Sort By
Per Page
View
Grid
List
Pfeil Series 1 - Double Bevel Chisel
These are straight chisels with a double bevel. Straight chisels are used to carve the blank into rough form and to work on large areas.
Henry Taylor No.1 Allongee Chisels
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) double bevelled blade. Fitted with an octagonal beech handle and brass ferrules. These tools widen progressively from the bolster. This helps with visibility around the tool and reduces the chances of damaging the foreground. Very popular for letter carving.
A copy of the Henry Taylor...
Pfeil Series 1e - Single Bevel Chisel
These are straight chisels with a single bevel. Like Series 1 chisels, these chisels are used to carve the blank into rough form and to work on large areas. Single bevel. The choice of single or double bevel is largely a matter of preference.
Pfeil Series 1S - Double Bevel Skew Chisel
These are double bevelled skew chisels. The edge is slightly skewed for easy cutting action; often used without a mallet. Removes neat shavings. Double bevel – so the chisel can be used with the skew to the right or left. Useful for carving lettering and ornamental forms.
Pfeil Series 1Se - Single Bevel Skew Chisel
These are single bevelled skew chisels. Like No. 1, these chisels are used to carve the blank into rough form and to work on large areas. Single bevel. The choice of single or double bevel is largely a matter of preference.
Henry Taylor No.1 Straight Chisels
From the 'Professional' range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version for...
Henry Taylor No.2 Skew Chisels
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version for...
.png "Last Ones!")
Henry Taylor No.1 Fishtail Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor...
Pfeil Series 1a - Spoon Bent Chisel
For shaping recesses and working in corners.
Henry Taylor No.1 Spoon Bent Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
Pfeil Series 21 - Dog Leg Chisels
Dog leg chisels are used for finishing rectangular depressions.
Auriou Double Bevel Lettering Chisels
This range of double bevel lettering chisels forms the backbone of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link.
These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France.
The chisels are allongee chisels with a slim blade section. Allongee is a style of blade...
Auriou Double Bevel Fishtail Chisel - 14mm (9/16")
This Auriou Double Bevel Fisthail Chisel - 14mm (9/16") forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link.
These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France.
Auriou woodcarving tools have been among Chris Pye's favourite tools since...
Auriou Straight Skew Chisel - 10mm (13/32")
This Auriou Straight Chisel forms part of the Chris Pye's selection of "Basic" carving tools. To view more tools from these ranges please follow this link.
The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools you'll have the means...
Henry Taylor Left Skew Spoon Bent Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
Henry Taylor Right Skew Spoon Bent Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
Pfeil Straight Gouge - Series 2
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 3
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 4
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 5
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 6
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 7
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Series 7 and 8 sweeps are particularly useful for finishing work.
Pfeil Straight Gouge - Series 8
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. The broad range of sweeps and widths offered by Pfeil opens unlimited possibilities in sculpture carving.
Series 7 and 8 sweeps are particularly useful for finishing work.
Paul Adamson recommends the 25mm tool for making a Kuksa, his book can be viewed here
Pfeil Straight Gouge - Series 9
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 11
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Series 11 are the narrowest and are ideal for carving fine details like hair.
Henry Taylor No.3 Straight Gouges
From the 'Professional' range of Henry Taylor carving tools. These gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version for illustration...
Henry Taylor No.5 Straight Gouges
From the "Professional" range of Henry Taylor carving tools. These gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version for...
Henry Taylor No.7 Straight Gouges
From the 'Professional' range of Henry Taylor carving tools. These gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version for illustration...
Henry Taylor No.9 Straight Gouges
From the 'Professional' range of Henry Taylor carving tools. These gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version for illustration...
Henry Taylor No.11 Straight Gouges
From the 'Professional' range of Henry Taylor carving tools. These gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version for illustration...
Henry Taylor Veining Tools
From the "Professional" range of Henry Taylor carving tools. These veining tools are deep narrow gouges used for cutting in fine lines, for lettering and adding detail. They have a 5" (130mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Auriou Straight Gouge Series No.3
These Auriou Straight Gouges Series No.3 form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from these ranges please follow this link.
The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools you'll...
Auriou Straight Gouge Series No.5 - 11mm (7/16")
This Auriou Series No.5 - 11mm (7/16") Straight Gouge forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link.
These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France.
Auriou woodcarving tools have been among Chris Pye's favourite tools since...
Auriou Straight Gouge Series No.6
These Auriou Straight Gouges form part of the Chris Pye's selection of "Basic" and Letter Carving Tools carving tools. To view more tools from these ranges please follow this link.
The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
Auriou Straight Gouge Series No.9
These Auriou Straight Gouges form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from this ''Basic'' range please follow this link.
The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
Pfeil Series 12 - 60° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
60°
Pfeil Series 13 - 90° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
90°
Pfeil Series 14 - 55° Soft V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
55°
Pfeil Series 15 - 45° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
45°
Pfeil Series 16 - 35° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
35°
Pfeil Long Bent 60° V Tool - Series 12L
For shaping recesses and working in corners.
Henry Taylor No.39 60° 'V' Parting Tools
From the 'Professional' range of Henry Taylor carving tools. These parting tools have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version...
Henry Taylor 60° Spoon Bent 'V' Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These parting tools have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
