Benchcrafted Moxon Vice
Back In Stock
Benchcrafted Moxon Vice
The Benchcrafted Moxon Vice clamps to any bench, raising your workpiece to a convenient height and holding it rock-solid. If you cut dovetails and other joints by hand, this is a vise that will completely change your experience in the shop. Fast and effortless, the Moxon vice makes joinery a pleasure. The Moxon vice is fitted with cast iron hand wheels for rapid, easy adjustment. Instead of the handwheel...
£198.00 inc VAT
Veritas Tail Vice Screw
Veritas Tail Vice Screw
The tail vice screw is essentially the same construction as a shoulder vice screw but without an end guide, this tail vice screw has a clamping capacity of 17" less thickness of wooden jaws (not included) and is 21" overall. 1.1/8" diameter screw with single-lead Acme threads. Mounting screws included. Wooden Handle not included, but can be purchased as an optional extra. Made...
£53.65 inc VAT

Edge Toolworks Moxon ViceEdge Toolworks Moxon Vice
Edge Toolworks Moxon Vice
A beautifully made, ready to go straight from the box (no assembly required) Moxon Vice. Made by Matthew Collins Furniture under their brand of 'Edge Toolworks'. Matt runs a successful workshop in Standlake, Oxfordshire which he set up in 1990, and has been a customer of Classic Hand Tools for as long as we can remember! Matt's team use these vices in their workshop and have done so...
£295.00 inc VAT
Veritas Front Vice - Regular
Veritas Front Vice - Regular
This vise has rugged, machined, double guide rods and a single-lead Acme screw. The regular front vise is 7" × 14¾" overall with a 7/8" dia. screw and clamping capacity of 8¼" (less the thickness of your wooden jaws). Can be added to an existing bench or built into a new one. Mounting screws included. Made in Canada. Patented.
£89.00 inc VAT

Veritas Front Vice - Large
Veritas Front Vice - Large
This vise has rugged, machined, double guide rods and a single-lead Acme screw. The large front vise is 10-1/2" × 21" overall with a 1-1/8" dia. screw, and 13" clamping capacity (less the thickness of your wooden jaws). The larger vise has an offset center screw to allow vertical clamping without skewing. Can be added to an existing bench or built into a new one. Mounting screws included. Made...
£134.00 inc VAT
Veritas Twin-Screw Vice
Veritas Twin-Screw Vice
The Veritas Twin Screw Vice is the only non-racking full-width end vise on the market. You can clamp anything anywhere in the vise and the jaws stay parallel. The chain drive ensures parallelism and eliminates the racking common in other vises. It can be operated using either handle. Even better, a spring-loaded lock pin lets you disengage the chain for controlled jaw skewing needed to equalize...
from £298.00 inc VAT

Veritas Wood Carver's ViceVeritas Wood Carver's Vice
Veritas Wood Carver's Vice
A good carver's vice should be adjustable in all three axis. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance so that your work does not suddenly fall or rotate. You can reposition the work and...
£163.00 inc VAT
Accessories for the Veritas Wood Carver's ViceAccessories for the Veritas Wood Carver's Vice
Accessories for the Veritas Wood Carver's Vice
Accessories for the Veritas Wood Carver's Vice: Dog Hole Mount Assembly: The vice can be side or top mounted through any standard 3/4" dia. dog hole using the auxiliary rod/sleeve/wing-nut assembly, usable on benches from 5/8" to 4" thick. 3 1/2" Mounting Plate: 3-1/2" dia. by 1/2" thick mounting plate with a steel rod. 2" Mounting Plate: For mounting smaller pieces, such as duck heads or bird...
from £9.50 inc VAT

Benchcrafted Classic Leg Vice Base HardwareBenchcrafted Classic Leg Vice Base Hardware
Benchcrafted Classic Leg Vice Base Hardware
In the 19th and early 20th century, many vocational schools and commercial shops in France and its colonies were outfitted with Roubo-style benches and metal leg vice hardware. French hardware is typically made entirely of metal, whereas hardware from Britain and America usually features a T-shaped iron casting fitted with a sliding wooden handle. Benchcrafted designed theirs around the French model...
£264.00 inc VAT
Benchcrafted Glide Leg Vice Base Hardware - CastBenchcrafted Glide Leg Vice Base Hardware - Cast
Back In Stock
Benchcrafted Glide Leg Vice Base Hardware - Cast
The Glide makes holding your work quick, easy, and pleasurable. It uses a clever combination of components to deliver incredible clamping force with minimal effort. Traditional leg vices use a sliding "tommy bar" to operate the vice. This style of handle offers one distinct advantage: lots of leverage. These guys have engineered the Glide to deliver rock-solid workholding without the need...
£334.00 inc VAT

