Robert Sorby Gilt Edge Chisels - Rosewood
Robert Sorby Gilt Edge Chisels - Rosewood
Gilt Edge chisel with rosewood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
from £41.99 inc VAT
Robert Sorby Traditional Bevel Edged Chisel
Robert Sorby Traditional Bevel Edged Chisel
Traditional "carver" style boxwood handle with brass ferule and leather washer. Overall Size 265 - 340mm Blade Length 127-178mm
from £32.69 inc VAT

Robert Sorby Octagonal Handled Bevel Edged Chisel
Robert Sorby Octagonal Handled Bevel Edged Chisel
Octagonal boxwood handle with brass ferule and leather washer. Overall Size 265 - 340mm Blade Length 127 - 178mm
from £39.79 inc VAT
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
from £40.62 inc VAT

Robert Sorby Thin Bladed Paring Chisel
Robert Sorby Thin Bladed Paring Chisel
Robert Sorby thin bladed paring chisels are traditionally used by pattern makers and now a favourite with cabinet makers, carpenters and joiners. Used for accurate hand paring and fitting without the use of a mallet. Overall Size:- 380-407mm Blade Length 248mm
from £53.78 inc VAT
Robert Sorby Sash Mortice Chisel
Robert Sorby Sash Mortice Chisel
Used for light mortising work, boxwood handle. A 2 degree taper prevents binding in the cut. Ideal for clearing out waste from mortices for tenons, locks and hinges. Can be used with a mallet. Overall Size:- 279mm Blade Length 159mm
from £48.74 inc VAT

Robert Sorby Double Hooped Registered Chisel
Robert Sorby Double Hooped Registered Chisel
Originally it was thought that registered (or shipwrights chisels) were used by barge builders and they first appeared in the mid 19th century. “strong ship” or registered chisels were also described in the Scottish tool manufacturer Mathieson’s catalogue of 1900. More recently these chisels have become very popular with joiners and timber framers for mortising. The double hoops give...
from £37.07 inc VAT
Robert Sorby Framing Chisel
Robert Sorby Framing Chisel
The Robert Sorby Framing Chisel is the same principle as their registered chisel but with a longer blade and handle for deeper morticing work. Overall Size:- 495mm Blade Length:- 267mm
from £63.90 inc VAT

Robert Sorby Bevel Edged Framing Chisel
Robert Sorby Bevel Edged Framing Chisel
Very similar to the RS285 framing chisel that the blade is beveled to give extra clearance in the cut. Tapered along the length. Ash handle. Shorter than the RS285 - 388mm overall length.
from £84.15 inc VAT
Robert Sorby Heavy Duty Corner Chisel
Robert Sorby Heavy Duty Corner Chisel
A heavyweight 1" (25mm) wide bruzz (corner chisel) for cleaning up deep corners of mortises. Ash Handle Overall Size:- 380-407mm Blade Length 239mm
£142.80 inc VAT

Robert Sorby Timber Framer's Slick
Robert Sorby Timber Framer's Slick
This heavy duty timber framers and boat builders slick from Robert Sorby has an offset blade to allow for clearance when working in deep sockets and mortises. It can also be used as a massive paring chisel. Choice of two widths - 2-3/8" (60mm) & 3-3/8" (85mm). Solid one piece forged blade including the heavy tang which is set deep into the handle. A heavy duty socket is fitted between...
from £134.73 inc VAT
Holster for Robert Sorby Timber Framer's Slick
Holster for Robert Sorby Timber Framer's Slick
A quality riveted leather holster for safer carriage of the Robert Sorby Timber Framer's Slick.
from £48.73 inc VAT

Robert Sorby Corner Chisel
Robert Sorby Corner Chisel
Designed for squaring up the ends of mortises, grooves or housings. The faces are precision ground to produce clean, accurate 90 degree angles. Often used nowadays to clean up after a router. Sharpen each face individually with an oil stone. The origins of this tool are from wheelwrights and millwrights who used a v shaped chisel to hollow out mortises in wheels and wooden beams (often referred...
£73.17 inc VAT
Robert Sorby Leather Edge GuardsRobert Sorby Leather Edge Guards
Robert Sorby Leather Edge Guards
We highly recommend edge guards to protect yourself and your tools. The chisel guards are available in 1", 1½" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels. The slick guards are available in 60mm and 85mm sizes suitable for the 289 framer's slicks.
from £7.20 inc VAT

