The Robert Sorby ProEdge Ultimate Sharpening SystemThe Robert Sorby ProEdge Ultimate Sharpening System
Coming Soon
The Robert Sorby ProEdge Ultimate Sharpening System
The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated! Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...
£399.00 inc VAT
Tormek Centering Knife JigTormek Centering Knife Jig
Tormek Centering Knife Jig
With Tormek's patented KJ-45 Centreing Knife Jig, you'll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thicker, tapered hunting knife, you'll get the same results on both bevels of the knife without needing to reset the jig. The KJ-45 Centreing Knife...

5

£45.00 inc VAT

Tormek Knife Angle SetterTormek Knife Angle Setter
New
Tormek Knife Angle Setter
Why KS-123 Knife Angle Setter? Set the exact sharpening angle for any type of knife. Easy to use - set the angle in three easy steps. Sets an exact sharpening angle even for tapered blades. Self-adjusting for the diameter of the grinding wheel. Compatible with all Tormek knife jigs. Works with the Tormek T-8, Tormek T-4 and older models. What's Your Angle? Our angle is always...
£39.95 inc VAT
Tormek Multi BaseTormek Multi Base
New
Tormek Multi Base
The new MB-102 Multi Base allows you to sharpen on the side of the grinding wheel but, with the addition of the extra mount, the universal support can be positioned vertically on the front of the machine. The Vertical position provides better sharpening access for knife edge trailing (with the edge in the same direction as the rotation of the grinding wheel) and for guided honing using knife jigs The...
£89.75 inc VAT

Tormek T-8 Original Sharpening System with Hand Tool and Woodturner's KitsTormek T-8 Original Sharpening System with Hand Tool and Woodturner's Kits
Special Offer
Tormek T-8 Original Sharpening System with Hand Tool and Woodturner's Kits
Package deal contains the Tormek T-8 Sharpening System with both the HTK-806 Hand Tool Kit and TNT-808 Woodturner's Accessory Kit.
£1,130.00 inc VAT
Tormek T-8 Original Sharpening System with Hand Tool KitTormek T-8 Original Sharpening System with Hand Tool Kit
Special Offer
Tormek T-8 Original Sharpening System with Hand Tool Kit
Package deal contains the Tormek T-8 Sharpening System and Tormek HTK-806 Hand Tool Kit.
£845.00 inc VAT

Tormek T-8 Original Sharpening System with Woodturner's KitTormek T-8 Original Sharpening System with Woodturner's Kit
Special Offer
Tormek T-8 Original Sharpening System with Woodturner's Kit
Package deal contains the Tormek T-8 Sharpening System and the Tormek TNT-808 Woodturner's Accessory Kit.
£945.00 inc VAT
Tormek Wide Centering Knife JigTormek Wide Centering Knife Jig
Tormek Wide Centering Knife Jig
This well balanced, patented jig provides extra stability when sharpening knives with long, flexible blades such as fillet knives. With the KJ-140 Wide Centering Knife Jig, you achieve a symmetrical grind with the same angle on both sides of the blade. Regardless of the thickness and geometry of the blade, it will self centre in the jig, giving you the same result on both bevels. The longer clamp stabilises...
£57.50 inc VAT

Tormek T-8 Sharpening SystemTormek T-8 Sharpening System
Tormek T-8 Sharpening System
The Tormek T-8 sharpening machine maximises the precision with its revolutionary fully cast housing. This new design, together with a number of elaborated details, gives you the best conditions possible for a successful sharpening with top results. The advanced design ensures an unbeatable precision for the Universal Support, which is the foundation of the Tormek sharpening system, since it controls...
£740.00 inc VAT
Tormek T-8 CustomTormek T-8 Custom
Tormek T-8 Custom
Customise your own water cooled sharpening system with a Tormek T-8 Custom. This package enables you to create your own Tormek sharpening system, with your favourite accessories. Just add grinding wheels, honing wheels, the right jigs and your own creativity. * Create your own sharpening system. * Grinding wheel and honing wheel not included. * Sharpen all your edge tools. * Water cooled sharpening...
£420.00 inc VAT

Tormek T-4 Sharpening SystemTormek T-4 Sharpening System
Tormek T-4 Sharpening System
Tormek T4 is an enhancement of the T-3 model taking the precision and stability to a completely new level. Vital functions like the motor and the main shaft are mounted in the zinc cast top which includes the integrated sleeves for the Universal Support. This advanced design ensures an unbeatable precision for the Universal Support, which is the foundation of the Tormek jig system. You get a high...
£419.00 inc VAT
Robert Sorby Buffing Mop
Robert Sorby Buffing Mop
Buffing Mop to fit the ProEdge Sharpening Machine. Also part of the Buffing Kit (PEBUFFKIT)
£25.00 inc VAT

