12 Pocket Leather Chisel Roll
12 Pocket Leather Chisel Roll
The Connell Leather Chisel Roll has 12 pockets, with top and tail design for better protection. Will accept chisels up to 275mm (11') long. Rolls up neatly for easier storage. Made from soft moss backed leather for durability Pockets reinforced with brass rivets. Ties for secure fastening.
£39.95 inc VAT
30mm Replacement Cutter for Arbortech Ball Gouge
30mm Replacement Cutter for Arbortech Ball Gouge
This cutter is for the Arbortech Ball Gouge. The Arbortech Ball Gouge is a unique tool designed for power carving. It has a cutting ring on a 30mm spherical ball with a 90mm arm that attaches to any standard 100mm (4") or 115mm (4½") angle grinder. The cutting action produces fine shavings rather than dust. This ball gouge gives you the ability to make smooth hollows and concave recesses...
£26.50 inc VAT

8 Pocket Leather Chisel Roll8 Pocket Leather Chisel Roll
8 Pocket Leather Chisel Roll
The Connell Leather Chisel Roll has 8 pockets with top and tail design for better protection. Will accept chisels up to 275mm (11') long. Rolls up neatly for easier storage. Made from soft moss backed leather for durability Pockets reinforced with brass rivets. Ties for secure fastening.
£33.95 inc VAT
Accessories for the Veritas Wood Carver's ViceAccessories for the Veritas Wood Carver's Vice
Accessories for the Veritas Wood Carver's Vice
Accessories for the Veritas Wood Carver's Vice: Dog Hole Mount Assembly: The vice can be side or top mounted through any standard 3/4" dia. dog hole using the auxiliary rod/sleeve/wing-nut assembly, usable on benches from 5/8" to 4" thick. 3 1/2" Mounting Plate: 3-1/2" dia. by 1/2" thick mounting plate with a steel rod. 2" Mounting Plate: For mounting smaller pieces, such as duck heads or bird...
from £9.50 inc VAT

Arbortech 50mm Heavy Duty Abrasive DiscsArbortech 50mm Heavy Duty Abrasive Discs
Arbortech 50mm Heavy Duty Abrasive Discs
These 50mm diameters, sanding discs extend the scope of the Arbortech Contour Sander, Arbortech Mini TURBO Plane Kit and the Mini Carver. They are heavy-duty to withstand harsh conditions when power sanding. The cloth-backed abrasive, unaffected by heat generated during power sanding, has an exceptionally long life. Supplied in packs of 20 discs of a single grit, ranging from very coarse 40 grit...
£16.50 inc VAT
Arbortech Ball GougeArbortech Ball Gouge
Arbortech Ball Gouge
The Arbortech Ball Gouge is a unique tool designed for power carving. It has a cutting ring on a 30mm spherical ball with a 90mm arm that attaches to any standard 100mm (4") or 115mm (4½") angle grinder. The cutting action produces fine shavings rather than dust. This ball gouge gives you the ability to make smooth hollows and concave recesses in spoons or small bowls and safely undertake freehand...
£99.50 inc VAT

Arbortech Contour SanderArbortech Contour Sander
Arbortech Contour Sander
The Arbortech Contour Sander is solidly made, ingeniously designed and precision engineered. It uses an innovative new design resulting in a true random orbit action that is only evident when the disc is applied to the work. It gives an excellent finish free of sanding marks and won't leave the friction burns that a spinning pad is prone to do. The sander is designed to fit a 100 or 110mm portable...
£85.00 inc VAT
Arbortech Industrial Pro Kit
Arbortech Industrial Pro Kit
- Fast, safe & controllable - Will not bind or grab on tight curves - perfect for shaping & fast removal - Extremely hard cutting edge & a resilient inner core for high speed work - Blade hardened to 40 Rockwell C (can be sharpened with a chainsaw file or ceramic sharpening stone) - Fits 100mm &115mm grinders The Arbortech Industrial Woodcarver is a unique tungsten carbide tipped cutter...
from £137.00 inc VAT

Arbortech Mini CarverArbortech Mini Carver
Arbortech Mini Carver
The Arbortech Mini Carver is a tool much appreciated by professional and amateur carvers alike. It can reach into areas, where the standard Arbortech will not work. The Mini Carver has been udated and improved to help rough shape, sculpt or sand. The compact size offers detailed carving capabilities and manoeuvrability. The Mini Carver is the ideal power tool for wood sculptors and carvers who value...
£278.00 inc VAT
Arbortech Mini Carver 50mm (2') Diamond Blade
Arbortech Mini Carver 50mm (2') Diamond Blade
50mm (2") diamond blade, will fit the Arbortech mini carver. Can be used to cut or grind tiles and stone, also grind and sharpen tungsten carbide.
£17.50 inc VAT