Robert Sorby DrawknifeRobert Sorby Drawknife
Robert Sorby Drawknife
10" cutting edge, ash handled draw knife. Straight back and straight blade with slightly splayed handles.
£90.96 inc VAT
Robert Sorby Framing Chisel Set
Robert Sorby Framing Chisel Set
On of each of the ever popular RS285 Robert Sorby Framing Chisel in 1'', 1 1/2'' and 2''. Overall Size:- 495mm Blade Length:- 267mm
£220.00 inc VAT

Bead Forming Tools - 835H
Bead Forming Tools - 835H
Bangles and curtain rings are just two of the projects which can be undertaken with the use of Robert Sorby ring cutting tools. They can also be used to adorn stems with captive rings. Unlike some simular tools, the original Robert Sorby ring cutting tools are designed in such a way that sharpening and repeatability are not compromised. All tools are supplied with full use and sharpening instructions.
from £28.82 inc VAT
Beading Tool Set
Beading Tool Set
Robert Sorby bead forming tools to cut perfect semi-circular beads every time. The nose design permits multiple bead designs. This ia a boxed set of 5 RS-835H Bead Forming Tools 1/8", 3/16", 1/4", 5/16" & 3/8" .
£163.44 inc VAT

Robert Sorby 1/16" Slim Parting ToolRobert Sorby 1/16" Slim Parting Tool
Robert Sorby 1/16" Slim Parting Tool
This Robert Sorby 1/16" handy parting tool is designed to give the cleanest and finest of cuts with the minimum of waste wood. Its 1¼" blade width eliminates the flexing and twisting normally associated with such a thin blade. The double bevel HSS cutting face gives the very finest of cuts. For added security the blade is seated and riveted deep into the handle.
£28.06 inc VAT
Robert Sorby 3/8" & 5/8" Bead Cutting Tip
Robert Sorby 3/8" & 5/8" Bead Cutting Tip
The Robert Sorby Bead Cutter is one of a few additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 3/8" and 5/8" and is one of two beading cutters available for this tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
£19.47 inc VAT

Robert Sorby 3/8" & 5/8" Cove Cutting Tip
Robert Sorby 3/8" & 5/8" Cove Cutting Tip
The Robert Sorby Cove Cutting Tip is one of a few additional cutters available for the popular Robert Sorbyn Multi-tip Hollowing Tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. This cutter is designed for use with the following tools: Multi-tip...
£19.47 inc VAT
Robert Sorby 6 Piece Turning Tool SetRobert Sorby 6 Piece Turning Tool Set
Robert Sorby 6 Piece Turning Tool Set
Beginners 6 Piece Woodturning Set in a box. The ultimate full size, all round woodturning set. Perfect for the beginner for any type of turning from bowls to spindles. These 6 tools are also essential for the more experienced turner. Contains: 3/4" Roughing Tool 1/8" Parting Tool 3/8" Bowl Gouge 3/8" Spindle Gouge 3/4" Oval Skew 1/2" Round Nose Scraper A...
£195.00 inc VAT

Robert Sorby Beading & Parting ToolRobert Sorby Beading & Parting Tool
Robert Sorby Beading & Parting Tool
The Robert Sorby beading and parting tool is a versatile tool used for parting off as well as producing beads. Its size makes it very stable, but also very sensitive in use. Ideal for creating the spigots to fit in a chuck. 3/8" Beading & Parting Tool - 18¾" with handle.
£47.23 inc VAT
Robert Sorby Bedan Parting ToolRobert Sorby Bedan Parting Tool
Robert Sorby Bedan Parting Tool
The Robert Sorby bedan parting tool is used in the same way as the beading and parting tool the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding. 3/8" Bedan Parting Tool - 18¾" with handle.
£52.45 inc VAT

Robert Sorby Box ScraperRobert Sorby Box Scraper
Robert Sorby Box Scraper
The special cutting profile of this Robert Sorby box scraper makes it ideal for cutting the parallel side walls of end grain boxes. The small radius on the point at the bottom of the cutting section creates a smooth intersection between the side wall and the flat bottomed vessels. The profiles cause this to be very responsive and sensitive in use. 3/4" Box Scraper - 16" with handle
£52.32 inc VAT
Robert Sorby Captive Ring Tool Set
Robert Sorby Captive Ring Tool Set
This set of Robert Sorby Captive Ring Tools comes with tips capable of producing 3/16", ¼", 3/8", and ½" rings. These can be used on the stems or spindles of projects or may be used in their own right as items of jewellery, napkin rings, curtain ring or even wheels. The set enables the turner to cut rings of the four above mentioned sizes with just one tool simply by switching over the tips....
£69.03 inc VAT