Robert Sorby Cutter Holder
Robert Sorby Cutter Holder
The Robert Sorby Cutter Holder is a handy little accessory which will accept most of the Robert Sorby cutters. It avoids skinning fingers when sharpening. Tip not included.
£11.00 inc VAT
Robert Sorby Fingernail Profiling Kit
Robert Sorby Fingernail Profiling Kit
The fingernail profiling kit is ideal for shaping those perfect fingernail sweeps on bowl and spindle gouges. This set contains the arm and the boss but both items are available individually.
£84.95 inc VAT

Robert Sorby Honing Paste
Robert Sorby Honing Paste
Applied to a buffing mop the honing paste creates a highly polished finish on any steel.
£10.00 inc VAT
Robert Sorby Honing Wheel
Robert Sorby Honing Wheel
Honing wheel to fit the ProEdge Sharpening Machine. Also part of the Honing Kit (WPEPHONEKIT)
£38.00 inc VAT

Robert Sorby Honing Wheel Arbor
Robert Sorby Honing Wheel Arbor
Honing wheel arbor to fit the ProEdge Sharpening Machine. Also part of the Honing Kit (WPEPHONEKIT)
£19.00 inc VAT
Robert Sorby Honing Wheel Kit
Robert Sorby Honing Wheel Kit
This kit uses the abrasive honing wheel which can be shaped to allow for honing of gouge flutes - especially useful for woodcarving tools. Items also available individually.
£51.00 inc VAT

Robert Sorby Pigtail Mandrel
Robert Sorby Pigtail Mandrel
The Pigtail Mandrel to fit the ProEdge Sharpening Machine. Also part of the Buffing Kit (PEBUFFKIT)
£19.00 inc VAT
Robert Sorby ProEdge Aluminium Oxide Belts
Robert Sorby ProEdge Aluminium Oxide Belts
This common abrasive is designed primarily to sharpen carbon steel bench chisels, carving tools and plane irons but will also hone harder high speed steel tools. The material longevity is at the lower end of the abrasives scale they use on their belts, but makes an excellent economical choice. Work your way through grit sizes (heavier grits for the removal of more material) to achieve a fine finish...

5

£4.95 inc VAT

Robert Sorby ProEdge Buffing Kit
Robert Sorby ProEdge Buffing Kit
The Robert Sorby ProEdge Buffing Kit includes: Robert Sorby ProEdge Pigtail Mandrel Robert Sorby ProEdge Buffing Wheel Robert Sorby ProEdge Ultra-Fine Buffing Compound
£50.00 inc VAT
Robert Sorby ProEdge Ceramic Belts
Robert Sorby ProEdge Ceramic Belts
This hardwearing material is a great choice for profiling and re-profiling damaged tools. The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical.
£7.25 inc VAT

Robert Sorby ProEdge Knife Holder Large
Robert Sorby ProEdge Knife Holder Large
For hunting knives and those with blades over 8". Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
£39.00 inc VAT
Robert Sorby ProEdge Knife Holder Small
Robert Sorby ProEdge Knife Holder Small
The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long. Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
£39.00 inc VAT

Robert Sorby ProEdge Knife Jig Large
Robert Sorby ProEdge Knife Jig Large
This larger knife holder is ideal for hunting knives and knives over 8" long. Both jigs can be adjusted using the collar on the arm to allow for steep and shallow sharpening bevels. Note - The holders can be used with either the large or small jig, you do not need to buy both jigs.
£99.00 inc VAT
Robert Sorby ProEdge Knife Jig Small
Robert Sorby ProEdge Knife Jig Small
The knife jig consists of a back plate, raised wear plate, universal arm and knife holder. The kit comes with a set of full instructions. The small knife holder is ideal for pocket knives, carving knives and blades up to 8" long. Note - The holders can be used with either the large or small jig, you do not need to buy both jigs.
£99.00 inc VAT

Robert Sorby ProEdge Long Grind Jig
Robert Sorby ProEdge Long Grind Jig
Helps you to create three different fingernail profiles.
£16.00 inc VAT
Robert Sorby ProEdge Proset
Robert Sorby ProEdge Proset
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset. By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.
£19.00 inc VAT

Robert Sorby ProEdge Skew Jig
Robert Sorby ProEdge Skew Jig
The Skew Jig allows the turner to accurately and safely sharpen his skew chisels.
£19.00 inc VAT
Robert Sorby ProEdge Trizact Belts
Robert Sorby ProEdge Trizact Belts
Perhaps the most popular in the range of belts. This robust material is designed to handle the demands of all steels. Not strictly 'grit sizes' these belts are built using brick and pyramid abrasive shaping. The highest 3000 'grit' size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
£14.00 inc VAT

