Chris Pye 17 Piece Basic Woodcarving Set
Chris Pye 17 Piece Basic Woodcarving Set
The set of 17 includes the following: Straight Gouges #3 - 5mm (3/16") #3 - 8mm (5/16") #6 - 5mm (3/16") #6 - 8mm (5/16") #9 - 5mm (3/16") #9 - 8mm (5/16") Skew Chisel - 10mm (3/8") 60 deg. V tool - 10mm (3/8") Allongee Gouges #3 - 14mm (1/2") #3 - 20mm (3/4") #3 - 26mm (1 1/32") #6 - 14mm (1/2") #6 - 20mm (3/4") #6...

5

£735.00 inc VAT
Saburrtooth 1/4' Cross Cutter 1'
Saburrtooth 1/4' Cross Cutter 1'
Shape: Cross Cut Eyecutter Diameter: 1'' Head Length: 1"
£47.00 inc VAT

Saburrtooth 1/4'' Ball Nose - 1/2'' x 2'Saburrtooth 1/4'' Ball Nose - 1/2'' x 2'
Saburrtooth 1/4'' Ball Nose - 1/2'' x 2'
Saburrtooth 1/4" Ball Nose - 1/2" x 2" is available in extra fine (whisper white), fine (yellow), coarse (green) and extra coarse (orange). Head Diameter: 1/2" Head Length: 2"
£27.25 inc VAT
Saburrtooth 1/8'  Burrs Spoon Carving Set
Saburrtooth 1/8' Burrs Spoon Carving Set
This Saburrtooth spoon carving set includes the following: 18BN14 1/8" Ball Nose 1/4" - Whispers (extra fine) 18F38 1/8" Flame 3/8" - Whispers (extra fine) 18RS58 1/8" Rotosaw 5/8" - Coarse 18DT38 1/8" Dove Tail 3/8" - Coarse
£64.00 inc VAT

Saburrtooth 6mm Ball Nose - 1/2' x 2'Saburrtooth 6mm Ball Nose - 1/2' x 2'
Last Ones!
Saburrtooth 6mm Ball Nose - 1/2' x 2'
Head Diameter: 1/2" Head Length: 2"
£30.00 inc VAT
Saburrtooth 6mm Ball Nose - 1/2' x 3/4''Saburrtooth 6mm Ball Nose - 1/2' x 3/4''
Last Ones!
Saburrtooth 6mm Ball Nose - 1/2' x 3/4''
Head Diameter: 1/2" Head Length: 3/4"
£19.80 inc VAT

Saburrtooth 6mm Ball Nose - 1/4'' x 1''Saburrtooth 6mm Ball Nose - 1/4'' x 1''
Last Ones!
Saburrtooth 6mm Ball Nose - 1/4'' x 1''
Head Diameter: ¼" Head Length: 1"
£19.80 inc VAT
Saburrtooth 6mm Ball Nose - 3/4' x 1''Saburrtooth 6mm Ball Nose - 3/4' x 1''
Last Ones!
Saburrtooth 6mm Ball Nose - 3/4' x 1''
Head Diameter: 3/4" Head Length: 1"
£23.50 inc VAT

Saburrtooth 6mm Ball Nose - 5/8' x 3/4''Saburrtooth 6mm Ball Nose - 5/8' x 3/4''
Last Ones!
Saburrtooth 6mm Ball Nose - 5/8' x 3/4''
Head Diameter: 5/8" Head Length: 3/4"
£19.80 inc VAT
Saburrtooth 6mm Cylinder - 1' x 1' - (Radius End)Saburrtooth 6mm Cylinder - 1' x 1' - (Radius End)
Last Ones!
Saburrtooth 6mm Cylinder - 1' x 1' - (Radius End)
Head Diameter: 1" Head Length: 1"
£23.50 inc VAT

Saburrtooth 6mm Cylinder - 1' x 1' - (Smooth End)Saburrtooth 6mm Cylinder - 1' x 1' - (Smooth End)
Last Ones!
Saburrtooth 6mm Cylinder - 1' x 1' - (Smooth End)
Head Diameter: 1" Head Length: 1"
£19.80 inc VAT
Saburrtooth 6mm Cylinder - 1/2' x 1/2''Saburrtooth 6mm Cylinder - 1/2' x 1/2''
Last Ones!
Saburrtooth 6mm Cylinder - 1/2' x 1/2''
Head Diameter: 1/2" Head Length: 1/2"
£19.80 inc VAT

Saburrtooth 6mm Cylinder - 1/2' x 3/4' - (Smooth End)Saburrtooth 6mm Cylinder - 1/2' x 3/4' - (Smooth End)
Last Ones!
Saburrtooth 6mm Cylinder - 1/2' x 3/4' - (Smooth End)
Head Diameter: 1/2" Head Length: 3/4"
£19.80 inc VAT
Saburrtooth 6mm Cylinder - 1/4'' x 1''Saburrtooth 6mm Cylinder - 1/4'' x 1''
Last Ones!
Saburrtooth 6mm Cylinder - 1/4'' x 1''
Head Diameter: ¼" Head Length: 1"
£19.80 inc VAT

