Thomas Flinn Pax 1776 Dovetail Saw
Thomas Flinn Pax 1776 Dovetail Saw
Available in lengths 8", 10" and 12" with 20tpi, in Rip (for cutting with the grain). Blade depths are as follows: 8" Blade length = Blade depth 2" 10" Blade length = Blade depth 2" 12" Blade length = Blade depth 2 1/2" These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The dovetails saws are beautifuly...
from £150.00 inc VAT
Thomas Flinn Pax 1776 Tenon Saws
Thomas Flinn Pax 1776 Tenon Saws
Available in lengths 10" and 12" with 13 or 15 tpi, in either Rip (for cutting with the grain) or Crosscut (for cutting across the grain) formation. Blade depths are as follows: 10" Blade length = Blade depth 2" 12" Blade length = Blade depth 2 1/2" These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The tenon saws are...
from £150.00 inc VAT

Thomas Flinn Pax 1776 Variable Pitch Saws
Thomas Flinn Pax 1776 Variable Pitch Saws
Available as a variable pitch version (10") with the teeth on the blade starting at 20tpi and gradually getting larger up to around 10tpi at the end of the blade. This type of saw allows easy starting of cuts and faster cuts due to the coarser teeth towards the end of the blade. These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The tenon saws are...
£174.00 inc VAT
Thomas Flinn Pax Beech Handled Dovetail & Tenon Saws
Thomas Flinn Pax Beech Handled Dovetail & Tenon Saws
The Pax range of saws are made by Thomas Flinn & Co in Sheffield, England. They perform like the 1776 premium range, just don't have all the refinery. So instead of an open Walnut handle, these saws have a closed handle made from steamed Beech with a two-tone gloss finish. They have the same heavy brass back which is folded to give the blade its tension. If you like a heavier saw, then this...
from £96.00 inc VAT

Thomas Flinn Pax Hand Saws
Thomas Flinn Pax Hand Saws
Handcrafted of the finest alloy steel these saws are taper ground and breasted (meaning less teeth are in contact with the wood and therefore less friction) and are precisely set and sharpened by hand to ensure the best possible cut without binding. The handle is made from the finest steamed beech with a two-tone gloss finish. With a variation of teeth sizes, there is a Handsaw for every type of...
from £98.50 inc VAT
Thomas Flinn Pax Mini Gent's Saw 25tpiThomas Flinn Pax Mini Gent's Saw 25tpi
Thomas Flinn Pax Mini Gent's Saw 25tpi
The Pax Mini Gents Saw is made for more precision work than the larger Gent’s saws and often a favourite with model makers and other woodworkers who need to cut in fine areas. The saw has a brightly polished brass back and a Walnut handle. Individually blister packed. 24tpi as standard.
from £21.50 inc VAT

Thomas Flinn Pax Gent's Saw
Thomas Flinn Pax Gent's Saw
The perfect partner to the Pax Hand and Tenon Saws, the classic Gents Saws are made for dovetail applications and are still a very popular seller today and come in a range of sizes to compliment your work. The saw has a brightly polished brass back and a Walnut handle. Individually blister packed. 20tpi as standard.
from £19.80 inc VAT
Thomas Flinn Pax Reversible Mini Gent's Saw
Thomas Flinn Pax Reversible Mini Gent's Saw
A 4" version of the 10" Reversible Gents Saw, the saw is made to facilitate the right or left-handed worker. The cranked rosewood handle allows you to cut into even smaller awkward corners than the larger Reversible Saw. This saw has a brightly polished brass back and a Walnut handle. Individually blister packed. 20tpi as standard.
£24.60 inc VAT

Thomas Flinn Pax Reversible Gent's Saw 10'
Thomas Flinn Pax Reversible Gent's Saw 10'
The Reversible Gent’s Saw has been made in such a way to facilitate the left and right-handed worker. The cranked rosewood handle allows you to cut into the most awkward of corners with ease. This saw has a brightly polished brass back and a Walnut handle. Blade length 10". Individually blister packed. 15tpi as standard.
£30.50 inc VAT
Thomas Flinn 3ft One Man X Cut Saw
Thomas Flinn 3ft One Man X Cut Saw
The Thomas Flinn 3ft One Man X Cut Saw has a clear finished beech handle and comes complete with an auxiliary handle which can be attached to the front of the blade so you can get some additional assistance with cutting if necessary. The handle can also be fitted to the top of the blade to help you push the blade if using alone. The teeth are a Great American style tooth which uses gullets to enable...
£89.46 inc VAT

Thomas Flinn Two Man X Cut Saw
Thomas Flinn Two Man X Cut Saw
The teeth on the Thomas Flinn Two Man X Cut Saws work in a way that the teeth cut on the pull stroke on each side of the tooth and so actually cut in each pulling direction. The Two Man X Cut Saws come with two wooden handles. Available in a range of sizes to suit your needs from 4ft-6ft. Please note; we try our best to keep the 4ft version in stock, however the 5ft and 6ft will have a lead time...
from £92.00 inc VAT
Pax 10' Guitar Saw
Pax 10' Guitar Saw
Also sometimes known as a Fret Saw, the Pax Guitar Saw is ideal for cutting the frets on a guitar. It has two holes in the blade so that a depth measuring gauge can be mounted (not supplied with the saw). The saw has a brightly polished brass back and a Walnut handle. Kerf: 0.022" approx. 16tpi as standard.
£28.85 inc VAT

