Auriou Cabinet Maker's Rasps
Auriou Cabinet Maker's Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE. These are the basic rasps for shaping work. They are relatively wide in proportion to their length giving you considerable cutting power. You will get surprisingly smooth finishes to your work. As a general guide you should chose a rasp which is 3/4 times longer then the width of the piece you are shaping. As an example...
from £99.50 inc VAT
Auriou Modellers Rasps
Auriou Modellers Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE. These are similar to cabinet rasps but are not as wide relative to their length. This allows you to work in tighter spaces. They are for more delicate shaping work and complement the work done by cabinet makers rasps. The 6" (150mm) grain 15 rasp is for making very fine refinements to your work whilst the 7"...
from £85.00 inc VAT

Auriou Roughing Rasp
Auriou Roughing Rasp
This is the 'hog' that reduces your band saw blank to more closely resemble to the shape you want (think cabriole leg, guitar neck, gun stock, decoy duck blanks etc) Flat and half round tapered section, grain 3. the rasp (excluding the handle) is 12" (300mm) long. Available in left or right handed models. The address position for holding your rasp is slightly skewed across the grain (just...
£108.00 inc VAT
Auriou Rat Tail (Tapered Round) Rasps
Auriou Rat Tail (Tapered Round) Rasps
Stitched to the tip! Tapered round rasp. Great for shaping round mortises or for creating a spiral on a goblet stem. Use with twist action to utilise all the teeth. We have a limited number of unhandled rasps at a reduced price, please see list below.
from £67.00 inc VAT

Auriou Albi Combination RaspsAuriou Albi Combination Rasps
Auriou Albi Combination Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE. These are stitched on both sides with one "safe edge". The rasp is thinner close to its tip to allow ease of entry into your workpiece. For flat and convex work only. As normal, the longer the rasp, the coarser it is. We offer 2 sizes. The sizes shown are the rasp dimensions without the handle. The...
from £91.00 inc VAT
Auriou Cranked Neck Curved Ironing Rasps
Auriou Cranked Neck Curved Ironing Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE. These are very useful for working in small areas. The rasp is short and is curved along its length so you can enter your work easily. The tang is cranked to allow knuckle clearance. 4 sizes and grains based on width:- 10mm wide Grain 12 15mm wide Grain 11 20mm wide Grain 10 25mm wide Grain 09 30mm wide Grain...
from £56.00 inc VAT

Auriou Needle RaspsAuriou Needle Rasps
Auriou Needle Rasps
1/2 round, flat, rat tail and knife shaped needle rasps, very fine grain (14) for detailing work. Approximately 7¼" long with a 2¾" blade, these are well suited for making models or musical instruments and shaping keyholes or pierced carvings - anywhere a larger tool would be awkward or too aggressive. Stickmakers love using these for detailing work on their sticks.
from £46.00 inc VAT
Auriou 4 in 1 RaspAuriou 4 in 1 Rasp
Auriou 4 in 1 Rasp
Flat on one side, convex on the other, with two stitches (grain 7 & 9). Use the finer stitch across the grain and the coarser stitch with grain when speed and close dexterity are needed. Useful for stickmakers and knife handle makers.
£78.00 inc VAT

Auriou Curving (Chairmakers) RaspAuriou Curving (Chairmakers) Rasp
Back In Stock
Auriou Curving (Chairmakers) Rasp
Called a curving rasp but also known as a chair makers rasp due to its usefulness for shaping the crest rail or seat of a chair or working any large concave surface. Michel Auriou also comments that this rasp is effective when working along the grain and is very useful in shaping cabriole legs. 250mm (10") overall with coarse grain 7 teeth for rapid stock removal. One end is a tapered half-round...
£83.00 inc VAT
Auriou Locksmiths RaspAuriou Locksmiths Rasp
Auriou Locksmiths Rasp
This is a very typical old French combination shaped rasp. It is called a locksmiths rasp and has a large knife shaped end and a rat tail end. It is 250mm overall (10 inches) and is used to shape mortises or grooves, not just by locksmiths nowadays but used by sculptors. Grain 9.
£86.40 inc VAT

