Category
Brand
Collection
Price
Additional Filters
414 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Lie Nielsen Toolworks – Bronze No. 4 Smoothing Plane [Preowned, SOLD]Lie Nielsen Toolworks – Bronze No. 4 Smoothing Plane [Preowned, SOLD]
Sold
Lie Nielsen Toolworks – Bronze No. 4 Smoothing Plane [Preowned, SOLD]
This is a pre-owned bronze LN No.4 in good ++ (G++) condition. Look here to see what we say about the brand-new version (which retails for £595) on our main LN section. This Lie-Nielsen's smoothing plane has a manganese bronze casting and has a beautifully formed handle and knob. It has the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body....
£445.00 inc VAT
Veritas Miniature Shoulder Plane [Preowned, SOLD]Veritas Miniature Shoulder Plane [Preowned, SOLD]
Sold
Veritas Miniature Shoulder Plane [Preowned, SOLD]
Please make sure you know how small this beauty is before you buy! Pre-owned but in fine (F) condition in original packaging. Weighing a mere 1.7 oz and measuring 2-1/2" long by 1/4" wide, this miniature version of the Veritas medium shoulder plane was developed out of a desire to test the limitations of their materials, design, and manufacturing processes (not to mention the patience...
£36.00 inc VAT
Veritas Metric Set Up Blocks - 9 piece set [Preowned, SOLD]Veritas Metric Set Up Blocks - 9 piece set [Preowned, SOLD]
Sold
Veritas Metric Set Up Blocks - 9 piece set [Preowned, SOLD]
The description from our main Veritas Section, where this retails new for £57.45 “Setting up machines in the shop can be a frustrating and inaccurate undertaking. Tape measures and rulers are difficult to use when measuring gaps between curved bits and guide fences. Worse, machines often require two hands to adjust, leaving nothing to hold the measuring tool. The Veritas set-up blocks...
£42.00 inc VAT
Record 405 Multiplane [Preowned]Record 405 Multiplane [Preowned]
Sold
Record 405 Multiplane [Preowned]
This plane has seen very little use at all and presents as almost new. It has its fitted box with wallet containing 24 cutters and instruction booklet. The cutters: 4, 6, 9 & 12mm plus 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 5/8'', 3/4'' & 7/8'' Plough & Dado cutters. 1/8'',...
£185.00 inc VAT
Lee Valley Winding Sticks 24” [Preowned]Lee Valley Winding Sticks 24” [Preowned]
Sold
Lee Valley Winding Sticks 24” [Preowned]
This is the description from the main section of our website. “Winding sticks are not new; woodworkers have been making them for years from scrap wood and using them to check the flatness of material. Placed at opposite ends of a board, they accentuate any twist (wind), making it easier to identify and correct. With the sticks in place, sight across their top edges. If the edges are parallel,...
£24.00 inc VAT
Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned]Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned]
Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned]
Pre-owned but in superb condition this plane has the considerable advantage of having been fitted with a Clifton hand forged blade and 2 piece cap iron. This plane has done very little planing. 21” overall with 2 3/8” wide blade. Stained beech handles. This plane is quite recent. Made in England.
£125.00 inc VAT
Flexcut – 3 Special Edition Forged Carving Knives [Clearance]
Flexcut – 3 Special Edition Forged Carving Knives [Clearance]
Upsweep, Detail & Cutting Knives KN201, KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 3 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall. High carbon drop forged blade edges, the cutting and...
£72.00 inc VAT
Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance]
Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance]
Upsweep & Cutting Knives KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 2 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge each measuring approximately...
£50.00 inc VAT
Flexcut – Special Edition Forged Upsweep Knife KN203 [Clearance]
Flexcut – Special Edition Forged Upsweep Knife KN203 [Clearance]
New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...
£25.00 inc VAT
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...
£25.00 inc VAT
7 Pneumatic Stone Carving Tools - Auriou [Clearance]7 Pneumatic Stone Carving Tools - Auriou [Clearance]
7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...
