Famag Bormax 2.0 Imperial Forstner Bit
New
Famag Bormax 2.0 Imperial Forstner Bit
Hexagonal shank for a better power transfer. Suitable for use in a drill press or freehand. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Low heat development offers an incredibly long service life with highest drilling quality. Alloyed tool steel. 900 - 3200 rpm. Overall height from tip to tip 90mm (57mm working depth).
from £24.65 inc VAT
Famag Bormax 2.0 Metric Forstner Bit
New
Famag Bormax 2.0 Metric Forstner Bit
Hexagonal shank for a better power transfer. Suitable for use in a drill press or freehand. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Low heat development offers an incredibly long service life with highest drilling quality. Alloyed tool steel. 900 - 3200 rpm. Overall height from tip to tip 90mm (57mm working depth).
from £22.19 inc VAT

Famag Bormax 2.0 Metric Forstner Bit 5pcs Set
New
Famag Bormax 2.0 Metric Forstner Bit 5pcs Set
FAMAG 5pcs Bormax 2.0 Forstner Bit set in wooden case Ø 15, 20, 25, 30, 35 mm. Alloyed tool steel, RPM- 900 - 3200 rpm. Overall height from tip to tip 90mm (57mm working depth).
£99.00 inc VAT
Famag Bormax 2.0 Metric Forstner Bit 6pcs Set
Famag Bormax 2.0 Metric Forstner Bit 6pcs Set
FAMAG 6pcs Bormax 2.0 Forstner Bit set in wooden case Ø 12, 13, 16, 18, 20, 22 mm. Alloyed tool steel, RPM- 900 - 3200 rpm. Overall height from tip to tip 90mm (57mm working depth).
£110.79 inc VAT

Famag Extension ShanksFamag Extension Shanks
New
Famag Extension Shanks
Perfect for drilling deep holes. The Ø 8mm shanks are suitable for FAMAG forsner bits up to 22mm (7/8"). The Ø 10mm shanks are suitable for FAMAG forsner bits 22mm (7/8") and larger. The Forstner bits we stock are 90mm tall from tip to tip, which gives you a working depth of 57mm. Four attachment screws for fixing. 13mm shank has three clamping surfaces. Suitable...
from £25.30 inc VAT
Lee Valley 3/4" Dog Hole BushingsLee Valley 3/4" Dog Hole Bushings
New
Lee Valley 3/4" Dog Hole Bushings
These 3/4" hardened steel bushings help you make an accurate dog-hole drilling guide using any 1 1/2" thick board. Knurling on the bushing provides a mechanical lock when installed in an appropriately-sized hole (1" for the 3/4" bushing), and a projecting rim ensures that it rests perpendicular to the jig's surface. Made in Canada.
£10.00 inc VAT

Lee Valley Drilling Jig with Metric BushingsLee Valley Drilling Jig with Metric Bushings
New
Lee Valley Drilling Jig with Metric Bushings
This Lee Valley product is based on a suggestion from cabinetmaker Stephen Shepherd for a jig that could drill chair spindles, this centreing jig has a large bearing surface for accuracy, with sighting marks for easy visual alignment. Used for end drilling round stock 5/16" to 1 1/2" in diameter, it also permits drilling of spheres and has a V notch for drilling into the side of a cylinder...
£15.00 inc VAT
Mappa Tools ScrewdriverMappa Tools Screwdriver
New
Mappa Tools Screwdriver
The Mappa Tools Screwdriver with a resin impregnated handle. The resin infusing process makes the handles stable and strong, but it also gives you a beautiful long lasting finish. Available with a Curly Maple or African Blackwood handle. Robust firm grip. Equipped with a Wera bit holder. Length wooden part: 103 mm. Total length: 137 mm. Thickness: 34mm.
£69.50 inc VAT

Veritas Small Tapered ReamerVeritas Small Tapered Reamer
Veritas Small Tapered Reamer
The Veritas small tapered reamer 5mm to 19mm (3/16" to 3/4") is useful to rustic furniture makers for back-tapering holes for through-tenon wedging. The bit is 85mm overall length with an 8mm hex shank. Designed for use in an electric drill, these tools may also be used in a traditional brace.
£17.30 inc VAT
Veritas Large Tapered Reamer
Veritas Large Tapered Reamer
The Veritas large tapered reamer 5mm to 30mm (3/16" to 1-3/16") is useful to rustic furniture makers for back-tapering holes for through-tenon wedging. The bit is 140mm overall length with an 8mm hex shank. Designed for use in an electric drill, this tool may also be used in a traditional brace. The Veritas small tapered reamer 5mm to 19mm (3/16" to 3/4") is useful to rustic furniture makers for...
£25.60 inc VAT

