Sort By
Per Page
View
Grid
List
Rob Cosman 3/4 Dovetail Saw
Cutting tiny dovetails (dovetails in 3/8 inch and less thick stock) is a bit challenging if using Rob's regular sized dovetail saw - it can be done, but I wanted a better saw for this application. That is why he designed his 3/4 dovetail saw. As compared to Rob's regular-sized dovetail saw, the 3/4 dovetail saw's thinner saw plate, smaller teeth, shallower depth of cut, and shorter overall...
Rob Cosman Bench Crosscut Saw
Every hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. Rob has designed and manufactured two different professional crosscut saws; his Joinery Crosscut and Bench Crosscut to meet this requirement.
Both of Robs crosscut saws are specialized for crosscutting applications. The Bench Crosscut Saw is designed for general crosscutting while his Joinery Crosscut...
Rob Cosman Dovetail Saw - Ebony Resin Handle
Rob describes the first of his hand saw offerings, the dovetail saw. After teaching thousands of folks to cut dovetails by hand, Rob has tailored a saw to address the most common problems. With the intent to enable woodworkers to assemble their dovetails straight from the saw this may very well be the missing link!
Unique features include:
Split lines with the Super Fine 22tpi starting tip,...
Rob Cosman Kerf Saw X-10
If you cut half-blind dovetails you will love Rob's Kerf saw! This is the regular Ker X-10 to work in saw kerfs in the .024" to .026" width range (designed for Rob's stanadard dovetail saw).
The Kerf X-10 completes the saw cut.
Waste removal is faster than paring and more accurate. This saw works with soft and hardwoods.
The handle is made of Mahogany and the blade is affixed...
Rob Cosman Kerf Saw X-10 3/4
If you cut half-blind dovetails you will love Rob's Kerf saw! This is the narrower Ker X-10 3/4 to work in saw kerfs in the .019" to .021" width range (designed for Rob's 3/4 dovetail saw).
The Kerf X-10 3/4 completes the saw cut.
Waste removal is faster than paring and more accurate. This saw works with soft and hardwoods.
The handle is made of Mahogany and the blade is...
Rob Cosman Shawn Shim Dovetail Offset Tool
This is the larger of the two Shawn Shims that Rob offers.
One of the most difficult tasks in hand cutting dovetails is accurately transferring the tails and precisely sawing the pins. Rob's improved method of transferring tails to the pin board by offsetting the tailboard by the thickness of the saw kerf takes all the guess work out of where to saw.
Offsetting by the exact thickness can...
Rob Cosman Shawn Shim Dovetail Offset Tool 3/4
This is the smaller of the two Shawn Shims that Rob offers.
One of the most difficult tasks in hand cutting dovetails is accurately transferring the tails and precisely sawing the pins. Rob's improved method of transferring tails to the pin board by offsetting the tailboard by the thickness of the saw kerf takes all the guess work out of where to saw.
Offsetting by the exact thickness can...
Rob Cosman Joinery Crosscut Saw - Ebony Resin Handle
Unique features of Rob’s joinery crosscut saw include;
with only .002 set per side this 15tpi saw will slice through wood and leave a ready-to-join surface, right out of the box!
you have a choice, we saw, shape, sand and buff to a satin finish, "ebony resin" composite handles with carved finger recesses for extra comfort and control.
the extra heavy brass back provides perfect...
Rob Cosman Large Tenon Saw - Rip Cut - Ebony Resin Handle
Unique features include;
Start the kerf easily with the Super Fine 20 tpi starting tip, then gain the speed you need for heavy cuts with the 12 tpi blade - we eased the angle of the cutting face a few degrees to reduce the grabbing that accompanies larger saw teeth.
Very slight .002” (per side) set makes for dead straight saw cuts and smooth ready to glue surfaces - the blade is 12 inches...
Rob Cosman Wood Hinge Drill Kit - Imperial
Rob Cosman's Wood Hinge Drill Kit as seen on "The Woodhinge Box"
Rob made thousands of boxes using this style of hinge and I have designed four jigs to precisely drill the hole in the center of dowel segments (the most difficult task).
Kit allows you to drill 1/16 inch and 1/8 inch size holes in 1/4 inch, 1/2 inch, 3/8 inch, and 3/4 inch diameter dowels.
Kit includes 1/16 inch...
Rob Cosman's Angle Trainer
The Hand Plane is one of the most important tools in your workshop but if it is not properly sharpened, it is useless. The Rob Cosman Angle Trainer is the perfect tool to help you develop the proper method of hand sharpening your plane blade. When you feel comfortable, you will be able to hand sharpen your plane blade like a professional.
The biggest advantage of the Rob Cosman Angle Trainer...
Rob Cosman Dovetail Marker
The Rob Cosman dovetail marker allows you to layout both the angled face mark and the squared end mark. Marking dovetail pins and tails can be a tedious task without a well designed marker, Rob's enables you to do so quickly and accurately. Made from Eastern Maple, Rob planes the angles on a shooting board to ensure accurate gauges.
One side is 1 in 6 (1:6 rake) for laying out softwood dovetails,...
Rob Cosman Dovetail Marking Knife
Rob Cosman has been planning this dovetail marking knife for many years and he finally brings this tool to the marketplace. Hand Cut Dovetailing is Rob's specialism and he has no doubt this tool will complete the stable of his dovetailing tools and instructional dvds.
This is what he says.."For over thirty years one of my most trusted dovetail tools has been my modified marking knife. Working...
Replacement Blades for Marking Knife
Replacement blades for Rob's Dovetail Marking Knife.
Marking Knife Blade:
The straight blade is designed for tracing tails onto the pin-board using traditional marking techniques.
Radius tip “track’s” in the end grain.
Wide at the blade tip for better registration against the tail.
Regular Saw-Tooth Blade:
Designed specifically for...