Lie-Nielsen Set of 5 Bevel Edge Chisels
Lie-Nielsen Set of 5 Bevel Edge Chisels
The ever popular Lie-Nielsen A2 bevel edge chisels as a set. The most popular 5 sizes are included - 1/4", 3/8", 1/2", 3/4", 1". This does not include a tool roll.
£540.00 inc VAT
Robert Sorby Boxed Set of 5 Traditional Bevel Edged Chisels
Robert Sorby Boxed Set of 5 Traditional Bevel Edged Chisels
Set of 5 Robert Sorby Traditional "carver" style chisels with boxwood handle, brass ferule and leather washer in a cardboard presentation box. Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels Overall Size 265 - 340mm Blade Length 127-178mm
£178.19 inc VAT

Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. This set of 5 comes in a cardboard presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1'' Fitted with a tapered brass ferrule for comfort and elegance.
£218.05 inc VAT
Robert Sorby Set of 5 Octagonal Handled Bevel Edged Chisels
Robert Sorby Set of 5 Octagonal Handled Bevel Edged Chisels
Robert Sorby Set of 5 Octagonal boxwood handled Bevel Edge Chisels with brass ferule and leather washer in a cardboard presentation box. Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels Overall Size 265 - 340mm Blade Length 127 - 178mm
£209.37 inc VAT

Veritas PM-V11 Bench ChiselsVeritas PM-V11 Bench Chisels
Back In Stock
Veritas PM-V11 Bench Chisels
Precision made in Veritas' own machine shop, these bench chisels are milled from PM-V11 steel (Rc61-63), an innovative proprietary alloy. This metal's micro-structure makes it extremely durable, so it can withstand the impact of heavy chopping cuts without chipping or deforming as readily as other tool steels, even at bevel angles as low as 20°. Highly wear resistant, the edge typically...

5

from £82.00 inc VAT
Pfeil Carpenter Chisels
Pfeil Carpenter Chisels
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels. The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished. Bevel angle 25°, razor sharp. 4mm wide to 40mm wide. Overall length 240-260mm.
from £23.00 inc VAT

Narex Richter Bevel Edge ChiselsNarex Richter Bevel Edge Chisels
Narex Richter Bevel Edge Chisels
Until recently we stocked the Narex 8116 range of bevel edge chisels which were popular amongst students and people starting out in woodworking. Most importantly the steel in the 8116 range was very good but in our opinion the balance and feel would sometimes let them down. I'm glad to say that this new premium range 8150 from Narex is a massive improvement upon the old chisels. Yes they are not...

5

from £33.00 inc VAT
Ashley Iles MKII Bench ChiselsAshley Iles MKII Bench Chisels
Ashley Iles MKII Bench Chisels
These Ashley Iles MKII bench chisels are so attractively priced - how do they do it? These MKII chisels are a great improvement upon the original MKI's. Hardened O1 high carbon steel with slim tapered blades which gives you access to tight spaces. The backs are also ever so slightly concave (a few thousands of an inch!) This is designed to help with sharpening. Padauk handles with brass ferules. Set...
from £24.76 inc VAT

Lie-Nielsen A2 Bevel Edge Chisels
Back In Stock
Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 bevel edge chisels - these will hold their edge longer than high carbon chisels and therefore require less frequent sharpening. The chisel edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand at 400 grit. The bevel is flat ground at 30°, but a higher secondary bevel (about 35°) is advisable,...
from £112.00 inc VAT
Robert Sorby Gilt Edge Chisels - Rosewood
Robert Sorby Gilt Edge Chisels - Rosewood
Gilt Edge chisel with rosewood carver handle. Fitted with a tapered brass ferrule for comfort and elegance. These are being discontinued due to the difficulties of obtaining the rosewood.
from £41.99 inc VAT

Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
from £40.62 inc VAT
Robert Sorby Octagonal Handled Bevel Edged Chisel
Robert Sorby Octagonal Handled Bevel Edged Chisel
Octagonal boxwood handle with brass ferule and leather washer. Overall Size 265 - 340mm Blade Length 127 - 178mm
from £39.79 inc VAT