Saburrtooth 6mm Cylinder - 1/4'' x 1'' (Smooth End)Saburrtooth 6mm Cylinder - 1/4'' x 1'' (Smooth End)
Last Ones!
Saburrtooth 6mm Cylinder - 1/4'' x 1'' (Smooth End)
Head Diameter: ¼" Head Length: 1"
£19.80 inc VAT
Saburrtooth 6mm Cylinder - 3/4' x 1' - (Smooth End)Saburrtooth 6mm Cylinder - 3/4' x 1' - (Smooth End)
Last Ones!
Saburrtooth 6mm Cylinder - 3/4' x 1' - (Smooth End)
Head Diameter: 3/4" Head Length: 1"
£22.50 inc VAT

Saburrtooth 6mm Cylinder - 3/4' x 1''Saburrtooth 6mm Cylinder - 3/4' x 1''
Last Ones!
Saburrtooth 6mm Cylinder - 3/4' x 1''
Head Diameter: 3/4" Head Length: 1"
£22.50 inc VAT
Saburrtooth 6mm Dove Tail - 3/4' x 1' - (Smooth End)Saburrtooth 6mm Dove Tail - 3/4' x 1' - (Smooth End)
Last Ones!
Saburrtooth 6mm Dove Tail - 3/4' x 1' - (Smooth End)
Head Diameter: 3/4" Head Length: 1"
£23.50 inc VAT

Saburrtooth 6mm Dove Tail - 3/4' x 1''Saburrtooth 6mm Dove Tail - 3/4' x 1''
Last Ones!
Saburrtooth 6mm Dove Tail - 3/4' x 1''
Head Diameter: 3/4" Head Length: 1"
£23.50 inc VAT
Saburrtooth 6mm Flame - 1/2' x 3/4''Saburrtooth 6mm Flame - 1/2' x 3/4''
Last Ones!
Saburrtooth 6mm Flame - 1/2' x 3/4''
Head Diameter: 1/2" Head Length: 3/4"
£19.80 inc VAT

Saburrtooth 6mm Flame - 3/4' x 1''Saburrtooth 6mm Flame - 3/4' x 1''
Last Ones!
Saburrtooth 6mm Flame - 3/4' x 1''
Head Diameter: 3/4" Head Length: 1"
£23.50 inc VAT
Saburrtooth 6mm Flame - 3/8' x 3/4''Saburrtooth 6mm Flame - 3/8' x 3/4''
Last Ones!
Saburrtooth 6mm Flame - 3/8' x 3/4''
Head Diameter: 3/8" Head Length: 3/4"
£19.80 inc VAT

Saburrtooth 6mm Rotosaw - 1 1/4'' x 1/4''Saburrtooth 6mm Rotosaw - 1 1/4'' x 1/4''
Last Ones!
Saburrtooth 6mm Rotosaw - 1 1/4'' x 1/4''
Head Diameter: 1¼" Head Length: ¼"
£21.25 inc VAT
Saburrtooth 6mm Rotosaw - 1'' x 1/4''Saburrtooth 6mm Rotosaw - 1'' x 1/4''
Last Ones!
Saburrtooth 6mm Rotosaw - 1'' x 1/4''
Head Diameter: 1" Head Length: ¼"
£19.80 inc VAT

Saburrtooth 6mm Rotosaw - 2'' x 1/4''Saburrtooth 6mm Rotosaw - 2'' x 1/4''
Last Ones!
Saburrtooth 6mm Rotosaw - 2'' x 1/4''
Head Diameter: 2" Head Length: ¼"
£29.50 inc VAT
Saburrtooth 6mm Rotosaw - 3/4' x 1/4Saburrtooth 6mm Rotosaw - 3/4' x 1/4
Last Ones!
Saburrtooth 6mm Rotosaw - 3/4' x 1/4
Head Diameter: 3/4" Head Length: 1/4"
£19.80 inc VAT

Saburrtooth 6mm Sphere - 1' x 1Saburrtooth 6mm Sphere - 1' x 1
Last Ones!
Saburrtooth 6mm Sphere - 1' x 1
Head Diameter: 1" Head Length: 1"
£24.50 inc VAT
Saburrtooth 6mm Sphere - 1/2' x 1/2''Saburrtooth 6mm Sphere - 1/2' x 1/2''
Last Ones!
Saburrtooth 6mm Sphere - 1/2' x 1/2''
Head Diameter: 1/2" Head Length: 1/2"
£19.80 inc VAT

Saburrtooth 6mm Sphere - 5/8' x 5/8''Saburrtooth 6mm Sphere - 5/8' x 5/8''
Last Ones!
Saburrtooth 6mm Sphere - 5/8' x 5/8''
Head Diameter: 5/8" Head Length: 5/8"
£21.25 inc VAT
Saburrtooth 6mm Taper - 1/2' x 1' - (Smooth End)Saburrtooth 6mm Taper - 1/2' x 1' - (Smooth End)
Last Ones!
Saburrtooth 6mm Taper - 1/2' x 1' - (Smooth End)
Head Diameter: 1/2" Head Length: 1"
£19.80 inc VAT

