to split wood from the forest and shape into anything you might need, from a spoon to a bowl, from...
£40.00 (VAT exempt)

F180 Folding SawF180 Folding Saw
F180 Folding Saw
The Silky F180 folding saw is a lightweight folding pocket saw aimed mainly at the light pruning and gardening market. The blade is 180mm long with a large tooth configuration of 7.5 teeth per 30mm. The blade locks in two positions to allow flush cuts. The handle is constructed of fibreglass polypropylene with a rubber insert to ensure a comfortable and sure grip. It is an ideal cost-effective...
from £16.08 inc VAT
Flexcut 1' Mini Draw Knife KN17
Flexcut 1' Mini Draw Knife KN17
This miniature draw knife by Flexcut is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The flexible shank allows the cutting angle to be changed easily for contoured cuts. Made in the USA by Flexcut.
£26.75 inc VAT

Flexcut 1/8' (3mm) Scorp KN21
Flexcut 1/8' (3mm) Scorp KN21
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
£27.75 inc VAT
Flexcut 3' Draw Knife KN25
Flexcut 3' Draw Knife KN25
This handy little draw knife by Flexcut was developed for fan carving but works great for skinning small areas of bark and roughing-off corners. Made in the USA by Flexcut.
£49.25 inc VAT

Flexcut 3/16' (5mm) Scorp KN22
Flexcut 3/16' (5mm) Scorp KN22
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
£27.75 inc VAT
Flexcut 5' Flexible Draw Knife KN16
Flexcut 5' Flexible Draw Knife KN16
This flexible Flexcut draw knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape. The curved edge gives a skew-like cutting action for a low resistance cut. This...
£51.25 inc VAT

Flexcut 5/16' (8mm) Scorp KN23
Flexcut 5/16' (8mm) Scorp KN23
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
£27.75 inc VAT
Flexcut 70 deg. Scorp KN24
Flexcut 70 deg. Scorp KN24
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
£27.75 inc VAT

Flexcut Double Bevel Sloyd Hook Knife KN51
Flexcut Double Bevel Sloyd Hook Knife KN51
The Flexcut Double Bevel Sloyd Hook Knife is ideal for carving spoons, bowls, ladles and other deep hollowed work. It features a double-sided blade with a square, sharpened end. For added strength, the tang of each knife extends completely through the beautifully conditioned Cherry hardwood handle. It also features a brass ferrule for added stability. The overall length of this knife is 8½"...
£90.25 inc VAT
Flexcut Scorp Set KN150Flexcut Scorp Set KN150
Flexcut Scorp Set KN150
This Scorp set puts all of Flexcuts profiles into one handy tool roll. As an added bonus each set includes a specially shaped strop (compound not included) to help maintiain the edge of these unusually shaped tools. (Right-handed carvers - choose a right-handed tool to cut towards you - choose a to cut away from you.) Each set includes a KN21 cutting knife, KN22 detail knife, KN23 pelican knife,...
£116.00 inc VAT

Flexcut Single Bevel Sloyd Hook Knife KN52
Flexcut Single Bevel Sloyd Hook Knife KN52
The Flexcut Single Bevel Sloyd Hook Knife is perfect for forming the hollows of spoons and bowls. The deeply curved, single-edged blade is sharpened all the way to the pointed tip. For added strength, the tang of each knife extends completely through the beautifully conditioned Cherry hardwood handle. It also features a brass ferrule for added stability. The overall length of this knife is 8"...
£91.75 inc VAT
Flexcut Sloyd Knife KN50Flexcut Sloyd Knife KN50
Flexcut Sloyd Knife KN50
This Flexcut Sloyd Knife comes razor sharp and ready for use. Much like traditionally-designed Swedish tools, this carving knife is a durable, well-made tool, ideal for spoon carving, whittling, marking, and general woodworking and handicrafts. Its versatility allows you to use it for a wide range of wood carving projects from detail work to roughing. Use it to shave bark or use its fine tip for...
£60.75 inc VAT