Robert Sorby Traditional Bevel Edged Chisel
Robert Sorby Traditional Bevel Edged Chisel
Traditional "carver" style boxwood handle with brass ferule and leather washer. Overall Size 265 - 340mm Blade Length 127-178mm
from £32.69 inc VAT
Henry Taylor Bevel Edge ChiselsHenry Taylor Bevel Edge Chisels
Henry Taylor Bevel Edge Chisels
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles and brass ferrules. Made in Sheffield, England for over 150 years. F55 - 1/4" (6mm) F56 - 3/8" (9mm) F57 - 1/2" (12mm) F59 - 3/4" (19mm) F60 - 1" (25mm)
from £24.00 inc VAT

Oire Nomi Suminagashi Japanese Chisel
Oire Nomi Suminagashi Japanese Chisel
Overall length 220mm (blade 60mm) These chisels are made from blue steel in the Sanjo region of Japan. They are blacksmith made chisels and will require some fettling (i.e the cutting edge might need to be squared up, but nothing major!), but once this is done you will have a chisel for life. The high carbon-steel edge guarantees perfect sharpness and precision and is backed by a body of softer...
from £120.00 inc VAT
Henry Taylor Short Cranked Bevel Edged ChiselsHenry Taylor Short Cranked Bevel Edged Chisels
Henry Taylor Short Cranked Bevel Edged Chisels
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
from £34.00 inc VAT

Henry Taylor Bevel Edge Chisels Set of 5Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles with brass ferrules. Made in Sheffield, England for over 150 years. F55 - 1/4" (6mm) F56 - 3/8" (9mm) F57 - 1/2" (12mm) F59 - 3/4" (19mm) F60 - 1" (25mm) As recommended by Simon Frost in September 2021 issue of The Woodworker. Supplied with a...
£120.00 inc VAT
Pfeil Carpenter Chisel SetsPfeil Carpenter Chisel Sets
Back In Stock
Pfeil Carpenter Chisel Sets
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels. The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished. Bevel angle 25°, razor sharp. 4mm wide to 40mm wide. Overall length 240-260mm. The...
from £129.50 inc VAT

Pfeil Bench Chisel Set
Pfeil Bench Chisel Set
Set of 6 Pfeil Bench chisels in a beechwood case. Widths included are 6mm, 10mm, 12mm, 16mm, 20mm and 26mm.
£174.00 inc VAT
Henry Taylor Short Cranked Bevel Edged Chisels Set of 4Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
£164.00 inc VAT

Ashley Iles Dovetail ChiselsAshley Iles Dovetail Chisels
Ashley Iles Dovetail Chisels
These Ashley Iles Dovetail Chisels have the same O1 oil hardened blades as their ever popular bench chisels, the difference being that these chisels are designed pretty much exclusively for dovetails. This is because they have an oval shaped top section which gives you a very minimal edge along the sides and therefore gives you access into even the tightest of spots for cleaning out dovetails. Available...
from £21.00 inc VAT
Ashley Iles Skew Fishtail Chisels (Pair)Ashley Iles Skew Fishtail Chisels (Pair)
Ashley Iles Skew Fishtail Chisels (Pair)
A pair of 1/4" (6mm) right and left hand Ashley Iles skew fishtail chisels. Designed to fit into awkward spaces when cleaning out dovetails and alike. Hardened O1 high carbon steel. Padauk handles with brass ferules.
£52.00 inc VAT

Lie-Nielsen Fishtail Chisel 1/2''
Lie-Nielsen Fishtail Chisel 1/2''
Fishtail Chisels are perfect for reaching the back corners of half-blind dovetails and paring other hard-to-reach areas. Their unique shape offers versatility for right and left hand recesses. Made from A2 Tool Steel, hardened to RC 60-62. Maine-harvested Hornbeam handles. Overall length is approximately 8". The bevel comes ground sharp at 25º, but a higher secondary bevel is advisable,...
£168.00 inc VAT
Veritas PM-V11 Butt ChiselsVeritas PM-V11 Butt Chisels
Veritas PM-V11 Butt Chisels
Veritas Butt chisels are made in wider sizes than most chisels, making them efficient for wasting out large areas, such as the mortices for installing butt hinges. They also have shorter blades that some woodworkers find offer improved control. Made from PM-V11 tool steel, the blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance...
from £77.90 inc VAT