Benchcrafted Glide Leg Vice Base Hardware - MachinedBenchcrafted Glide Leg Vice Base Hardware - Machined
Benchcrafted Glide Leg Vice Base Hardware - Machined
The Glide makes holding your work quick, easy, and pleasurable. It uses a clever combination of components to deliver incredible clamping force with minimal effort. Traditional leg vices use a sliding "tommy bar" to operate the vice. This style of handle offers one distinct advantage: lots of leverage. These guys have engineered the Glide to deliver rock-solid workholding without the need...
£420.00 inc VAT
Benchcrafted Crisscross Retro
Back In Stock
Benchcrafted Crisscross Retro
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
£195.00 inc VAT

Benchcrafted Crisscross Solo
Benchcrafted Crisscross Solo
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
£152.00 inc VAT
Benchcrafted Crisscross 14
Benchcrafted Crisscross 14
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
£99.00 inc VAT

Benchcrafted HiVise + Mounting ScrewBenchcrafted HiVise + Mounting Screw
Benchcrafted HiVise + Mounting Screw
Taking cues from early French prototypes (commonly referred to as an "etau(x)" which is simply the French word for vice) Benchcrafted have gone a few steps further and made improvements and refinements over the historical versions. The body of the vice is designed to be much stronger, yet more compact with its inset arms and single clamping screw for attaching the vise to a workbench or table. The...
£305.00 inc VAT
Benchcrafted HiVise Mounting ScrewBenchcrafted HiVise Mounting Screw
Benchcrafted HiVise Mounting Screw
The mounting screw is designed for the HiVise to make it ultimately more portable. The HiVise can be made with either a tail vice cleat or a benchtop batten, but having a mounting screw will allow you to use it in multiple positions around your bench, or anywhere outside the workshop where you are allowed to make a mess! Anticipating the varied needs of woodworkers Benchcrafted designed the HiVise...
£71.00 inc VAT

Benchcrafted Classic Tail Vice (Wagon Vice) Kit
Benchcrafted Classic Tail Vice (Wagon Vice) Kit
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz. The Benchcrafted Tail Vice uses a pair of either wooden or metal...
£355.00 inc VAT
Benchcrafted Tail Vice (Wagon Vice) Kit - CastBenchcrafted Tail Vice (Wagon Vice) Kit - Cast
Benchcrafted Tail Vice (Wagon Vice) Kit - Cast
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz. The Benchcrafted Tail Vice uses a pair of either wooden or metal...
£372.00 inc VAT

Benchcrafted Tail Vice (Wagon Vice) Kit - MachinedBenchcrafted Tail Vice (Wagon Vice) Kit - Machined
Back In Stock
Benchcrafted Tail Vice (Wagon Vice) Kit - Machined
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz. The Benchcrafted tail vice uses a pair of either wooden or metal...
£458.00 inc VAT
Benchcrafted HiViseBenchcrafted HiVise
Back In Stock
Benchcrafted HiVise
Taking cues from early French prototypes (commonly referred to as an "etau(x)" which is simply the French word for vice) Benchcrafted have gone a few steps further and made improvements and refinements over the historical versions. The body of the vice is designed to be much stronger, yet more compact with its inset arms and single clamping screw for attaching the vise to a workbench or table. The...
£225.00 inc VAT

Veritas Shoulder-Vice ScrewVeritas Shoulder-Vice Screw
Veritas Shoulder-Vice Screw
This vice screw is for the L-shaped shoulder vise used on Scandinavian-style benches. 1-1/8" dia. screw with single-lead Acme threads. The threaded guide is mortised into the vise shoulder, while the end guide attaches to the vise jaw. 7-1/4" clamping capacity (less wooden shoulder thickness), 13" overall. Mounting screws included. Made in Canada. Patented.
£42.55 inc VAT
Veritas Tail ViceVeritas Tail Vice
Veritas Tail Vice
This vise can be used for both types of tail vise - with or without a shoulder. It has guide plates 2" wide by 15" long. The maximum opening is 8" (less the thickness of your wooden jaws). The single-lead Acme screw is 7/8" in diameter. Made in Canada. Patented.
£87.95 inc VAT

Veritas Quick-Release Front ViceVeritas Quick-Release Front Vice
Veritas Quick-Release Front Vice
Using the same quick-release mechanism as our tail vise, our front vise has a simple on-off cam lever to engage or disengage the Acme-threaded screw, allowing it to apply up to 400lb of force in either clamping or spreading applications. The screw mechanism provides 12¼" of overall travel (less the thickness of your wooden jaw and bench apron). Tight body tolerances result in minimal jaw sag,...
£430.00 inc VAT
Veritas Quick-Release Sliding Tail ViceVeritas Quick-Release Sliding Tail Vice
Veritas Quick-Release Sliding Tail Vice
Installing a tail vise is notoriously difficult, usually requiring a section of workbench to be cut away and rebuilt around a complicated vise mechanism. Not so with this one. It can be quickly incorporated into a new bench construction or easily retrofitted to an existing bench without major surgery. The end plates are symmetrical, so you can install the T-handle and quick-release lever in a...
£420.00 inc VAT

Veritas Vice Handle
Veritas Vice Handle
A wooden handle from Veritas that fits both their Tail Vice Screw and their Front Vices. Handle length 310mm and diameter of 30mm
£9.68 inc VAT