£108.00 inc VAT
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]
Special Offer
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane. Toothed blades have small chisel-like teeth .030'' (.762mm) wide and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set smoothing plane ideally purchased through Classic Hand Tools. The blade comes with a 25° flat ground bevel; it sits in the tool at...
£60.00 (VAT exempt)
Woodworking Starter Set [Preowned]Woodworking Starter Set [Preowned]
Woodworking Starter Set [Preowned]
Get yourself (or someone else started!) A Brass & Rosewood mortise gauge A Brass and rosewood 4'' square (Crown Tools) A Brass and rosewood 8'' bevel with lever lock. 3 bevel edged chisels: 3/8'' Marples 5/8'' Marples 1/2'' Ashley Iles A Record 4½ smoothing plane – that has seen little, if any, use. Stained beech...
£135.00 (VAT exempt)
Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned]Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned]
Special Offer
Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned]
A bespoke made rip cut 11tpi tenon saw with lovely walnut handle. This saw was made by Thomas Flinn & Co., saw and tool makers in Sheffield, England. This closed walnut handled LYNX tenon saw is 14'' (350mm) long. This heavy brass backed tenon saw is in G++ condition having been well cared for during its use. The steel plate is 3 1/8'' deep, a heavy brass back with...
£85.00 (VAT exempt)
Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New]Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New]
Special Offer
Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New]
This is a good deal for these chisels from Lie-Nielsen Toolworks USA They are unused, as new in original packaging. Widths - ¼'', 3/8'', ½'', ¾'' & 1'' Each box stamped April 2023 Possibly the best ''deal'' on Friday Finds! Save yourself a few hard-earned pounds (currently selling for £490 in our main...
£450.00 (VAT exempt)
Benchcrafted Classic Leg Vice & Criss Cross Solo Package [Preowned, As New]Benchcrafted Classic Leg Vice & Criss Cross Solo Package [Preowned, As New]
Revised
Benchcrafted Classic Leg Vice & Criss Cross Solo Package [Preowned, As New]
Benchcrafted Classic Leg Vice & Criss Cross Solo Package A commission sale – unused, as new. This is what we say about these components for bench building on our main site. In the 19th and early 20th century, many vocational schools and commercial shops in France and its colonies were outfitted with Roubo-style benches and metal leg vice hardware. French hardware is typically made...
£360.00 (VAT exempt)
Gifkins A10 Dovetail Jig [Preowned, As New]Gifkins A10 Dovetail Jig [Preowned, As New]
Revised
Gifkins A10 Dovetail Jig [Preowned, As New]
Unused. A commission sale. The A10 Gifkins Box Maker's Dovetail Jig. The Gifkins Dovetail Jig is ideal for boxes, drawers and other small pieces requiring clean, accurate, through-cut dovetail joints. After the initial setup, there is no need to make a trial joint every time you use the jig. Once adjusted, the Gifkins Box Makers Dovetail Jig always gives you exactly the same fit, no matter...
£270.00 (VAT exempt)
Gifkins F5 Finger Jig [Preowned, As New]Gifkins F5 Finger Jig [Preowned, As New]
Revised
Gifkins F5 Finger Jig [Preowned, As New]
Pre-owned - unused. A commission sale. The F5 template cuts a joint with delicate 5 mm fingers, and is fully adjustable, maintaining the quality and accuracy that is synonymous with products from Gifkins product range. The template uses a specially designed solid carbide cutter and will handle any thickness up to a maximum of 13 mm. As with dovetailing, the finger joints are cut on a table mounted...
£160.00 (VAT exempt)
Philip Marcou - Smoothing Plane [Preowned]Philip Marcou - Smoothing Plane [Preowned]
Sold
Philip Marcou - Smoothing Plane [Preowned]
Offers are invited in the region of £2500 for this fabulous plane.  Email sales@classichandtools.com or call 01473 784983 to discuss
£2,500.00 (VAT exempt)
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Special Offer
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...