Arbortech Mini Carver Industrial 50mm (2') TCT Mini Cutter
Arbortech Mini Carver Industrial 50mm (2') TCT Mini Cutter
50mm (2") TCT mini cutter blade, will fit the Arbortech Mini-Grinder. Fitted with 2 x Tungsten Carbide teeth to help cut the toughest of woods.
£43.50 inc VAT
Arbortech Mini Carver Sanding Discs
Arbortech Mini Carver Sanding Discs
50mm sanding pads and disc for the Arbortech Mini Carver. Contains 1 each of the 40, 60, 80 &120 grits.
£14.50 inc VAT

Arbortech Mini ProArbortech Mini Pro
Arbortech Mini Pro
This 50mm diameter blade from Arbortech cuts on both its face and edge thanks to the 2 tungsten carbide teeth. The tungsten teeth are circular and can be turned to give fresh cutting edges. Designed to fit the Arbortech Mini Carver
£95.00 inc VAT
Arbortech Mini Turbo Blade Kit
Arbortech Mini Turbo Blade Kit
The Arbortech Mini TURBO Kit is a revolution in wood sculpting. This unique tool is designed to fit the Arbortech Mini Grinder and most 100mm or 115mm angle grinders using the supplied extension adaptor. The blade is precision machined from high quality steel and fitted with wo tungsten carbide teeth. The cutting teeth are rotatable, resharpenable and replaceable but it maybe some time before...
£127.50 inc VAT

Arbortech Mini Turbo Replacement Teeth and Screws
Arbortech Mini Turbo Replacement Teeth and Screws
This pair of tungsten carbide teeth is for use on the Arbortech Mini Turbo Blade and the Turbo Shaft. Includes Screws.
£33.68 inc VAT
Arbortech Pad for Heavy Duty Abrasive DiscsArbortech Pad for Heavy Duty Abrasive Discs
Arbortech Pad for Heavy Duty Abrasive Discs
This Arbortech Backing Pad fits the Contour Sander, Mini Turbo Kit and Mini Carver. The backing pad is made from rubber and has flexible edges to allow the pad to follow the curvatureof your work. They are used in conjunction with Arbortech 50mm Heavy Duty Abrasive Discs.
£16.50 inc VAT

Arbortech Power Carving UnitArbortech Power Carving Unit
Arbortech Power Carving Unit
The Arbortech Power Carving Unit comes with a chip catcher, levelling guide, sanding pad, fan and chip tube. As an alternative to an 'off the shelf' angle grinder, the Power Carving Unit, designed by the R&D department at Arbortech, helps you get the most out of any Arbortech attachment. It is specifically created to optimise all the Arbortech accessories, and ensures you can achieve the best results....
£278.00 inc VAT
Arbortech Power Carving Unit Sanding Discs
Arbortech Power Carving Unit Sanding Discs
Packs of 100mm diameter sanding discs for the Arbortech Power Carving Unit. The discs feature hook and loop backing for quick abrasive change, allowing you to reuse partially worn discs. Available in single grit packs of 8, or mixed pack of 12 (3 of each grit).
from £14.88 inc VAT

Arbortech Power ChiselArbortech Power Chisel
Arbortech Power Chisel
The Arbortech Power Chisel is a freehand power-carving tool that enables you to carry out detailed carving and controlled chiselling as well as rapid waste removal. Built around the dedicated Arbortech grinder motor, it does everything a traditional mallet and chisel will do, only easier and faster. The Power Chisel is extremely easy and safe to use. The chisel only engages and starts to move when...
£278.00 inc VAT
Arbortech Power Chisel Woodcarver's Starter KitArbortech Power Chisel Woodcarver's Starter Kit
Arbortech Power Chisel Woodcarver's Starter Kit
Made specifically to fit the Arbortech Power Chisel, this is a 5 piece set of carefully selected tools suitable for a wide range of projects. Comprises: 7mm Gouge No.11 Sweep, 7mm Gouge No.8 Sweep, 20mm Gouge No.9 Sweep, 8mm 60° Vee Chisel and 18mm 90° Vee Chisel.
£100.00 inc VAT