Gransfors Bruk American Felling Axe 434Gransfors Bruk American Felling Axe 434
Gransfors Bruk American Felling Axe 434
The Gränsfors American Felling Axe is a professional axe for those who want to work in the forest in the traditional way. The axe is ideal for felling very large trees, thanks to its long, broad edge of 11.5cm. The axe is forged to a curved bit, making it suitable for cutting into fresh, resinous wood such as spruce or pine. The heavy head and long handle also give considerable power to the cut....
£165.00 inc VAT
Gransfors Bruk Axe Diamond
Gransfors Bruk Axe Diamond
Gransfors Bruk Diamond File. The file is double sided, one coarse (230grit) and one finer side (400grit). A simple wooden handle which is slightly wider near the file blade for better grip. Can be used et or dry. Complete with leather sheath.
£42.00 inc VAT

Gransfors Bruk Axe File
Gransfors Bruk Axe File
Gransfors Bruk Axe File. This is best used when the edge needs a little more work than normal. So if it has some ''dings'' that need removing. The file is double sided, one coarse and one finer side. A simple wooden handle which is slightly wider near the file blade for better grip. Can be used et or dry. Complete with leather sheath. 14cm in overall length.
£37.00 inc VAT
Gransfors Bruk Carpenter's Axe 465Gransfors Bruk Carpenter's Axe 465
Gransfors Bruk Carpenter's Axe 465
These axes have a straight edge and thin blade with low angle of the bevel face, suited for work in dry wood. The forged inward curve from the heel to the lip of the head allows your hand to grip almost straight above the centre of the edge. This, and the long straight cutting edge, gives rigidity, stability, and control when cutting. Functions like a good heavy knife. The axe poll is ground and...
£124.00 inc VAT

Gransfors Bruk Ceramic Axe Stone
Gransfors Bruk Ceramic Axe Stone
Gränsfors Bruk ceramic grinding stone is made up of ceramic abrasives. It has a coarse side with grain size 180 to deal with rough damages and a fine side with grain size 600 suitable for fine grinding and sharpening. The stone is normally used with water, but can also be used dry. The stone is round and flat with a phase around the edges to prevent chipping. The fine side is 2/3 of the total...
£31.94 inc VAT
Gransfors Bruk Froe 12' Edge 487Gransfors Bruk Froe 12' Edge 487
Gransfors Bruk Froe 12' Edge 487
Gransfors Bruk froes are the tool used to split shingles, shakes and lumber. You strike with a wooden maul or mallet, pounding the blade into the end of short logs, then quickly pulled back or pushed with the handle to split the wood. It has a 12" iron blade with an 18" hickory handle and weighs 4lbs. Please note that this tool is not provided with a grain-leather sheath but does come with...
£122.00 inc VAT

Gransfors Bruk Hand Hatchet 413Gransfors Bruk Hand Hatchet 413
Gransfors Bruk Hand Hatchet 413
The distinguishing feature of the Gränsfors Hand Hatchet is its short handle relative to the size of its head. It is extremely practical to carry in your rucksack on forest walks. The shape of the sheath, which covers the edge and the top part of the poll, also stops the axe head cutting into your rucksack. The Hand Hatchet makes an excellent scouting and camping axe. Despite its short handle, the...
£120.00 inc VAT
Gransfors Bruk Hunter's Axe 418Gransfors Bruk Hunter's Axe 418
Gransfors Bruk Hunter's Axe 418
The Gransfors Bruk Hunter's Axe is specially made for hunters. The Poll is forged thinner than normal and gently rounded and burnished to a Flay Poll to be used when skinning an animal. It is also good for chopping wood as well as meat and bones. The grip of the handle has circular grooves which gives a steady grip even if your hands are wet or sticky. This axe has received, as the first and only...
£135.00 inc VAT

Gransfors Bruk Large Carving Axe 475Gransfors Bruk Large Carving Axe 475
Gransfors Bruk Large Carving Axe 475
A chop axe for hewing bowls and other wooden objects, artistic wood carving and architectural work. The characteristic curved shape of the cutting edge, carried well above the head’s eye, the position of the edge in proportion to the handle, the rather thick bit and the big angle of the wide beveled face makes the axe a good carving tool. You "cut on the beveled face" with curved movements. This...
£155.00 inc VAT
Gransfors Bruk Large Splitting Axe 442 - Standard 27' HandleGransfors Bruk Large Splitting Axe 442 - Standard 27' Handle
Gransfors Bruk Large Splitting Axe 442 - Standard 27' Handle
Designed for splitting chunks of wood, "rounds". The axe head is quite heavy with forged cheeks on both sides of the blade, "splitting wedge shaped crests" which power apart the grain of the wood. A Splitting Axe does not just have to slice into the wood - the thick axe blade pushes the wood apart. The poll of this axe, like the poll on most axes, is definitely not designed for heavy pounding...
£155.00 inc VAT