£395.00 (VAT exempt)
5 Tasai Bench Chisels [Preowned]5 Tasai Bench Chisels [Preowned]
Special Offer
5 Tasai Bench Chisels [Preowned]
These are pre-owned bevel edged bench chisels from the forge of master blacksmith Akio Tasai in Japan. A commission sale. They have been used very sparingly; the hoops have been struck and there are burrs to be attended to in order to safeguard your fingers but that is a quick and easy job. The chisels and box are in G++ condition. Laminated steel with single hollows. The cutting edge is blue...
£945.00 inc VAT
Veritas Medium Shoulder Plane [Preowned]Veritas Medium Shoulder Plane [Preowned]
Revised
Veritas Medium Shoulder Plane [Preowned]
Little used with full iron. Cosmetic scratches and marks. G++ condition. A commission sale. This is Veritas' description for this plane.. ''The shoulder plane (a specialized rebate plane) is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for trimming the shoulder of a tenon to perfection or for rebating work. The Veritas® medium shoulder...
£165.00 (VAT exempt)
Incra Stainless Steel Metric Rule Set [Preowned]Incra Stainless Steel Metric Rule Set [Preowned]
Special Offer
Incra Stainless Steel Metric Rule Set [Preowned]
300mm, 150mm & 75mm long. These super slim Incra rules are extremely precise measuring aids as they have holes for precise marking allowing accuracy to 0.25mm In almost new condition. You’ll need a 0.5mm diameter lead in your pencil to fit the holes.
£42.00 inc VAT
Vintage Squares [Preowned]Vintage Squares [Preowned]
Special Offer
Vintage Squares [Preowned]
All squared up? A selection of attractive vintage squares – all in G+ - G++ condition They probably aren’t super accurate, but they will be good enough for most DIY tasks should you chose to use them. However, cleaning these up (which we haven’t had time to do) will release the beauty of the wood and make the brass glisten like gold. A little bit of wire wool (medium) some...
£36.00 inc VAT
Lie-Nielsen Toolworks - Spare Blade for a No.62 Low Angle Jack Plane [Preowned, As New]Lie-Nielsen Toolworks - Spare Blade for a No.62 Low Angle Jack Plane [Preowned, As New]
Sold
Lie-Nielsen Toolworks - Spare Blade for a No.62 Low Angle Jack Plane [Preowned, As New]
Pre-owned but unused in original wrapping. You wouldn’t know it wasn’t new stock, but it was bought by Classic Hand Tools from a gentleman (amongst a lot of his other fine tools), so it is pre-owned. This is a replacement blade/iron for a Lie Nielsen 62 low angle jack plane. Available new for £71 The blade comes with a 25° flat ground bevel; it sits in the tool at...
£50.00 inc VAT
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
Special Offer
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
New This system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And as a Brucey Bonus RSTM-GT2 Excelsior Detail Point Cutter (titanium nitride)
£125.00 inc VAT
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
Special Offer
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter
£115.00 inc VAT
Robert Sorby TURNMASTER Woodturning System [Clearance]
Special Offer
Robert Sorby TURNMASTER Woodturning System [Clearance]
New "old" tool that we are clearing from our stock due to a summer stock clean. This system (RSTM-SCT3) comes with the single carbide square cutter only. Some more info here from Robert Sorby
£75.00 inc VAT
Robert Sorby Sovereign Ultima Hollowing System – Unhandled Medium 18'' [Clearance]
Special Offer
Robert Sorby Sovereign Ultima Hollowing System – Unhandled Medium 18'' [Clearance]
This is a new tool in that it is Classic Hand Tools’ unsold stock (we are having a summer spring clean!). The video shows you all you need to know but this description may also help. Medium Ultima Unhandled (SOV-RSULTM) A part of Robert Sorby Sovereign System but is also a stand-alone tool when installed in Sovereign handle. The Ultima Blade enables woodturners to produce hollow forms...