Arbortech Precision Carving SystemArbortech Precision Carving System
Arbortech Precision Carving System
The Arbortech Precision Carving System is designed for free form carving, sculpting, detailing and texturing. The system consists of a Universal Base, which fits onto either the Arbortech Power Carving Unit or a 100mm or 115mm angle grinder with an M14 thread. Into this base you have the choice of attaching either the Ball Gouge, Barrel Carver or Drum Sander. The system also contains two sanding...
£159.00 inc VAT
Arbortech Sanding Pad for Power Carving Unit
Arbortech Sanding Pad for Power Carving Unit
100mm sanding pad for the Arbortech Power Carving Unit is slightly flexible, making it good for sanding medium to large projects and capable of moulding to slight contours. It has a hook and loop facing for rapid abrasive changing. Use the Sanding Pad in combination with the Chip Catcher and attach to a vacuum for wood dust control or with the Levelling Guide to achieve flat, smooth surfaces.
£27.98 inc VAT

Arbortech Turbo PlaneArbortech Turbo Plane
Arbortech Turbo Plane
A great addition to the very popular Arbortech range of products. Using this cutter is just like adding a rotary plane to your angle grinder. Already proving to be very popular with wood carvers and sculptors it removes stock very quickly and leaves a great finish. Can be used on green or seasoned timber. The three durable tungsten carbide blades hold their edge well but can be easily sharpened using...
£148.98 inc VAT
Arbortech Turbo ShaftArbortech Turbo Shaft
Arbortech Turbo Shaft
The TURBOShaft is a power carving attachment for use fitted to a 100mm (4") or 115mm (4½") angle grinder. Designed to complement the Arbortech TURBO range or as a stand-alone tool. The TURBOShaft provides the means to carry out detailed freehand carving. It combines efficiency with exceptional control. The TURBOShaft has replaceable carbide teeth offering excellent performance and durability even...
£98.50 inc VAT

Auriou 4 in 1 RaspAuriou 4 in 1 Rasp
Auriou 4 in 1 Rasp
Flat on one side, convex on the other, with two stitches (grain 7 & 9). Use the finer stitch across the grain and the coarser stitch with grain when speed and close dexterity are needed. Useful for stickmakers and knife handle makers.
£78.00 inc VAT
Auriou Albi Combination RaspsAuriou Albi Combination Rasps
Auriou Albi Combination Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE. These are stitched on both sides with one "safe edge". The rasp is thinner close to its tip to allow ease of entry into your workpiece. For flat and convex work only. As normal, the longer the rasp, the coarser it is. We offer 2 sizes. The sizes shown are the rasp dimensions without the handle. The...
from £84.00 inc VAT

Auriou Allongee Gouge Series No.3Auriou Allongee Gouge Series No.3
Auriou Allongee Gouge Series No.3
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from this ''Basic'' range please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
from £32.40 inc VAT
Auriou Allongee Gouge Series No.5 - 20mm (3/4")
Auriou Allongee Gouge Series No.5 - 20mm (3/4")
This Auriou 20mm (3/4") Allongee Gouge forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. The chisels are allongee chisels with a slim blade section. Allongee is a style of blade that...
£41.58 inc VAT

Auriou Allongee Gouge Series No.6Auriou Allongee Gouge Series No.6
Auriou Allongee Gouge Series No.6
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" and Letter Carving Tools carving tools. To view more tools from these ranges please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
from £35.47 inc VAT
Auriou Allongee Gouge Series No.9Auriou Allongee Gouge Series No.9
Auriou Allongee Gouge Series No.9
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from this ''Basic'' range please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
from £38.28 inc VAT

Auriou Cabinet Maker's Rasps
Auriou Cabinet Maker's Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE. These are the basic rasps for shaping work. They are relatively wide in proportion to their length giving you considerable cutting power. You will get surprisingly smooth finishes to your work. As a general guide you should chose a rasp which is 3/4 times longer then the width of the piece you are shaping. As an example...
from £92.40 inc VAT
Auriou Cranked Neck Curved Ironing Rasps
Auriou Cranked Neck Curved Ironing Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE. These are very useful for working in small areas. The rasp is short and is curved along its length so you can enter your work easily. The tang is cranked to allow knuckle clearance. 4 sizes and grains based on width:- 10mm wide Grain 12 15mm wide Grain 11 20mm wide Grain 10 25mm wide Grain 09 30mm wide Grain...
from £54.00 inc VAT

