Sort By
Per Page
View
Grid
List
Pfeil Back Bent Gouges Series 10
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 20
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 25
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 28
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 30
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Series 17 - Staehli Gouges
The form gives two tools in one - a sharp radious at the base and sides swept like a No.2 Ideal for carving lettering and ornamental work.
Pfeil Series 18 - Schaller Gouges
This multi-use tool is ideal for roughing out sculptures. The base is swept like a No. 11, for cutting curves and hollows. The sides are swept like a No. 3 for cutting surfaces.
Pfeil Series 21 - Dog Leg Chisels
Dog leg chisels are used for finishing rectangular depressions.
Pfeil Series 22 - Wing Parting Tool
Traditional old English form. For finishing fingers, toes, lips etc.
Pfeil Series 23 - Macaroni
The Pfeil Macaroni tool is two forms in one - the base is a straight chisel No 1 and the corners form a parting tool.
Pfeil Series 24 - Fluteroni
This Pfeil Fluteroni is a tool with an assortment of radii.
Auriou Allongee Gouge Series No.3
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from this ''Basic'' range please follow this link.
The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
Auriou Allongee Gouge Series No.6
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" and Letter Carving Tools carving tools. To view more tools from these ranges please follow this link.
The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
Auriou Allongee Gouge Series No.9
These Auriou Allongee Gouges form part of the Chris Pye's selection of "Basic" carving tools. To view more tools from this ''Basic'' range please follow this link.
The woodcarving tools from this range will give you many carving choices: deep gouges for shaping, medium for modelling, flat gouges for smoothing surfaces, and the ever-useful V tool; and with these tools...
Pfeil - 12 Piece Carving Set
The Pfeil 12 piece carving set has everything you need for all simple carving projects.
This twelve piece fully forged, ready honed set contains the following full size tools: 1/8, 1s/8, 5/8, 5/20, 7/6, 7/14,7L/20, 8/4, 8a/10, 9/10, 11/3, and 12/6.
This in plain English means:
8mm straight and skew chisels,
8mm & 20mm Series 5 gouges,
14mm & 6mm Series 7 gouges,
20mm Series 7 long...
Pfeil Medium Sized Tools - Straight Chisel - Series 1
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The Pfeil Medium D1 Straight Chisels are available with widths of 5mm, 8mm and 12mm.
Pfeil Medium Sized Tools - Skew Chisel - Series 1S
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The Pfeil Medium D1S Skew Chisel is available with widths of 5mm, 8mm and 12mm.
Pfeil Medium Sized Tools - Series 2
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - Series 3
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - Series 5
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - Series 7
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - Series 8
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - Series 9
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - Series 11
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Pfeil Medium Sized Tools - V Tools
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The D12 (60°) V Tool: 2mm, 4mm, 6mm and 8mm.
The D14 (55°) Soft V Tool is 6mm wide.
The D15 (45°) V Tool is 3mm wide.
Pfeil Medium Sized Tools - Spoon Gouges
Pfeil Medium Sized Tools for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The Pfeil Medium Sized Spoon Gouges come in 2 options:
D5A Series 5 - 8mm width.
D8A Series 8 - 7mm width.
Pfeil Medium Sized Tools - Long Bent Gouge
Pfeil Medium Sized Tools for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The D7L Series 7 Long Bent Gouge is available in 10mm width.
Pfeil Medium Sized Tools - Set of 4
Pfeil Medium Sized Tools - Set of 4 come in a plastic slip case and includes:
1 x Chip Carving Knife;
1 x Straight Chisel: 8mm (D1-8);
1 x Gouge: Series 8 - 7mm (D8-7);
1 x 60° V-Tool: 6mm (D12-6).
Size 260 x 130mm
Weight 160g
Pfeil Medium Sized Tools - Set of 6
Pfeil Medium Sized Tools - Set of 6 comes in a display stand and includes:
1 x Straight Chisel: 8mm (D1-8);
1 x Skew Chisel: 8mm (D1S-8);
3 x Gouges: Series 5 - 8mm (D5-8), Series 8 - 7mm (D8-7), Series 11 - 1mm (D11-1);
1 x 60° V-Tool: 2mm (D12-2).