£165.00 inc VAT
Woodturning – Robert Sorby Spindle Gouge 1/2'' – Unhandled [Clearance]
Woodturning – Robert Sorby Spindle Gouge 1/2'' – Unhandled [Clearance]
New, walleted surplus stock. These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects. RS840 1/2'' This blade is compatible with The SOVEREIGN SYSTEM
£30.00 inc VAT
Woodturning – Robert Sorby Bowl Gouge 1/2'' – Unhandled [Clearance]
Last Ones!
Woodturning – Robert Sorby Bowl Gouge 1/2'' – Unhandled [Clearance]
New, walleted surplus stock. The fingernail shape of this gouge increases flexibility allowing the turner to perform ‘pull cuts’ without catching the lathe bed. The greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cuts RS 842F 1/2'' This blade is compatible with The SOVEREIGN SYSTEM
£45.00 inc VAT
Woodturning – Robert Sorby Long & Strong Spindle Gouge 3/8'' – Unhandled [Clearance]
Revised
Woodturning – Robert Sorby Long & Strong Spindle Gouge 3/8'' – Unhandled [Clearance]
New, walleted surplus stock. Apart from the length of the blade, these tools are identical to Robert Sorby standard gouges. The increased length of the blades (12'') allows a further reach into the workpiece. This blade is compatible with The SOVEREIGN SYSTEM RS841 3/8''
£34.00 inc VAT
3 Vintage Rabone Measuring Tools - Imperial [Preowned]3 Vintage Rabone Measuring Tools - Imperial [Preowned]
Special Offer
3 Vintage Rabone Measuring Tools - Imperial [Preowned]
A 33 feet Rabone steel tape No.435 - brass winder. A 100 feet Rabone steel tape No.4351 - brass winder. A Rabone No.1377 Boxwood 2 foot 4 fold rule with brass tips and hinge. All are in crisp condition for their age.
£25.00 inc VAT
1/2'' Large Carving Chisel by Flexcut USA [Clearance]1/2'' Large Carving Chisel by Flexcut USA [Clearance]
Last Ones!
1/2'' Large Carving Chisel by Flexcut USA [Clearance]
These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be struck with a mallet when working on large sculptures. But of course, they can be used by hand to shape work without whacking with a mallet as required. Single bevel (underside) Code...
£15.00 inc VAT
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
Last Ones!
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...
£15.00 inc VAT
Karl Holtey 2 1/8'' Plane Blade [Clearance]Karl Holtey 2 1/8'' Plane Blade [Clearance]
Special Offer
Karl Holtey 2 1/8'' Plane Blade [Clearance]
Unused old stock. Stamped HOLTEY. Also stamped “s”. 4” overall. 2 1/8” wide. 3/16” thick. 4 positioning holes.
£60.00 inc VAT
Karl Holtey 2 1/4'' Plane Blade [Clearance]Karl Holtey 2 1/4'' Plane Blade [Clearance]
Special Offer
Karl Holtey 2 1/4'' Plane Blade [Clearance]
Unused old stock. Stamped HOLTEY. Also stamped “2”. 9 1/8” overall. 2 ¼” wide. 3/16” thick. 7 positioning holes.
£75.00 inc VAT
EIGHT Henry Taylor Straight Carving Gouges [Clearance]EIGHT Henry Taylor Straight Carving Gouges [Clearance]
Special Offer
EIGHT Henry Taylor Straight Carving Gouges [Clearance]
New current stock - a straight carving gouge bundle! Ok – we overstocked through our enthusiasm to promote this great British brand and then Henry Taylor slimmed down their overall offering of carving tools, so we decided to concentrate our future investment in woodcarving hand tools in Swiss maker Pfeil and USA maker Flexcut. No crying here but we are trying to get these remaining new tools...
£160.00 inc VAT
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]
Last Ones!