Gransfors Bruk Large Splitting Axe 445 - Long 31' HandleGransfors Bruk Large Splitting Axe 445 - Long 31' Handle
Gransfors Bruk Large Splitting Axe 445 - Long 31' Handle
The same as the Gransfors Large Splitting Axe 442 but with a longer 31" hickory handle. Ideal for taller users or when more power is required. Danger: Always wear adequate clothing and protection for your face and eyes. The poll of this axe, like the poll on most axes, is definitely not designed for heavy pounding on a wedge. The axe has a 3" face and a 31" hickory handle and weighs just...
£155.00 inc VAT
Gransfors Bruk Leather Sheath
Gransfors Bruk Leather Sheath
Replacement leather sheaths for Gransfors axes. Made from vegetable-tanned leather which is a little ''greener'' than other tanned leathers.
£17.00 inc VAT

Gransfors Bruk Outdoor Axe 425Gransfors Bruk Outdoor Axe 425
Gransfors Bruk Outdoor Axe 425
The Gransfors Bruk Outdoor Axe was inspired and co-developed by Scandinavian survival expert Lars Fält. The handy design with iron sheathed hickory handle is well-balanced, fits into any backpack and expertly handles any outdoor task. The head weighs 350g (12oz) and has blade length of 65mm (2½"). Overall length 370mm (14½"). Book and protective leather sheath included.
£130.00 inc VAT
Gransfors Bruk Scandinavian Forest Axe 430Gransfors Bruk Scandinavian Forest Axe 430
Gransfors Bruk Scandinavian Forest Axe 430
A profesional axe for those who want to limb a felled tree in a traditional way. Forged to a thin, curved "bit" and sharpened to make it suitable for cutting branches in fresh, resinous wood, spruce or pine. The long handle gives extra strength and power to the cut. The axe has a 3½" face and a 25" hickory handle and the head weighs 2 lb. Book and protective leather sheath included.
£130.00 inc VAT

Gransfors Bruk Small Forest Axe 420Gransfors Bruk Small Forest Axe 420
Gransfors Bruk Small Forest Axe 420
Gransfors Bruks Small Forest Axe 420 is one of the most popular from the Gransfors Bruks range. The same size as the Hunters Axe but with a more traditional pattern and poll. The blade is thin. The handle is long enough to allow powerful chopping but not too long so it will fit into a rucksack, the back of a car or a boat. Practical for splitting small sticks for the fire or cutting small-diameter...
£114.00 inc VAT
Gransfors Bruk Small Hatchet 410Gransfors Bruk Small Hatchet 410
Gransfors Bruk Small Hatchet 410
The Gransfors Bruk small hatchet is the baby of them all weighing just 11 ounces and with a 2½" face and 11" hickory handle. Ideal for splitting kindling. Book and protective leather sheath included.
£108.00 inc VAT

Gransfors Bruk Small Splitting Axe 441Gransfors Bruk Small Splitting Axe 441
Gransfors Bruk Small Splitting Axe 441
Can be managed with one hand. Forged and ground to a concave, quite thin blade at the "bit". This design helps the axe to enter the wood rapidly and to efficiently split it when the thicker part follows to push the wood apart. The poll of this axe, like the poll on most axes, is not designed for pounding on a wedge. The head weighs 2 lb. The face is 2½". The 20" hickory handle has circular grooves...
£138.00 inc VAT
Gransfors Bruk Splitting Hatchet 439Gransfors Bruk Splitting Hatchet 439
Gransfors Bruk Splitting Hatchet 439
The splitting Hatchets blade starts off concave and fairly thin, allowing easy penetration into the wood, where upon the thickening axe head exerts enormous splitting pressure. The small splitting axe, with 2½ lb. head, 2½" face & 16" textured hickory handle, is ideal for splitting kindling & smallish stove wood. It is designed for one-handed use. Note this axe’s poll is not hardened for use...
£135.00 inc VAT