Robert Sorby ProEdge Zirconium Belts
Robert Sorby ProEdge Zirconium Belts
Designed for HSS tools, drill and router bits this material provides good value. The 60 grit belt will tackle the most damaged surface. Use the 120 grit to provide a rewarding cutting edge and finish.
£4.50 inc VAT
Robert Sorby Short Tool Platform with Arm
Robert Sorby Short Tool Platform with Arm
Increases access when tools are getting old and worn.
£28.00 inc VAT

Robert Sorby Standard Gouge Jig
Robert Sorby Standard Gouge Jig
Allows easy sharpening of all standard ground woodworking gouges.
£31.95 inc VAT
Robert Sorby Woodworkers' Square Guide
Robert Sorby Woodworkers' Square Guide
This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). This jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform. Ideal for sharpening chisels and plane irons.
£26.50 inc VAT

Robert Sorby Woodworking Chisel Jig
Robert Sorby Woodworking Chisel Jig
Accurately ensures a straight cutting edge on any woodworking chisel.
£19.00 inc VAT
Tormek Adjustable Tool RestTormek Adjustable Tool Rest
Tormek Adjustable Tool Rest
With the Tormek Adjustable Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools. It has a generous surface, 90 × 110mm, which permits a safe and steady positioning of the tool towards the stone. The...
£33.00 inc VAT

Tormek AngleMasterTormek AngleMaster
Tormek AngleMaster
The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool. The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone diameter from 250 mm or 10" down to 150 mm or 6", so you can achieve an exact setting even as the stone wears.
£24.75 inc VAT
Tormek Anti-Corrosion Concentrate (2 Pack)
Tormek Anti-Corrosion Concentrate (2 Pack)
The Tormek Anti-Corrosion Concentrate makes water non-corrosive. Always use with Tormek diamond wheels. It can also be used with grindstones. Add 10ml concentrate to 250ml water (~4%). Scale for correct dilution. Mix Anti-Corrosion Concentrate and water before adding to water trough. If you want to save the mix overnight, remember to lower the water trough. Does not contain anti-freeze. Each...
£38.50 inc VAT

Tormek AWT-250 Advanced Water TroughTormek AWT-250 Advanced Water Trough
Tormek AWT-250 Advanced Water Trough
The Tormek Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools. Magnet Cleans the Stone The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone...
£29.00 inc VAT
Tormek Axe JigTormek Axe Jig
Tormek Axe Jig
With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.
£16.85 inc VAT

Tormek Bench Grinder Kit
Tormek Bench Grinder Kit
A package deal comprising the Tormek BGM-100, Tormek SVS-50 Multi-Jig, Tormek TTS-100 Turning Tool Setter and the Tormek SVD-186 Turning Tool Jig. Tormek BGM-100 With the BGM-100 you can use Tormek jigs and setting devices on your bench grinder, giving you perfect control. The chosen shape and edge angle are precisely repeatable. The BGM-100 also allows the use of other Tormek woodturner's...
£235.00 inc VAT
Tormek Bench Grinder Mounting SetTormek Bench Grinder Mounting Set
Tormek Bench Grinder Mounting Set
If you need to remove a lot of steel to create a desired shape on a new tool, this Tormek Bench Grinder Mounting Set BGM-100 enables you to use the Tormek woodturning jigs also on your bench grinder. Take control of your profiles No matter which grinding machine you use, the most difficult part in sharpening woodturning tools is to exactly replicate the shape and the edge angle. With the BGM-100...
£87.75 inc VAT

Tormek CW-220 Composite Honing Wheel
Tormek CW-220 Composite Honing Wheel
The Tormek Composite Honing Wheel has integrated polish to remove the burr and is easy to use. This wheel fits Tormek T-8, Tormek T-7 and Tormek 2000. The Composite Honing Wheel is suitable to use in clean environments since there's no need to add honing compound. Tip when honing Moisten the composite honing wheel with some water for smoother honing. Use a sponge or cloth.
£84.50 inc VAT
Tormek DC-200 Diamond Wheel Coarse 360G
Tormek DC-200 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft. Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate in the water when sharpening...
£210.00 inc VAT

Tormek DC-250 Diamond Wheel Coarse 360G
Tormek DC-250 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter. Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate...
£273.00 inc VAT
Tormek DE-200 Diamond Wheel Extra Fine 1200G
Tormek DE-200 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft. Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
£198.00 inc VAT

Tormek DE-250 Diamond Wheel Extra Fine 1200G
Tormek DE-250 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter. Included with every diamond wheel is a bottle of Tormek...
£256.00 inc VAT
Tormek DF-200 Diamond Wheel Fine 600G
Tormek DF-200 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft. Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
£195.00 inc VAT
Page: 1 | 2 |