Sort By
Per Page
View
Grid
List
Hock Bench Plane Blades
Ron Hock has earned an international reputation for the quality of his plane blades. Ron incorporates the same basic principles as used by 19th Century edge tools makers in his high carbon steel blades and updates these principles in his A2 cryogenically treated steel.
High carbon steel blades are easier to sharpen and will give you a fantastic cuting edge. However they will require more frequent...
Hock Chipbreakers
To maximize your plane's performance, a thicker chip breaker (cap iron) can stabilize the blade's cutting edge reducing vibration and chatter. HOCK Chip Breakers are 3mm thick (.118"), almost twice as thick as a stock chip breaker and they come with with a knurled cap screw.
Hock Block Plane Blades
Classic Hand Tools offer four block plane blades all of which are 3/32" thick x 4 1/4" long. They will fit Stanley, Record and many other block planes.
Which HOCK blade do I need for my Block Plane?
We offer four different block plane blades in two different alloys.
The first determinant is the blade width, either 1 3/8" or 1 5/8". Check what width of blade you need as...
Hock Metal Spokeshave Blades
Hock Replacement blades for metal spokeshaves (Type 151) - cryogenically treated A2 blades.
Perhaps the most dramatic improvement can be realised by accurizing and tuning your Spokeshave. It is a mediocre tool as it comes from the factory, but with a quality blade and a little fussing, it becomes a versatile and sensitive tool capable of doing fine work. Stanley and Record Style with the dog-bone...
Hock Replacement Blades for Stanley-Style Scraper Planes
The blades for the Stanley No.12 and No.112 Scraper Planes are 3/32" thick by 2-7/8" wide and 5" long with a 45 degree bevel on the cutting edge. Hardened for a balance of long edge life and burr "rollability".
No.80 replacement blade (also fits the Record 080) measures 1/16" X 2-3/4" X 3" long.
No.81 replacement blade measures 1/16" X 2-1/2"...
Hock Wooden Spokeshave Blades
These are the two-threaded-post style carbon steel blades and yes, the brass thumbnuts are included.
The small blade has a 11/2" cutting edge and is 2 1/2" by 7/16" overall.
The larger blade has a 2 3/4" cutting edge and is 4 7/16" x 5/8" overall.
Hock Blade & Chipbreakers for #10 Rebate Plane
To fit a Stanley or Record #10 rebate plane. 2 1/8'' wide cutting edge.
Ron Hock has earned an international reputation for the quality of his plane blades. Ron incorporates the same basic principles as used by 19th Century edge tools makers in his high carbon steel blades.
High carbon steel blades are easier to sharpen and will give you a fantastic cuting edge. However they will require...
Hock 4 1/2'' Straight-Edge Krenov-Style Plane Assemblies
We have always stocked the 3½" length blade but now have the 4½" available too.
Hock 3 1/2'' Radius-Edge Krenov-Style Plane Assemblies
These Ron Hock blades were developed in collaboration with James Krenov's Fine-Woodworking studio in Fort Bragg.
They are 3/16" thick, they won't deflect or chatter under the toughest use.
The are designed specifically for the finely tuned handmade wooden planes. The bevel is 30° and they come complete with chip-breaker and assembly screw.
Made from high carbon steel.
Hock Woodworking Plane Kit
Ron Hock's precision made kit provides a quick, sure way to realize the satisfaction of using a handmade wooden plane. Complete with a HOCK PLANE-IRON ASSEMBLY all you need is a drill, some clamps, glue, a knife to adjust the throat, sandpaper (or plane) to true the sole, and a means of sharpening the iron.
A HOCK plane kit is ideal for the novice as well as the professional woodworker who can't...
Hock Block Plane Kit
Here Ron Hock offers a small version of their ever-popular Krenov-style wooden plane kit. This handy Block Plane comes with a 1" wide blade, ends up 5¾" long and trims down to 5" or less depending on your needs. Jatoba body.