Auriou Rotary RaspsAuriou Rotary Rasps
Auriou Rotary Rasps
These hand cut rotary rasps are very popular in Germany & Austria (not sure why really) Like it's big brother above this rotary rasp will cut (not burn) your wood quite precisely. It works well on the Arbortech long angled grinder. Small rotary rasp for Arbortech type grinders. Rounded edge grain 7 (medium).
from £80.00 inc VAT
Left Handed Auriou Cabinet Maker's Rasps
Left Handed Auriou Cabinet Maker's Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE. These are the basic rasps for shaping work. They are relatively wide in proportion to their length giving you considerable cutting power. You will get surprisingly smooth finishes to your work. As a general guide you should chose a rasp which is 3/4 times longer then the width of the piece you are shaping. As an example...
from £99.50 inc VAT

Left Handed Auriou Modellers Rasps
Left Handed Auriou Modellers Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE. These are similar to cabinet rasps but are not as wide relative to their length. This allows you to work in tighter spaces. They are for more delicate shaping work and complement the work done by cabinet makers rasps. The 6" (150mm) grain 15 rasp is for making very fine refinements to your work whilst the 7"...
from £85.00 inc VAT
Left Handed Auriou Albi Combination Rasps
Left Handed Auriou Albi Combination Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE. These are stitched on both sides with one "safe edge". The rasp is thinner close to its tip to allow ease of entry into your workpiece. For flat and convex work only. As normal, the longer the rasp, the coarser it is. We offer 2 sizes. The sizes shown are the rasp dimensions without the handle. The...
from £91.00 inc VAT

Left Handed Auriou Cranked Neck Curved Ironing Rasps
Left Handed Auriou Cranked Neck Curved Ironing Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE. These are very useful for working in small areas. The rasp is short and is curved along its length so you can enter your work easily. The tang is cranked to allow knuckle clearance. 4 sizes and grains based on width:- 10mm wide Grain 12 15mm wide Grain 11 20mm wide Grain 10 25mm wide Grain 09 30mm wide Grain...
from £56.00 inc VAT
Auriou Riffler Rasp - Knife / Spoon
Auriou Riffler Rasp - Knife / Spoon
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £63.00 inc VAT

Auriou Riffler Rasp - Rhombus / Brush
Auriou Riffler Rasp - Rhombus / Brush
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £63.00 inc VAT

Auriou Riffler Rasp - V Shape / Rectangle
Auriou Riffler Rasp - V Shape / Rectangle
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £63.00 inc VAT
Auriou Riffler Rasp - Thumb / Laurel
Auriou Riffler Rasp - Thumb / Laurel
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £63.00 inc VAT

Auriou Riffler Rasp - Rat Tail / Oval
Auriou Riffler Rasp - Rat Tail / Oval
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £63.00 inc VAT
Auriou Riffler Rasp - Half Round / Triangular
Auriou Riffler Rasp - Half Round / Triangular
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
from £63.00 inc VAT

Auriou Riffler Rasp Set of 6 - 150mmAuriou Riffler Rasp Set of 6 - 150mm
Auriou Riffler Rasp Set of 6 - 150mm
All six double ended rifflers giving you 12 precision shaping heads. 150mm (6") Grain 14. Set includes: Knife / Spoon Rhombus / Brush V Shape / Rectangle Thumb / Laurel Rat Tail / Oval Half Round / Triangular Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).
£345.00 inc VAT
Auriou Riffler Rasp Set of 6 - 175mmAuriou Riffler Rasp Set of 6 - 175mm
Auriou Riffler Rasp Set of 6 - 175mm
All six double ended rifflers giving you 12 precision shaping heads. 175mm (7") Grain 13. Set includes: Knife / Spoon Rhombus / Brush V Shape / Rectangle Thumb / Laurel Rat Tail / Oval Half Round / Triangular Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).
£345.00 inc VAT

Auriou Riffler Rasp Set of 6 - 200mmAuriou Riffler Rasp Set of 6 - 200mm
Auriou Riffler Rasp Set of 6 - 200mm
All six double ended rifflers giving you 12 precision shaping heads. Set includes: Knife / Spoon Rhombus / Brush V Shape / Rectangle Thumb / Laurel Rat Tail / Oval Half Round / Triangular Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).
£350.00 inc VAT
Auriou Riffler Rasp Set of 6 - 250mmAuriou Riffler Rasp Set of 6 - 250mm
Auriou Riffler Rasp Set of 6 - 250mm
All six double ended rifflers giving you 12 precision shaping heads. Set includes: Knife / Spoon Rhombus / Brush V Shape / Rectangle Thumb / Laurel Rat Tail / Oval Half Round / Triangular Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).
£450.00 inc VAT