Robert Sorby Chattertool - 215
Robert Sorby Chattertool - 215
Chattertool patterns add a neat, random decoration on end grain like box lids. These are created by using the Robert Sorby chattertool which comes with two different double-ended chattering tips and a handy scraper cutter. One chattertool tip (RS220) has a straight and a pointed end, the second (RS221) has a convex and a concave half-round end. Chatter patterns are created by causing the spring...
£76.84 inc VAT
Robert Sorby Continental Style Spindle GougesRobert Sorby Continental Style Spindle Gouges
Robert Sorby Continental Style Spindle Gouges
Robert Sorby continental style spindle gouges have a wonderful reputation for superb handling when doing spindle work.
from £38.37 inc VAT

Robert Sorby Curved ScraperRobert Sorby Curved Scraper
Robert Sorby Curved Scraper
The curved end profileof thie Robert Sorby Scraper makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an agressive cut, whilst retaining the butterfly sensitivity for the refining cuts. 3/4" Curved Scraper - 16" with handle
£52.32 inc VAT
Robert Sorby Detail Point Tool - 822H
Robert Sorby Detail Point Tool - 822H
This is a 3/8" round shaft with a 3 facet point. Ideal for for fine detailing on bowl and spindle work.
£35.16 inc VAT

Robert Sorby Diamond Section Parting ToolRobert Sorby Diamond Section Parting Tool
Robert Sorby Diamond Section Parting Tool
The special profile of this Robert Sorby diamond section parting tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby reducing the chance of burning the bottom of the parted project. 3/16" Diamond Parting Tool - 17" with handle.
£72.80 inc VAT
Robert Sorby Diamond Sharpening File (40 micron)
Robert Sorby Diamond Sharpening File (40 micron)
The Robert Sorby Diamond Sharpening File is the ideal handy accessory for sharpening replaceable tool tips. It can also be used on knives, scissors, even tungsten carbide router bits. For maximum life lubricate with water during use.
£15.53 inc VAT

Robert Sorby Diamond/Side Cut ScraperRobert Sorby Diamond/Side Cut Scraper
Robert Sorby Diamond/Side Cut Scraper
The Robert Sorby diamond/side cut scraper can be used on square bottomed boxes the end profiles allows the tool to create a right angled juncture between side wall and bottom. The 85º angle at the end prevents the tool from cutting th eside wall and the bottom at the same time. 3/4" Diamond/Side Cut Scraper - 16" with handle.
£56.60 inc VAT
Robert Sorby Easybeader - 814H
Robert Sorby Easybeader - 814H
The Easybeader allows traditional beads to be formed whilst also offering the option of producing perfect half beads. Suitable for use with both spindle and bowl work. The easybeader is a unique yet simple tool to cutting a series of consistent and regular beads. Originally conceived by a production turner it allows for easy replication of designs like bee-hive boxes, and honey dippers. Because...
from £35.84 inc VAT

Robert Sorby Fingernail Profile Bowl Gouges (Deep Flute)Robert Sorby Fingernail Profile Bowl Gouges (Deep Flute)
Robert Sorby Fingernail Profile Bowl Gouges (Deep Flute)
The profile of this Robert Sorby Fingernail Profile Bowl Gouge increases the flexibility allowing a woodturner to perform "pull cuts" without catching the lathe bed. The greater cutting tip area allows for both delicate shearing cuts and for heavy profiling cuts.
from £46.27 inc VAT
Robert Sorby Fingernail Profile Spindle GougesRobert Sorby Fingernail Profile Spindle Gouges
Robert Sorby Fingernail Profile Spindle Gouges
Robert Sorby fingernail profile spindle gouges are ideal for fine detailing on spindle work. The wing tips are ground back to reduce the danger of catching when working in confined areas.
from £32.66 inc VAT

Robert Sorby Fluted Parting ToolRobert Sorby Fluted Parting Tool
Robert Sorby Fluted Parting Tool
This Robert Sorby fluted parting tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. The long bevel has a milled flute which is the cutting face. The small bevel his the sharpening face. When parting off, this unique arrangement causes...
£54.25 inc VAT
Robert Sorby Full Round Scraper Cutter
Robert Sorby Full Round Scraper Cutter
The Robert Sorby Full Round Scraper Cutter is the perfect circular cutter for all general and large purpose hollow form turning. An incredible all rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening. The perfect accompaniment for the Robert Sorby Hollowmaster the tool it was designed for...
£16.30 inc VAT

Robert Sorby Heavy Duty - Bowl Finishing Inboard ScraperRobert Sorby Heavy Duty - Bowl Finishing Inboard Scraper
Robert Sorby Heavy Duty - Bowl Finishing Inboard Scraper
The Robert Sorby Heavy Duty Bowl Finishing Inboard Scraper is ideal for finishing bowls when working inboard. 1 1/2" (38mm) wide by 21" (525mm) overall length.
£109.00 inc VAT
Robert Sorby Heavy Duty - Bowl Finishing Outboard ScraperRobert Sorby Heavy Duty - Bowl Finishing Outboard Scraper
Robert Sorby Heavy Duty - Bowl Finishing Outboard Scraper
The Robert Sorby Heavy Duty Bowl Finishing Outboard Scraper is ideal for finishing when working in the outboard mode of the lathe. 1 1/2" (38mm) wide by 21" (525mm) overall length.
£109.00 inc VAT

Robert Sorby Heavy Duty - Full Round ScraperRobert Sorby Heavy Duty - Full Round Scraper
Robert Sorby Heavy Duty - Full Round Scraper
The Robert Sorby Heavy Duty Full Round Scraper is ideal for finishing on bowls and platters especially where a smooth curve is required. 1 1/2" (38mm) wide by 21" (525mm) overall length.
£109.00 inc VAT
Robert Sorby Hollowmaster
Robert Sorby Hollowmaster
The Robert Sorby Hollowmaster is the perfect complement to the Multi Tip Hollowing Tool. It uses the same unique design of a meaty 3/4" flat shank which when laid on the tool rest gives ample support to prevent the tool from being turned over by the rotation of the wood. You are not fighting the laws of nature, but removing wood with ease. It's swan neck design means that the Hollowmaster...
£77.82 inc VAT

Robert Sorby Long & Strong Spindle GougesRobert Sorby Long & Strong Spindle Gouges
Robert Sorby Long & Strong Spindle Gouges
Robert Sorby long and strong spindle gouges are the same as standard but with a longer blade allowing you additional reach into the workpiece.
from £44.26 inc VAT
Robert Sorby Medium Tear-drop Scraper
Robert Sorby Medium Tear-drop Scraper
The Robert Sorby Medium Tear-drop Scraper, like its big brother (Large Tear-drop RS-213C) provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved...
£19.54 inc VAT

Robert Sorby Micro Woodturning Tool Set
Robert Sorby Micro Woodturning Tool Set
Ideal for small projects such as model making or dolls house furniture. A 5 piece set comprising 1/4" Spindle Gouge, 1/8" Spindle Gouge, 1/4" Round Nose Scraper, 1/4" Skew Chisel and 1/16" Parting Tool. The tools have an overall length of 10".
£129.71 inc VAT
Robert Sorby Midi HollowmasterRobert Sorby Midi Hollowmaster
Robert Sorby Midi Hollowmaster
The Robert Sorby Midi Hollowmaster is designed for generating square sections such as shoulders or tenons where a turned part is to be assembled into a hole - a chair leg is good example. This cutter is also useful on the outside of a round form, as well as long straight sections on spindle work. Excellent results can be achieved in shear scraping mode with cutter especially effective shear scraping...
£64.76 inc VAT

Robert Sorby Midi Multi-Tip Hollowing Tool
Robert Sorby Midi Multi-Tip Hollowing Tool
All the benefits and attributes of the full size Robert Sorby Multi-tipped Hollowing tool (RS-200KT) but 2/3 the size, giving access through a much smaller aperture when turning fine hollow forms. 1/2" flat surface allows for aggressive hollowing and the swivel clamp allows under cutting. This tool comes full instructions and three cutters (RS-222, RS-111C and RS-112C).
£73.79 inc VAT
Robert Sorby Midi Point TipRobert Sorby Midi Point Tip
Robert Sorby Midi Point Tip
The Robert Sorby Midi Point Tip cutter provides an excellent chouse for creating parallel sides on small boxes and vases. The flexible cutter will also creat flat surfaces on the bottom of pieces as well as crsip corners. Designed for the Midi Multi-tip hollowing tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the...
£12.65 inc VAT
Page: 1 | 2 | 3 |