Pfeil Medium Sized Tools - Set of 12
Pfeil Medium Sized Tools - Set of 12 comes in a display stand and includes:
1 x Straight Chisel: 8mm (D1-8);
1 x Skew Chisel: 8mm (D1S-8);
7 x Gouges:
Series 5 - 3mm (D5-3) & 8mm (D5-8),
Series 8 - 7mm (D8-7),
Series 9 - 5mm (D9-5),
Series 9 - 10mm (D9-10),
Series 11 - 1mm (D11-1) & 3mm (D11-3);
1 x Spoon Gouge: Series 8 - 7mm (D8-7);
2 x 60° V-Tool: 2mm (D12-2), 8mm (D12-8).
Pfeil Medium Sized Tools - Set of 18
Pfeil Medium Sized Tools - Set of 18 comes in a beechwood box and includes:
1 x Straight Chisel: 8mm (D1-8);
1 x Skew Chisel: 8mm (D1S-8);
12 x Gouges:
Series 2 - 12mm (D2-12),
Series 5 - 3mm (D5-3) & 8mm (D5-8) & 12mm (D5-12),
Series 7 - 4mm (D7-4) & 14mm (D7-14),
Series 8 - 7mm (D8-7) & 10mm (D8-10),
Series 9 - 5mm (D9-5) & 10mm (D9-10),
Series 11 - 1mm (D11-1) &3mm (D11-3);
1 x Spoon Gouge: Series...
Carving Tools Set - 6 Tool Starter Set from Henry Taylor - Sheffield
The starter set comes with a little booklet which guides you through a simple relief project written by renowned carver Jeremy Williams.
All the tools come with the unique Acorn branding on the octagonal beech handles.
The 6 tools in the set are
- Flat carving chisel 6mm wide
- Shallow gouge (No.3) 6mm wide
- Medium gouge (No.5) 8mm wide
- V (parting) tool (No.39) 6mm wide
- 6mm...
Pfeil Lino & Block Cutting Tools - Set of 12
Pfeil Lino & Block Cutter Tools - Sets
Pfeil Lino & Block Cutting Tools - Individual
Pfeil palm handled tools for lino and block cutting available in wide range of sizes. These tools are the same high quality as the basic carving tools.
Precisely ground and polished.
Pear handles, 70mm blade length, 125mm overall length
Please see the larger images for the shape of the tool.
Pfeil Palm Carving Tools
Pfeil Palm Carving Tools are for cutting and carving wood.
They have Pear Handles, 135mm overall length, and 80mm blade length.
See images for individual blade shapes.
Sets of 8 include a Linden wood stand (340 x 145 x 50mm, weight 850g).
There are two sets available:
B8er - A includes: B1/12, B1s/12, B3/12, B5/12, B7/14, B8a/10, B9/10 & B12/8.
B8er - B includes: B2/12, B4/12, B7L/12, B8/10,...
Pfeil Lino & Block Cutting Tools - Sets of 6
Pfeil Lino & Block Cutter Tools - Sets
Pfeil Palm Carving Tool Sets
Pfeil Palm Carving Tools are for cutting and carving wood.
They have Pear Handles, 135mm overall length, and 80mm blade length.
See images for individual blade shapes.
Sets of 8 include a Linden wood stand (340 x 145 x 50mm, weight 850g).
There are two sets available:
B8er - A includes: B1/12, B1s/12, B3/12, B5/12, B7/14, B8a/10, B9/10 & B12/8.
B8er - B includes: B2/12, B4/12, B7L/12,...
Flexcut 5 Piece Lino & Relief Printmaking Set SK130
This Flexcut 5 piece Printmaking Set contains 4 carving blades, a quick connect ABS handle, 11 pocket tool roll, as well as a custom strop and polishing compound.
Relief printing is based on a reductive process - carve the non image away from a flat, level surface and ink the remaining top surface with a roller or brayer in order to print the image.
Profiles included:
SK306 #6 x 5/16''
SK309...
Flexcut Single Bevel Chisels
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Flexcut Double Bevel Skew Chisels
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Flexcut No.3 Sweep Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Flexcut No.5 Sweep Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Flexcut No.6 Sweep Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.