Auriou 9'' Curved DrawknifeAuriou 9'' Curved Drawknife
Back In Stock
Auriou 9'' Curved Drawknife
Auriou's high quality, hand-forged tools are well known to discerning woodworkers, Famous for their hand stitched rasps and rifflers Auriou are using their small team of highly skilled artisans to produce a small range of tools to balance their portfolio of tools. Launched in autumn 2010 this large, curved-blade draw knife is sure to become a favourite in green woodworking circles. The 9"...
£125.00 inc VAT
Auriou 9'' Straight DrawknifeAuriou 9'' Straight Drawknife
Back In Stock
Auriou 9'' Straight Drawknife
Auriou's high quality, hand-forged tools are well known to discerning woodworkers, Famous for their hand stitched rasps and rifflers Auriou are using their small team of highly skilled artisans to produce a small range of tools to balance their portfolio of tools. Launched in autumn 2010 this large, straight-blade draw knife is sure to become a favourite in green woodworking circles. Turned...
£125.00 inc VAT

Auriou Small Offset DrawknifeAuriou Small Offset Drawknife
Back In Stock
Auriou Small Offset Drawknife
Auriou have created a small offset drawknife that is 6" wide, curved blade 1" deep, with offset handles (these are above the plane of the cutting edge giving knuckle clearance). this would be more useful for smaller stock removal and delicate trimming. Short 3¼" beech handles with brass ferrules. Hand forged at Forge de Saint Juery, France, home of Auriou Toolworks.
£116.00 inc VAT
Auriou Allongee Gouge Series No.3Auriou Allongee Gouge Series No.3
Auriou Allongee Gouge Series No.3
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from this ''Basic'' range please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
from £36.00 inc VAT

Auriou Allongee Gouge Series No.5 - 20mm (3/4")
Auriou Allongee Gouge Series No.5 - 20mm (3/4")
This Auriou 20mm (3/4") Allongee Gouge forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. The chisels are allongee chisels with a slim blade section. Allongee is a style of blade that...
£41.50 inc VAT
Auriou Allongee Gouge Series No.6Auriou Allongee Gouge Series No.6
Auriou Allongee Gouge Series No.6
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" and Letter Carving Tools carving tools. To view more tools from these ranges please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
from £39.00 inc VAT

Auriou Allongee Gouge Series No.9Auriou Allongee Gouge Series No.9
Auriou Allongee Gouge Series No.9
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from this ''Basic'' range please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
from £42.50 inc VAT
Auriou Double Bevel Fishtail Chisel - 14mm (9/16")Auriou Double Bevel Fishtail Chisel - 14mm (9/16")
Auriou Double Bevel Fishtail Chisel - 14mm (9/16")
This Auriou Double Bevel Fisthail Chisel - 14mm (9/16") forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Auriou woodcarving tools have been among Chris Pye's favourite tools since...
£31.00 inc VAT

Auriou Double Bevel Lettering ChiselsAuriou Double Bevel Lettering Chisels
Auriou Double Bevel Lettering Chisels
This range of double bevel lettering chisels forms the backbone of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. The chisels are allongee chisels with a slim blade section. Allongee is a style of blade...
from £30.00 inc VAT
Auriou Fishtail Gouge Series No.4 - 10mm (13/32")Auriou Fishtail Gouge Series No.4 - 10mm (13/32")
Auriou Fishtail Gouge Series No.4 - 10mm (13/32")
This Auriou Fishtail Gouge Series No.4 - 10mm (13/32") forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Auriou woodcarving tools have been among Chris Pye's favourite tools since...
£40.00 inc VAT

Auriou Short Fishtail Gouges Series No.3Auriou Short Fishtail Gouges Series No.3
Auriou Short Fishtail Gouges Series No.3
These short fishtail gouges form part of the Chris Pye Short Fishtails range. To see other tools from this range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Short fishtail just means the end is splayed rather than with a straight gouge (consistent profile along the...
from £40.00 inc VAT
Auriou Short Fishtail Gouges Series No.5Auriou Short Fishtail Gouges Series No.5
Auriou Short Fishtail Gouges Series No.5
These short fishtail gouges form part of the Chris Pye Short Fishtails range. To see other tools from this range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Short fishtail just means the end is splayed rather than with a straight gouge (consistent profile along the...
from £41.00 inc VAT