Gransfors Bruk Splitting Maul 450Gransfors Bruk Splitting Maul 450
Gransfors Bruk Splitting Maul 450
Also names Hammer-poll Axe. Designed for splitting apart large chunks of wood or "rounds". The Maul’s head is heavier and the cheek flare far wider behind the cutting edge compared with the Splitting Axes. The poll is designed for pounding on a splitting wedge. The axe has a 2½" face and a 31" hickory handle and the head weighs 5½ lb. Danger: Always wear adequate clothing and protection...
£155.00 inc VAT
Gransfors Bruk Splitting Wedge 460Gransfors Bruk Splitting Wedge 460
Gransfors Bruk Splitting Wedge 460
Forged steel wedge. Twisted for maximum splitting. The poll has ground edges. The wedge has a 1¾" face, weighs 4 lb. Danger: Always wear adequate clothing and protection for your face and eyes. Book and protective leather sheath included.
£72.50 inc VAT

Gransfors Bruk Swedish Broad AxesGransfors Bruk Swedish Broad Axes
Gransfors Bruk Swedish Broad Axes
The pattern of the Gransfors Broad Axe and the handle is based on old Swedish logging techniques for squaring logs and structural timbers of all kinds. Has sufficient space between the "blade’s beard" and the handle for the user’s fingers. There are different options of bevels (double, left or right). You also have handle options of straight (so the blade is in line with the...
£215.00 inc VAT
Gransfors Bruk Swedish Drawknife 486Gransfors Bruk Swedish Drawknife 486
Gransfors Bruk Swedish Drawknife 486
This is a big beast and popular for quick removal of bark from logs and other large trimming work. The hickory handles are set on full-length tangs extending straight out from the ends of the blade. The blade is bowed up and curved forward in the centre for effective peeling, shaping and smoothing. The total length is 22½". The blade is 11½" in length and 1½" wide. It weighs 1lb. 5oz. The tool...
£158.00 inc VAT

Gransfors Bruk Wildlife Hatchet 415Gransfors Bruk Wildlife Hatchet 415
Gransfors Bruk Wildlife Hatchet 415
The Gransfors Bruk Wildlife Hatchet is a small, light axe which can be easily carried, protected by its leather sheath, inside your backpack or on your belt. With this small axe you can cut branches in the garden or chop and split sticks for a camp fire. This little hatchet may awake memories and dreams of exciting camps and adventures. Length including the Hickory handle is 34cm (13.5")....
£123.00 inc VAT
Henry Taylor Bowl AdzeHenry Taylor Bowl Adze
Henry Taylor Bowl Adze
Sheffield made hand forged adzes by Henry Taylor for single handed use. This one is a tight gouge (sweep 9), however this lucky fella is outcannel which makes it a Bowl Adze. At the other end to the cutting edge is a square faced hammer poll. All Henry Taylor adzes have an ash handle of 250mm (about 10") . The overall head size (from the square face of the hammer poll to the cutting edge)...

5

£96.00 inc VAT

Henry Taylor Hand Adze Deep Curved BladeHenry Taylor Hand Adze Deep Curved Blade
Henry Taylor Hand Adze Deep Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use. There is a choice of 3 adzes; this one is a tight incannel gouge (sweep 9), and is offered with an incannel or outcannel grind. The outcannel grind is favoured by those working concave surfaces as it allows the leading edge to enter the working area easier. At the other end to the cutting edge is a square faced hammer...
£96.00 inc VAT
Henry Taylor Hand Adze Shallow Curved BladeHenry Taylor Hand Adze Shallow Curved Blade
Henry Taylor Hand Adze Shallow Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use. There is a choice of 3 adzes, this one a gouge end with a shallow/mid gouge or there is a tight gouge (sweep 9) and a 50mm (2") straight edge (like a chisel). At the other end to the cutting edge is a square faced hammer poll. All the adzes have an ash handle of 250mm (about 10") . The overall head size (from the...
£93.60 inc VAT
Page: 1 | 2 | 3 |