Auriou Curving (Chairmakers) RaspAuriou Curving (Chairmakers) Rasp
Back In Stock
Auriou Curving (Chairmakers) Rasp
Called a curving rasp but also known as a chair makers rasp due to its usefulness for shaping the crest rail or seat of a chair or working any large concave surface. Michel Auriou also comments that this rasp is effective when working along the grain and is very useful in shaping cabriole legs. 250mm (10") overall with coarse grain 7 teeth for rapid stock removal. One end is a tapered half-round...
£75.60 inc VAT
Auriou Double Bevel Fishtail Chisel - 14mm (9/16")Auriou Double Bevel Fishtail Chisel - 14mm (9/16")
Auriou Double Bevel Fishtail Chisel - 14mm (9/16")
This Auriou Double Bevel Fisthail Chisel - 14mm (9/16") forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Auriou woodcarving tools have been among Chris Pye's favourite tools since...
£31.20 inc VAT

Auriou Double Bevel Lettering ChiselsAuriou Double Bevel Lettering Chisels
Auriou Double Bevel Lettering Chisels
This range of double bevel lettering chisels forms the backbone of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. The chisels are allongee chisels with a slim blade section. Allongee is a style of blade...
from £30.00 inc VAT
Auriou Fishtail Gouge Series No.4 - 10mm (13/32")Auriou Fishtail Gouge Series No.4 - 10mm (13/32")
Auriou Fishtail Gouge Series No.4 - 10mm (13/32")
This Auriou Fishtail Gouge Series No.4 - 10mm (13/32") forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Auriou woodcarving tools have been among Chris Pye's favourite tools since...
£40.80 inc VAT

Auriou Locksmiths RaspAuriou Locksmiths Rasp
Auriou Locksmiths Rasp
This is a very typical old French combination shaped rasp. It is called a locksmiths rasp and has a large knife shaped end and a rat tail end. It is 250mm overall (10 inches) and is used to shape mortises or grooves, not just by locksmiths nowadays but used by sculptors. Grain 9.
£86.40 inc VAT
Auriou Modellers Rasps
Auriou Modellers Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE. These are similar to cabinet rasps but are not as wide relative to their length. This allows you to work in tighter spaces. They are for more delicate shaping work and complement the work done by cabinet makers rasps. The 6" (150mm) grain 15 rasp is for making very fine refinements to your work whilst the 7"...
from £84.00 inc VAT

Auriou Needle RaspsAuriou Needle Rasps
Auriou Needle Rasps
1/2 round, flat, rat tail and knife shaped needle rasps, very fine grain (14) for detailing work. Approximately 7¼" long with a 2¾" blade, these are well suited for making models or musical instruments and shaping keyholes or pierced carvings - anywhere a larger tool would be awkward or too aggressive. Stickmakers love using these for detailing work on their sticks.
from £42.00 inc VAT
Auriou Rat Tail (Tapered Round) Rasps
Auriou Rat Tail (Tapered Round) Rasps
Stitched to the tip! Tapered round rasp. Great for shaping round mortises or for creating a spiral on a goblet stem. Use with twist action to utilise all the teeth. We have a limited number of unhandled rasps at a reduced price, please see list below.
from £62.40 inc VAT

Auriou Riffler Rasp - Half Round / Triangular
Auriou Riffler Rasp - Half Round / Triangular
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £58.80 inc VAT
Auriou Riffler Rasp - Knife / Spoon
Auriou Riffler Rasp - Knife / Spoon
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £58.80 inc VAT

Auriou Riffler Rasp - Rat Tail / Oval
Auriou Riffler Rasp - Rat Tail / Oval
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £58.80 inc VAT
Auriou Riffler Rasp - Rhombus / Brush
Auriou Riffler Rasp - Rhombus / Brush
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £58.80 inc VAT

Auriou Riffler Rasp - Thumb / Laurel
Auriou Riffler Rasp - Thumb / Laurel
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £58.80 inc VAT
Auriou Riffler Rasp - V Shape / Rectangle
Auriou Riffler Rasp - V Shape / Rectangle
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £58.80 inc VAT

Auriou Rotary RaspsAuriou Rotary Rasps
Auriou Rotary Rasps
These hand cut rotary rasps are very popular in Germany & Austria (not sure why really) Like it's big brother above this rotary rasp will cut (not burn) your wood quite precisely. It works well on the Arbortech long angled grinder. Small rotary rasp for Arbortech type grinders. Rounded edge grain 7 (medium).
from £82.60 inc VAT
Auriou Roughing Rasp
Auriou Roughing Rasp
This is the 'hog' that reduces your band saw blank to more closely resemble to the shape you want (think cabriole leg, guitar neck, gun stock, decoy duck blanks etc) Flat and half round tapered section, grain 3. the rasp (excluding the handle) is 12" (300mm) long. Available in left or right handed models. The address position for holding your rasp is slightly skewed across the grain (just...
£105.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last