Auriou Short Fishtail Gouges Series No.7Auriou Short Fishtail Gouges Series No.7
Auriou Short Fishtail Gouges Series No.7
These short fishtail gouges form part of the Chris Pye Short Fishtails range. To see other tools from this range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Short fishtail just means the end is splayed rather than with a straight gouge (consistent profile along the...
from £42.50 inc VAT
Auriou Short Fishtail Gouges Series No.9 - 6mm (7/32')
Auriou Short Fishtail Gouges Series No.9 - 6mm (7/32')
AVAILABLE AS A FULL SET & AS INDIVIDUAL TOOLS Short fishtail just means the end is splayed rather than with a straight gouge (consistent profile along the body) or allongee (splay starts from the shoulder of the carving tool to the cutting edge). Lightweight and with beautifully forged short fishtail shapes these 7 gouges, designed by Chris Pye, are a lovely example of how hand forged tools, made...
£43.50 inc VAT

Auriou Straight Gouge Series No.3Auriou Straight Gouge Series No.3
Auriou Straight Gouge Series No.3
These Auriou Straight Gouges Series No.3 form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from these ranges please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools you'll...
£32.00 inc VAT
Auriou Straight Gouge Series No.5 - 11mm (7/16")
Auriou Straight Gouge Series No.5 - 11mm (7/16")
This Auriou Series No.5 - 11mm (7/16") Straight Gouge forms part of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Auriou woodcarving tools have been among Chris Pye's favourite tools since...
£37.00 inc VAT

Auriou Straight Gouge Series No.6Auriou Straight Gouge Series No.6
Auriou Straight Gouge Series No.6
These Auriou Straight Gouges form part of the Chris Pye's selection of "Basic" and Letter Carving Tools carving tools. To view more tools from these ranges please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
from £35.00 inc VAT
Auriou Straight Gouge Series No.9Auriou Straight Gouge Series No.9
Auriou Straight Gouge Series No.9
These Auriou Straight Gouges form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from this ''Basic'' range please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
£37.50 inc VAT

Auriou Straight Skew Chisel - 10mm (13/32")
Auriou Straight Skew Chisel - 10mm (13/32")
This Auriou Straight Chisel forms part of the Chris Pye's selection of "Basic" carving tools. To view more tools from these ranges please follow this link. The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools you'll have the means...
£27.00 inc VAT
Chris Pye - Short Fishtail Gouges Set of 7Chris Pye - Short Fishtail Gouges Set of 7
Chris Pye - Short Fishtail Gouges Set of 7
These short fishtail gouges form part of the Chris Pye Short Fishtails range. To see other tools from this range please follow this link. These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France. Short fishtail just means the end is splayed rather than with a straight gouge (consistent profile along the...
£280.00 inc VAT

Chris Pye - Short Fishtail Gouges Set of 7 with Tool RollChris Pye - Short Fishtail Gouges Set of 7 with Tool Roll
Chris Pye - Short Fishtail Gouges Set of 7 with Tool Roll
Lightweight and with beautifully forged short fishtail shapes these 7 gouges, designed by Chris Pye, are a lovely example of how hand forged tools, made in a traditional manner possess a delicacy that few manufacturers can match. The set consists of 7 tools with octagonal ash handles with tapered brass ferrules Series #3 - 6mm (7/32"), 14mm (1/16") Series #5 - 6mm (7/32"), 14mm...
£320.00 inc VAT
Chris Pye 14 Piece Letter Carving Set
Chris Pye 14 Piece Letter Carving Set
The full set of 14 Woodcarving Tools has everything the 7 piece set has: 15mm Double Bevel Lettering Chisel 20mm Double Bevel Lettering Chisel 25mm Double Bevel Lettering Chisel 30mm Double Bevel Lettering Chisel 35mm Double Bevel Lettering Chisel 40mm Double Bevel Lettering Chisel 45mm Double Bevel Lettering Chisel Plus: Double Bevel Fishtail Chisel width 14mm (9/16") Fishtail...
£490.00 inc VAT
Page: 1 | 2 |