Ashley Iles MKII Butt ChiselsAshley Iles MKII Butt Chisels
Ashley Iles MKII Butt Chisels
Butt or American Pattern Bevel Edge Chisels are a shorter version of the standard length. Used where the chisel is pushed rather than struck with a mallet, the shorter handle fitting snugly into the palm of the hand. Hardened O1 Carbon Steel. Padauk handles. Set of 5 includes 1/4" (6mm), 3/8" (9mm), 1/2" (12mm), 3/4" (19mm) and 1" (25mm).
from £24.75 inc VAT
Pfeil Butt ChiselsPfeil Butt Chisels
Pfeil Butt Chisels
Pfeil Butt Chisels allow the maximum cutting control by allowing you to get very close to your piece of work. Ideal for cleaning up and fitting joints, modelling or working in a restricted space. Octagonal handle with oval section, robust Acacia wood. Razor-sharp finely honed blade, HRC 60. Blade length 87mm and overall length 155mm Pfeil Butt Chisels are available in 6mm (¼"),...
from £22.00 inc VAT

Henry Taylor Long Thin Bevel Edge Paring ChiselsHenry Taylor Long Thin Bevel Edge Paring Chisels
Henry Taylor Long Thin Bevel Edge Paring Chisels
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge. Blade about 8¾" long.
from £38.40 inc VAT
Robert Sorby Thin Bladed Paring Chisel
Robert Sorby Thin Bladed Paring Chisel
Robert Sorby thin bladed paring chisels are traditionally used by pattern makers and now a favourite with cabinet makers, carpenters and joiners. Used for accurate hand paring and fitting without the use of a mallet. Overall Size:- 380-407mm Blade Length 248mm
from £53.78 inc VAT

Henry Taylor Cranked Bevel Edge Paring ChiselsHenry Taylor Cranked Bevel Edge Paring Chisels
Henry Taylor Cranked Bevel Edge Paring Chisels
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times. Blade about 8¾" long.
from £55.20 inc VAT
Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5
Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times. Blade about 8¾" long. Set includes 1/4", 1/2", 3/4", 1" and 1 1/4" chisels.
£317.00 inc VAT

Henry Taylor Long Thin Bevel Edge Paring Chisels Set of 5
Henry Taylor Long Thin Bevel Edge Paring Chisels Set of 5
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge. Blade about 8¾" long.
£217.00 inc VAT
Robert Sorby Sash Mortice Chisel
Robert Sorby Sash Mortice Chisel
Used for light mortising work, boxwood handle. A 2 degree taper prevents binding in the cut. Ideal for clearing out waste from mortices for tenons, locks and hinges. Can be used with a mallet. Overall Size:- 279mm Blade Length 159mm
from £48.74 inc VAT

Veritas PM-V11 Mortice ChiselsVeritas PM-V11 Mortice Chisels
Veritas PM-V11 Mortice Chisels
These are substantial mortice chisels. The blades are more than 1/2" thick at the heel of the bevel and are a consistent width from tip to shoulder for accurate registration in a mortice. The chisel sides are slightly relieved to reduce sidewall friction and allow for minor cut corrections. Each has a 25° primary bevel to make deep cuts easier, with a 35° secondary bevel to give them...
from £117.00 inc VAT
Lie-Nielsen Mortice Chisels
Lie-Nielsen Mortice Chisels
Designed with cabinetmaking in mind, these well-balanced Mortise Chisels are ground with parallel sides and are thicker than they are wide to help keep them straight in the cut. Made of A2 Tool Steel, hardened to Rockwell 60-62, cryogenically treated and double tempered. Maine-harvested Hornbeam handles. Overall length is approximately 10.5". The bevel is ground sharp at 30º, but a higher secondary...
£135.00 inc VAT