Saburrtooth 6mm Taper - 1/2' x 1''Saburrtooth 6mm Taper - 1/2' x 1''
Last Ones!
Saburrtooth 6mm Taper - 1/2' x 1''
Head Diameter: 1/2" Head Length: 1"
£19.80 inc VAT
Saburrtooth 6mm Taper - 1/4'' x 1 3/8''Saburrtooth 6mm Taper - 1/4'' x 1 3/8''
Last Ones!
Saburrtooth 6mm Taper - 1/4'' x 1 3/8''
Head Diameter: 1/4" Head Length: 1 3/8"
£19.80 inc VAT

Saburrtooth 6mm Taper - 3/4' x 1''Saburrtooth 6mm Taper - 3/4' x 1''
Last Ones!
Saburrtooth 6mm Taper - 3/4' x 1''
Head Diameter: 3/4" Head Length: 1"
£22.50 inc VAT
Tormek Adjustable Tool Rest
Tormek Adjustable Tool Rest
With the Tormek Adjustable Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools. It has a generous surface, 90 × 110mm, which permits a safe and steady positioning of the tool towards the stone. The...
£33.00 inc VAT

Tormek AngleMaster
Tormek AngleMaster
The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool. The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone diameter from 250 mm or 10" down to 150 mm or 6", so you can achieve an exact setting even as the stone wears.
£24.75 inc VAT
Tormek Anti-Corrosion Concentrate (2 Pack)
Tormek Anti-Corrosion Concentrate (2 Pack)
The Tormek Anti-Corrosion Concentrate makes water non-corrosive. Always use with Tormek diamond wheels. It can also be used with grindstones. Add 10ml concentrate to 250ml water (~4%). Scale for correct dilution. Mix Anti-Corrosion Concentrate and water before adding to water trough. If you want to save the mix overnight, remember to lower the water trough. Does not contain anti-freeze. Each...
£38.50 inc VAT

Tormek AWT-250 Advanced Water TroughTormek AWT-250 Advanced Water Trough
Tormek AWT-250 Advanced Water Trough
The Tormek Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools. Magnet Cleans the Stone The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone...
£29.00 inc VAT
Tormek Axe Jig
Tormek Axe Jig
With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.
£16.85 inc VAT

Tormek Bench Grinder Kit
Tormek Bench Grinder Kit
A package deal comprising the Tormek BGM-100, Tormek SVS-50 Multi-Jig, Tormek TTS-100 Turning Tool Setter and the Tormek SVD-186 Turning Tool Jig. Tormek BGM-100 With the BGM-100 you can use Tormek jigs and setting devices on your bench grinder, giving you perfect control. The chosen shape and edge angle are precisely repeatable. The BGM-100 also allows the use of other Tormek woodturner's...
£235.00 inc VAT
Tormek Bench Grinder Mounting Set
Tormek Bench Grinder Mounting Set
If you need to remove a lot of steel to create a desired shape on a new tool, this Tormek Bench Grinder Mounting Set BGM-100 enables you to use the Tormek woodturning jigs also on your bench grinder. Take control of your profiles No matter which grinding machine you use, the most difficult part in sharpening woodturning tools is to exactly replicate the shape and the edge angle. With the BGM-100...
£87.75 inc VAT

Tormek Centring Knife JigTormek Centring Knife Jig
Tormek Centring Knife Jig
With Tormek's patented KJ-45 Centreing Knife Jig, you'll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thicker, tapered hunting knife, you'll get the same results on both bevels of the knife without needing to reset the jig. The KJ-45 Centreing Knife...

5

£45.00 inc VAT
Tormek CW-220 Composite Honing Wheel
Tormek CW-220 Composite Honing Wheel
The Tormek Composite Honing Wheel has integrated polish to remove the burr and is easy to use. This wheel fits Tormek T-8, Tormek T-7 and Tormek 2000. The Composite Honing Wheel is suitable to use in clean environments since there's no need to add honing compound. Tip when honing Moisten the composite honing wheel with some water for smoother honing. Use a sponge or cloth.
£84.50 inc VAT

Tormek DC-200 Diamond Wheel Coarse 360G
Tormek DC-200 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft. Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate in the water when sharpening...
£206.00 inc VAT
Tormek DC-250 Diamond Wheel Coarse 360G
Tormek DC-250 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter. Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate...
£273.00 inc VAT

Tormek DE-200 Diamond Wheel Extra Fine 1200G
Tormek DE-200 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft. Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
£195.00 inc VAT
Tormek DE-250 Diamond Wheel Extra Fine 1200G
Tormek DE-250 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter. Included with every diamond wheel is a bottle of Tormek...
£256.00 inc VAT

Tormek DF-200 Diamond Wheel Fine 600G
Tormek DF-200 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft. Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
£191.00 inc VAT
Tormek DF-250 Diamond Wheel Fine 600G
Tormek DF-250 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel. You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter. Included with every diamond wheel is a bottle of Tormek...
£256.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last