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]
New current stock. A fishtail bundle! Ok – so this is excess stock created through our enthusiasm to promote this great British brand a few years back. We still love these Henry Taylor carving tools but when HT slimmed down their overall offering, we were holding quite a lot (hundreds!) of carving tools. At that point we decided to concentrate our future investment in woodcarving hand tools...
£145.00 inc VAT
Auriou Ironing Rasps – 20mm wide - Unhandled [Clearance]Auriou Ironing Rasps – 20mm wide - Unhandled [Clearance]
Last Ones!
Auriou Ironing Rasps – 20mm wide - Unhandled [Clearance]
Old stock – unhandled – as new. Hand stitched by Auriou Toolworks, the masters of rasp and riffler making in St. Juery, France. These are flat bottomed short ironing rasps. The stitched part is 80mm long and 20mm wide. Stitched on the underside only with a cranked tang for knuckle clearance. Stitch is 6 which is coarse/medium cut. These are “old stock” and date...
£35.00 inc VAT
Eclipse No.34 Butt Gauge [Vintage]Eclipse No.34 Butt Gauge [Vintage]
Last Ones!
Eclipse No.34 Butt Gauge [Vintage]
Good condition, clear markings, and all works freely. Imperial and metric markings.
£15.00 inc VAT
Very Attractive Ebony & Brass Cutting Gauge [Vintage, SOLD]Very Attractive Ebony & Brass Cutting Gauge [Vintage, SOLD]
Sold
Very Attractive Ebony & Brass Cutting Gauge [Vintage, SOLD]
A very attractive cutting gauge with ebony stem and full brass faced ebony fence. G++ condition. We have given this a very light clean, it will polish beautifully but we like the patina so we haven’t gone to town on this! The locking off screw is housed within a brass brass escutcheon. The cutting knife is held in place with a brass wedge. Very nice to handle, it locks firmly...
£65.00 inc VAT
1/2'' Lock Mortise Chisel [Vintage]1/2'' Lock Mortise Chisel [Vintage]
Revised
1/2'' Lock Mortise Chisel [Vintage]
A nice, socketed lock 1/2" wide mortise chisel with oak handle. 21” overall. No markers mark. Very good condition.
£24.00 inc VAT
7 Excellent Paring Gouges – Marples & Ibbotson [Vintage]7 Excellent Paring Gouges – Marples & Ibbotson [Vintage]
Special Offer
7 Excellent Paring Gouges – Marples & Ibbotson [Vintage]
Featuring famous makers from Sheffield, England - William Marples & Sons (5 of the 7) and Thomas Ibbotson (2). Did you know that Marples acquired Thomas Ibbotsons assets in 1905? – nor did we! A mix of long paring gouges with different handle styles and wood species, all with ferrules and virtually no defects (just one very short crack in one handle). A very tactile bunch of gouges. Overall...
£65.00 inc VAT
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Revised
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...
£48.00 inc VAT
Brusso Stainless steel shelf support K-10S [Clearance]Brusso Stainless steel shelf support K-10S [Clearance]
Revised
Brusso Stainless steel shelf support K-10S [Clearance]
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4 – you are buying 2 sets (8 shelf support...
£54.00 inc VAT
Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]
Special Offer
Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]
Pre-owned but these items have seen very little use. The 300mm rule reads from the centre on one edge and left to right on the other edge. Each edge is bevelled. Very crisp white markings at 1mm increments. This rule has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are...
£55.00 inc VAT
Veritas PM-V11 – 2'' Blade [Preowned, As New]Veritas PM-V11 – 2'' Blade [Preowned, As New]
Special Offer
Veritas PM-V11 – 2'' Blade [Preowned, As New]
This is a straight replacement iron for a Veritas No.4 or No.5 ¼ hand plane or can be fitted to Stanley or Record No.4 or No.5 bench planes.. The blade is slightly thicker than the old Record & Stanley planes so some minor adjustment made be necessary to the mouth and the pawl. Pre-owned but appears unused. 1/10” thick. PM-V11 blade. Normally selling for about £62...
£45.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |