Sort By
Per Page
View
Grid
List
Robert Sorby Honing Paste
Applied to a buffing mop the honing paste creates a highly polished finish on any steel.
Robert Sorby Honing Wheel
Honing wheel to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Robert Sorby Honing Wheel Arbor
Honing wheel arbor to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Robert Sorby Honing Wheel Kit
This kit uses the abrasive honing wheel which can be shaped to allow for honing of gouge flutes - especially useful for woodcarving tools.
Items also available individually.
Robert Sorby Pigtail Mandrel
The Pigtail Mandrel to fit the ProEdge Sharpening Machine.
Also part of the Buffing Kit (PEBUFFKIT)
Robert Sorby ProEdge Buffing Kit
The Robert Sorby ProEdge Buffing Kit includes:
Robert Sorby ProEdge Pigtail Mandrel
Robert Sorby ProEdge Buffing Wheel
Robert Sorby ProEdge Ultra-Fine Buffing Compound
Robert Sorby ProEdge Knife Holder Large
For hunting knives and those with blades over 8".
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Robert Sorby ProEdge Knife Holder Small
The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long.
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Robert Sorby ProEdge Long Grind Jig
Helps you to create three different fingernail profiles.
Robert Sorby ProEdge Proset
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.
Robert Sorby ProEdge Skew Jig
The Skew Jig allows the turner to accurately and safely sharpen his skew chisels.
Robert Sorby Short Tool Platform with Arm
Increases access when tools are getting old and worn.
Robert Sorby Standard Gouge Jig
Allows easy sharpening of all standard ground woodworking gouges.
Robert Sorby Woodworkers' Square Guide
This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). This jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform.
Ideal for sharpening chisels and plane irons.
Robert Sorby Woodworking Chisel Jig
Accurately ensures a straight cutting edge on any woodworking chisel.
Robert Sorby Bowl Reversing Jaws
Robert Sorby Bowl Reversing Jaws are designed for finishing the outside and foot of a bowl. Lightweight, but extremely strong solid aluminium construction with 10 different location points to hold a variety of sizes of bowl. Rubber grips hold the project in place without causing damage.
Maximum bowl diameter 9". 10" capacity over bed bars.
The photo shows the Bowl Reversing Jaws fitted to a...
Robert Sorby SteadyPro Turning System
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Robert Sorby SteadyPro Turning System - With Stem
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Robert Sorby Tool Rest Adjustment Collar
The Robert Sorby Tool Rest Adjustment Collar allows easy height adjustments of your tool rest by up to 1/2" (13mm) without losing the set height when the locking handle is released. It features an outer adjustment ring for precise control and an Acetal seating disc for smooth operation. Available in stem sizes of 3/4", 1", 25mm, and 30mm, it's perfect for woodturners seeking flexibility...
Robert Sorby Deluxe Revolving Centre System
The Robert Sorby Deluxe Revolving Centre System is a versatile woodturning tool set that includes six different accessories: a deluxe revolving centre, ring centre, hollow centre, location pin, 60-degree point, mini 60-degree point, and cup centre. Designed to accommodate various tasks, this set ensures smooth and precise operation for woodturners. Available in both 1 MT and 2 MT, it also comes with...
Robert Sorby Long Nose Jaws
Robert Sorby Long Nose Jaws have a reach of 4" allowing bowls to be remounted internally. The shape of the jaws allows easy access to the back of the project. Dovetailed internally and externally for extra versatility.
The photo shows the Long Nose Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Patriot Chuck - Direct Thread
Dedicated M33 x 3.5mm.
Robert Sorby Patriot Chuck
No insert or exert included.
Please select your insert from the list below, or visit here
Robert Sorby Patriot Chuck Inserts
The Robert Sorby inserts will allow your Patriot chuck to be fitted to almost every lathe. Available in metric and imperial sizes.
If you do not see your lathe spindle listed please get in touch.
Robert Sorby Pin Jaws 1' (25mm)
Robert Sorby 1" Pin Jaws have extra length of these jaws makes them suitable for awkward pieces of wood like burrs. Dovetailed on the inside and outside they are ideal for small projects or tall turned items like pepper-mills.
The photo shows the Pin Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ1 Jaws - 1' (25mm)
1" Jaws. With a fine internal and external dovetail, these 1" jaws are perfect for gripping miniature projects. The jaws expand from 25mm to 50mm and compress from 39mm down to 14mm.
Also compatible with Nova and Supernova chucks.
The photo shows the RSJ1 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ15 Jaws 1 3/8' (35mm)
1 3/8" Jaws. Designed for smaller projects like boxes and bowls up to 6".
The photo shows the RSJ15 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ3 Jaws 2 3/4'' (70mm)
2 3/4" Jaws. For larger projects and bowls up to 13" where a little extra grip is required.
The photo shows the RSJ3 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ4 Jaws 3 1/2'' (89mm)
3 1/2" Jaws. Intended for bowls up to 16" needing substantial holding power.
The photo shows the RSJ4 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ5 Jaws 4 1/4'' (108mm)
Robert Sorby RSJ5 4¼" Jaws these jaws enable a much bigger recess or spigot to be held and are hence designed for bowls and platters over 16".
The photo shows the RSJ5 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJDG Deep Grip Jaws
Robert Sorby Deep Grip Jaws have deep sides of these jaws make them ideal for large logs or awkward pieces of wood. They come with both internal and external dovetails to hold cumbersome pieces securely.
The photo shows the RSJDG Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Zero Jaws
These innovative jaws allow the turning of extremely fine, detailed pieces like lace bobbins as they close right down. The unique dome shape enables the turner to work close to his project. At the same time the dome can be used for internal gripping of larger projects without the fear of marking.
The photo shows the Zero Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Steb Drive
The Robert Sorby Steb Drive is a highly effective woodturning accessory designed for use with a lathe. It fits into the jaws of a Patriot chuck and uses serrated teeth combined with a spring-loaded centre pin for a secure grip on wood, preventing slippage during turning. Available in multiple sizes (7/8", 1/2", and 1 1/4"), this tool is perfect for woodturning projects that require precision...
Robert Sorby Tool Rest Stem
These stems work with the Robert Sorby Modular Tool Rest System.
Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish.
Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes.
Robert Sorby Tool Rest Crossbar 4''
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby Tool Rest Crossbar 6''
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby Tool Rest Crossbar 9''
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby External Bowl Crossbar 9''
This modular tool rest system from Robert Sorby enables the turner to build up a collection of tool rests without going to great expense.
Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem.
Cross bars are specially hardened to avoid those troublesome nicks and...
Robert Sorby Box Scraper Platform
The modular tool rest system from Robert Sorby enables the turner to build up a collection of tool rests without going to great expense.
Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external. This box scraper platform can be used in conjunction with just one stem.
Cross bars are specially hardened to avoid those troublesome nicks and...