Henry Taylor Registered Mortice ChiselHenry Taylor Registered Mortice Chisel
Henry Taylor Registered Mortice Chisel
Made in Sheffield, England for over 150 years. Blade about 5½" long. F23 - 1/4" (6mm) F24a - 3/8" (9mm) F24 - 1/2" (12mm) F25 - 3/4" (19mm) F26 - 1" (25mm)
from £25.20 inc VAT
Narex Mortice Chisels - Set of 4Narex Mortice Chisels - Set of 4
Narex Mortice Chisels - Set of 4
Robust mortice chisels for chopping out joints and cutting mortices. Sides taper in height and length from tip to shoulder for sidewall clearance. Bulky handle made from hornbeam which is strong enough to withstand heavy blows with a mallet. Overall length 304mm. Available as a boxed set of 4 (4mm, 6mm, 10mm and 12mm).
£66.00 inc VAT

Henry Taylor Registered Mortice Chisel Set of 5Henry Taylor Registered Mortice Chisel Set of 5
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years. Blade about 5½" long. F23 - 1/4" (6mm) F24a - 3/8" (9mm) F24 - 1/2" (12mm) F25 - 3/4" (19mm) F26 - 1" (25mm)
£138.00 inc VAT
Henry Taylor Firmer ChiselsHenry Taylor Firmer Chisels
from £24.60 inc VAT

Henry Taylor Heavy Duty Socket Firmer ChiselsHenry Taylor Heavy Duty Socket Firmer Chisels
Henry Taylor Heavy Duty Socket Firmer Chisels
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
from £69.60 inc VAT
Robert Sorby Double Hooped Registered Chisel
Robert Sorby Double Hooped Registered Chisel
Originally it was thought that registered (or shipwrights chisels) were used by barge builders and they first appeared in the mid 19th century. “strong ship” or registered chisels were also described in the Scottish tool manufacturer Mathieson’s catalogue of 1900. More recently these chisels have become very popular with joiners and timber framers for mortising. The double hoops give...
from £37.07 inc VAT

Henry Taylor Incannel Firmer GougesHenry Taylor Incannel Firmer Gouges
Henry Taylor Incannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. Blade about 4" long. F11 - 1/4" (6mm) F12 - 3/8"...
from £29.10 inc VAT
Henry Taylor Outcannel Firmer GougesHenry Taylor Outcannel Firmer Gouges
Henry Taylor Outcannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. Blade about 4" long. F17 - 1/4" (6mm) F18 - 3/8" (9mm) F19...
from £27.60 inc VAT

Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
£312.00 inc VAT
Henry Taylor Incannel Firmer Gouges Set of 6Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. Blade about 4" long. F11 - 1/4" (6mm) F12 - 3/8"...
£180.00 inc VAT

Henry Taylor Outcannel Firmer Gouges - Set of 6
Henry Taylor Outcannel Firmer Gouges - Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. Blade about 4" long. F17 - 1/4" (6mm) F18 - 3/8" (9mm) F19...
£170.00 inc VAT
Barr Framing ChiselsBarr Framing Chisels
Barr Framing Chisels
Barr's framing chisels have become the first choice of professional timber framers and homebuilders. These chisels will take and hold a superior edge saving you time and giving you the best possible results. Hand forged from carbon steel with a flat back and socket handle, they are a must for mortise and tenon work. The chisels are all 17½" (438mm) long overall. Available as 1" (25mm), 1½" (38mm),...
£195.00 inc VAT

Robert Sorby Framing Chisel
Robert Sorby Framing Chisel
The Robert Sorby Framing Chisel is the same principle as their registered chisel but with a longer blade and handle for deeper morticing work. Overall Size:- 495mm Blade Length:- 267mm
from £63.90 inc VAT
Robert Sorby Bevel Edged Framing Chisel
Robert Sorby Bevel Edged Framing Chisel
Very similar to the RS285 framing chisel that the blade is beveled to give extra clearance in the cut. Tapered along the length. Ash handle. Shorter than the RS285 - 388mm overall length.
from £84.15 inc VAT
Page: 1 | 2 |