Veritas Tapered Reamer ProVeritas Tapered Reamer Pro
Veritas Tapered Reamer Pro
The Veritas Tapered Reamer Pro is designed for use in a hand brace, our pro reamer offers excellent control and good cutting capability for general woodworking. It is particularly useful for tapering through holes where you want to be able to wedge tenons, such as in chair construction. This reamer has a cast steel alloy body, a separate spring-steel blade, and a pair of blade-adjusting set screws....
£59.50 inc VAT
Veritas Power Tenon CuttersVeritas Power Tenon Cutters
Veritas Power Tenon Cutters
Veritas Power Tenon Cutters as recommended to us by Jon Warnes. Jon has taught rustic woodcraft for many years so his recommendation is most valuable. This what the manufacturers say... These tools are indispensable for making rustic furniture, producing clean round tenons with smoothly radiused shoulders on the ends of sticks, branches, or more formal stock if you wish. With typical Veritas...
from £89.40 inc VAT

Grobet Auger Bit File
Grobet Auger Bit File
Auger bit files are double ended, with one end having teeth cut along the face with uncut edges, and the other with teeth cut along the edge and uncut faces. This version, made by Grobet in Italy is very nicely made, with each end of the file tapered in two dimensions, and a finely shaped centre section to grip when working. Length 7'' - Steel (8oz) Made in Italy by Grobet
£29.00 inc VAT
Lie-Nielsen Countersink
Back In Stock
Lie-Nielsen Countersink
Curly Maple handle with solid brass ferrule. 3 flute, 82° countersink. Please note that wood handles have natural figure and colour variations in the wood grain and may not match the photo.
£80.00 inc VAT

Lie-Nielsen ScrewdriversLie-Nielsen Screwdrivers
Back In Stock
Lie-Nielsen Screwdrivers
These Lie-Nielsen screwdrivers are made to fit specific screws on Lie Nielsen tools. They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, they are correctly sized to fit the screw slots, giving you good power and control without slipping. The Chipbreaker and frog adjustment screwdriver are particularly useful. The blades are hardened 416 Stainless...
£60.00 inc VAT
Rob Cosman Wood Hinge Drill Kit - ImperialRob Cosman Wood Hinge Drill Kit - Imperial
Rob Cosman Wood Hinge Drill Kit - Imperial
Rob Cosman's Wood Hinge Drill Kit as seen on "The Woodhinge Box" Rob made thousands of boxes using this style of hinge and I have designed four jigs to precisely drill the hole in the center of dowel segments (the most difficult task). Kit allows you to drill 1/16 inch and 1/8 inch size holes in 1/4 inch, 1/2 inch, 3/8 inch, and 3/4 inch diameter dowels. Kit includes 1/16 inch...
£148.00 inc VAT

Rob Cosman Wood Hinge Drill Kit - MetricRob Cosman Wood Hinge Drill Kit - Metric
Rob Cosman Wood Hinge Drill Kit - Metric
Rob Cosman's Wood Hinge Drill Kit as seen on "The Woodhinge Box". Rob made thousands of boxes using this style of hinge and I have designed four jigs to precisely drill the hole in the center of dowel segments (the most difficult task). Kit allows you to drill 1/16 and 1/8 inch size holes in 6mm, 8mm, 10mm, and 12mm dowels. Kit includes 1/16 and 1/8 inch drill holders; 6mm,...
£122.00 inc VAT
Tormek Drill Bit Sharpener
Tormek Drill Bit Sharpener
With the Tormek Drill Bits Sharpening Attachment you can now sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape.
£230.00 inc VAT

Veritas Plane ScrewdriverVeritas Plane Screwdriver
Veritas Plane Screwdriver
A regular screwdriver just doesn't work well on cap iron screws. A narrow blade can mar the cap-screw slot, and there's always the risk that the screwdriver tip will slip out of the slot altogether. Veritas have designed this screwdriver to make it both safe and easy to remove, replace or adjust cap irons. It has a turned brass collar surrounding the tip to capture the head of a cap iron screw...
£32.50 inc VAT
Veritas Tapered Snug Plug CuttersVeritas Tapered Snug Plug Cutters
Veritas Tapered Snug Plug Cutters
Sometimes when plugging holes, no matter how carefully drilled, the holes finish up slightly oversize for the plug, especially in soft woods. These Veritas cabinet maker's snug plug cutters overcome this by cutting a slightly tapered plug. The first 3mm of the plug is the diameter stated whilst the remaining length is then flared out at an angle of 3°. Just tap the plug into place until you...
from £15.90 inc VAT

Replacement Blade for Veritas Power Tenon Cutters
Replacement Blade for Veritas Power Tenon Cutters
This replacement blade is for Veritas Power Tenon Cutters and it fits all sizes.
£18.85 inc VAT
Veritas Power Tenon Cutter Sharpening Kit
Veritas Power Tenon Cutter Sharpening Kit
Each Veritas Power Tenon Cutter sharpening kit consists of: 1½" x 1½" Sanding Drum. Pack of 3 x 80 grit Silicon Carbide Sleeves Pack of 3 x 120 grit Silicon Carbide Sleeves
£19.50 inc VAT