Pax Jewellers Saw
Pax Jewellers Saw
The Pax Jewellers Saw has a very thin alloy steel blade and is made for the highest precision work. The saw has a brightly polished brass back and a Walnut handle. 20tpi as standard. Blade length 6". Individually blister packed.
£21.85 inc VAT
Thomas Flinn Pax Fine Curved Inlay Saw 20tpi
Thomas Flinn Pax Fine Curved Inlay Saw 20tpi
The Pax Fine Inlay Saw is made for similar purposes to the Veneer Saw although this saw has 20tpi with a super thin curved blade specially crafted for the finest veneer work. The saw has a brightly polished brass back and Walnut handle. Blade length 3". Individually blister packed.
£23.40 inc VAT

Thomas Flinn Pax Flexible Flush Cutting Saw 20tpi
Thomas Flinn Pax Flexible Flush Cutting Saw 20tpi
The Pax Flexible Flush Cutting Saw has a very flexible alloy steel bade which cuts on the pull stroke. As it has no set, this saw is excellent for use in cutting dowels etc. as you can get the saw right to the edge with out leaving a very smooth surface. The saw has a brightly polished brass back and a Walnut handle. Blade length 6". 20tpi as standard. Individually blister packed.
£18.50 inc VAT
Thomas Flinn Pax Veneer Saw 15tpi
Thomas Flinn Pax Veneer Saw 15tpi
The Pax Veneer Saw is made to enable cuts to be started in the centre of a panel of wood and for other inlaying work. The saw has 15tpi and the two different sides of the blade are made so that one side has a crosscut tooth formation and the other side has a rip tooth formation. The saw has a Walnut handle and are individually blister packed. Blade length 3".
£22.60 inc VAT

Pax Cabinet Scraper Set (Shaped Set)
Pax Cabinet Scraper Set (Shaped Set)
The Pax Cabinet Scraper Sets are a "must" for woodworkers. Made from stiff carbon steel (saw steel) these are used to scrape along wood to give a smooth finish to your projects. One of the simplest products that work wonders! . The Shaped Set contains: 1 x Concave/Convex Scraper 1 x Gooseneck Scraper 1 x Double Curved Scraper *NEW!* 1 x 5" x 2 ½" Scraper These are supplied ready to use but can...
£13.42 inc VAT
Pax Cabinet Scraper Set (Square Set)
Pax Cabinet Scraper Set (Square Set)
The Pax Cabinet Scraper Sets are a "must" for woodworkers. Made from stiff carbon steel (saw steel) these are used to scrape along wood to give a smooth finish to your projects. One of the simplest products that work wonders! . The Square Set contains: 1 x 6" x 3" Scraper 1 x 5" x 2 ½ " Scraper 1 x 4" x 2" Scraper These are supplied ready to use but can be re-sharpened with use of a burnisher.
£13.42 inc VAT

Pax Burnisher
Back In Stock
Pax Burnisher
Used in conjunction with Cabinet Scrapers to hone their edges after use. * Walnut handle with Brass Ferrule * Steel blade * Puts burr back on Cabinet Scrapers to keep their edges sharp
£20.89 inc VAT
Lynx Concave Scraper SetLynx Concave Scraper Set
Lynx Concave Scraper Set
The Lynx Concave Scraper Set contains 2 scrapers shaped specifically to scrape curved areas such as spindles, chair legs etc. The high grade steel used on these scrapers, has been cut with various concaved areas to suit different sized curves. The recess areas are sized as follows: Scraper 1 - 1/4", 3/8", 1/2", 5/8" and 6/8" Scraper 2 - 7/8", 1", 1 1/8", 1 1/4" and 1 1/2
£10.66 inc VAT

Lynx Convex Scraper SetLynx Convex Scraper Set
Lynx Convex Scraper Set
The Lynx Convex scraper set contains 2 scrapers that are specifically shaped to scrape in recesses such as on skirting boards etc. The high grade steel used on these scrapers, has then been cut with various convex areas on the scraper to suit various sized areas. The convex areas are the following sizes: Scraper 1 - 1/4", 3/8", 1/2", 3/4" and 5/8" Scraper 2 - 7/8", 1", 1 1/8", 1 1/4" and 1 1/2
£10.66 inc VAT
Lynx Mini Scraper Set of 4
Back In Stock
Lynx Mini Scraper Set of 4
The Lynx four piece Mini Scraper Set is the perfect way to smooth/remove wood and finish small areas. This set has the following shapes included: Mini gooseneck - good for curved areas Mini oval - good for curved areas Mini square - good for a variety of straight edges for a wide and even has notches in which is good for luthier work ie acoustic bridge saddle crowning Mini Concave/Convex - good for...
£12.78 inc VAT

Lynx Quadrant Scraper Set
Lynx Quadrant Scraper Set
This Lynx Quadrant Scraper Set is the perfect solution for scraping various quadrant areas and has the benefit of the straight edge to get into corners, which sanding cannot always do. This two piece set has the following quadrant sizes cut from the scraper: Scraper 1 - 1/8", 3/16", 1/4", 5/16" Scraper 2 - 3/8", 7/16", 1/2", 5/8" These are pefect for using on sash window restoration, mouldings,...
£10.66 inc VAT