Hock Shoulder Plane Kit
The Shoulder Plane Kit is precision-made from beech and jatoba for beauty, performance and durability. This easy-to-assemble kit requires a only drill (for the locator dowels), some glue and clamps, and some fine tuning and shaping to complete. The bevel-down blade is bedded at 37.5° for low-angle end-grain planing of shoulders. 3/4" Tee Blade (#SH075) is included.
Hock Scraper Plane Kit
The Ron Hock Scraper Plane Kits are precision-made from jatoba. The O1 Hock blade is bedded at 95° and hardened to Rc58 for burr "rollability".
The parts are taller than their Krenov-style Plane Kit to allow for necessary blade access and a comfortable grip.
1 3/4" Iron Width x 11" Finished Length
Hock Spokeshave Kit
Ron Hock has done all the cutting for their jatoba Spokeshave Kit - you just have to glue in the brass wear-strip and shape the handles to suit your hands. All the parts are included: depth-adjuster set screws, brass thumb screws to secure the blade and a HOCK blade (SP062S).
A fun, simple and affordable way to add a wooden spokeshave to your tool chest.
Hock 1 1/4'' Carving Knife
This Carving Knife is a general purpose carving knife and the rounded point is very durable. A great knife suitable for beginners.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Hock 1 1/4'' Detail Knife
A Detail Knife has a very fine point for making the very narrow cuts associated with detailing. The straight blade accommodates larger stock removal if needed.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Hock 1 1/4'' Stab Knife
The Stab Knife is used for taking more vertical cuts where space is limited for a conventional whittling stroke. This knife can also be referred to as a Skew Knife.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Hock 1' Carving Knife
This Carving Knife is a general purpose carving knife and the rounded point is very durable. A great knife suitable for beginners.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Hock 1' Chip Carver Knife
A traditional Chip Carving Knife is a short-bladed knife used to make triangular shaped cuts to create intricate designs in wood. Designs carved in this fashion are cut into the wood or incised, not relieved.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Hock Carving Knives - Set of 5
The blades of these comfortable carving knives are made from Hock's high carbon steel, hardened to Rc62 (if that sounds familiar it's because that's the same steel and hardness as Hock's high-carbon knives and plane blades) easy to hone to the sharpest possible edge.
The lengths listed are an approximate blade length.
The set includes: 1" Carving Knife, 1¼" Carving Knife, 1" Chip Carver Knife,...
Hock Marking Knife Blades
This right or left hand, spear point marking knives (bevels are on one side only) are perfect for scribing fine lines against a straight edge.
High carbon steel. All steel knife.
Hock Violin Knife Blades
Three sizes of knife blade as suggested by the late master violin-maker, Hans Weisshaar. These knives are double beveled. Sold as blades only, no handles.
High carbon steel.
Hock High Carbon 3 1/2'' Paring Knife Kit
Ron Hock kit to create Paring Knife with a 3½" blade which is 1/8" thick - sold without handles and include 3 steel pins.
General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is O1...
Hock High Carbon 5'' Chef's Knife Kit
Ron Hock High Carbon kit to create a Chef's Knife with a 5" blade , 1/8" thick - sold without handles and include 3 steel pins.
General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is...
Hock High Carbon 8'' Chef's Knife Kit
A kit by Ron Hock to create a Chef's Knife with a 8" blade. 1/8" thick - sold without handles and include 3 steel pins.
General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is O1 tool...
Hock High Carbon 8'' Slicing/Carving Knife Kit
Ron Hock kit to create a Slicing/Carving Knife with 8" blade, 1/8" thick - sold without handles and include 3 steel pins.
General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is O1 tool...
Hock Burnishers
Hock burnishers are hardened (Rc64) and polished high carbon tool-steel rods that stand up well to constant use on scraper edges. Most others are not hard enough for this demanding application.
Needs to be handled.
Size: 3/8" x 6
Hock Scratch Stock
Ron Hock Scratch Stocks are made from tough, wear-resistant bamboo plywood. Two spring steel blades are included, one of which has a quirk-bead shape cut into it, to get you started using your Scratch Stock with no more than final honing. Other shapes are up to your imagination and are cut into the blades with files and slipstones.
The body measures 3/4" x 1-1/2" x 4-3/4", the blue-tempered...
