Sort By
Per Page
View
Grid
List
Journeyman Handcrafts Wool Lined Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from a two colours of 8oz waxed cotton canvas giving a lovely contrast of colour when rolled up. The tool roll is lined with a cream wool to give added protection to your tools.
This tool roll is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon...
Oscar Rush Large Bowl Adze
A hand forged 50mm diameter hand adze with elliptical sweep profile to the cutting edge.
The head weight is approximately 600g with a 230mm - 235mm long (just over 9''), hand carved, faceted, kin dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been carefully designed for...
Oscar Rush Large Carving Axe - Left Grind
NOTE - Oscar Rush has decided not to make this particular axe as from now (spring 2025) - so when we are SOLD OUT that will be it.
This is a large carving axe with a really broad edge (left grind), designed to throw big chips!
This axe will still work well in the right hands when creating smaller carvings.
145mm - 150mm (6'') edge - LEFT grind.
The head weight is approximately...
Oscar Rush Medium Carving Axe
A standard weight carving axe retaining a relatively compact design but with a broader curved edge for slicy cuts.
This carving axe has a 120mm - 125mm (5'') edge - SYMMETRICAL grind only for this axe (also known as double grind).
The head weight is approximately 625g. If striking the poll, do so with a wooden mallet (not a steel hammer)
The handle - hand carved 300mm - 320mm long...
Oscar Rush Small Bowl Adze
A hand forged 30mm diameter hand adze with a compound sweep profile to the cutting edge (more of a U profile).
The head weight is approximately 450g with a 210mm - 215mm long (just over 8'') hand carved, faceted, kin dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been...
Oscar Rush Small Carving Axe
A small carving axe for all sizes of carving.
This stout hand forged carving axe has a 95mm - 100mm (4'') edge - SYMMETRICAL grind (also known as double grind).
The head weight is approximately 475 - 500g.
If striking the poll, do so with a wooden mallet (not a steel hammer).
The handle is hand carved by Oscar, 275mm - 285mm long (just over 11''), faceted, kin dried ash...
The Robert Sorby ProEdge Ultimate Sharpening System
The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated!
Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...
Gransfors Bruk Large Carving Axe 475
A chop axe for hewing bowls and other wooden objects, artistic wood carving and architectural work. The characteristic curved shape of the cutting edge, carried well above the head’s eye, the position of the edge in proportion to the handle, the rather thick bit and the big angle of the wide beveled face makes the axe a good carving tool. You "cut on the beveled face" with curved movements. This...
Pfeil Hatchet
The Pfeil Hatchet is forged from quality steel.
Overall length 460mm (about 18")
Weight 1300gms with cutting edge of 140mm.
Pfeil Sculptor's Hatchet
The Pfeil Sculptor's Hatchet is a small hatchet which is very handy and easy to guide. With leather edge protector.
Overall length 280mm (about 11")
Weight 550gms with cutting edge of 80mm.
Pfeil Sculpture's Adze
The Pfeil Sculptor's Adzes follow old French designs.
Available with Straight, Curved or Round blades, these tools are forged from quality tool steel, hardened and sharpened with Hickory handles.
Straight:
Overall length 450mm (about 18").
Weight 800gms.
Cutting edge of 65mm.
Curved:
Overall length 450mm (about 18")
Weight 850gms.
Cutting edge of 60mm.
Round:
Overall...
Henry Taylor Bowl Adze
Sheffield made hand forged adzes by Henry Taylor for single handed use.
This one is a tight gouge (sweep 9), however this lucky fella is outcannel which makes it a Bowl Adze.
At the other end to the cutting edge is a square faced hammer poll.
All Henry Taylor adzes have an ash handle of 250mm (about 10") .
The overall head size (from the square face of the hammer poll to the cutting edge)...
Henry Taylor Hand Adze Deep Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes; this one is a tight incannel gouge (sweep 9), and is offered with an incannel or outcannel grind.
The outcannel grind is favoured by those working concave surfaces as it allows the leading edge to enter the working area easier.
At the other end to the cutting edge is a square faced hammer...
Henry Taylor Hand Adze Shallow Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a gouge end with a shallow/mid gouge or there is a tight gouge (sweep 9) and a 50mm (2") straight edge (like a chisel).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size (from the...
Henry Taylor Hand Adze Straight Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a 50mm (2") straight edge (like a chisel) or curved end (like a gouge) with either a shallow/mid gouge or a tight gouge (sweep 9).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size...
Muller French-Style Sculptors Adze
Again, these adzes are from Leonhard Muller's Carpenter's Hatchets range but they are based on the traditional French design where the head gradually flares from the poll. 3 sweep widths to chose from and all come with straight hickory handles.
Straight 450mm hickory handles (about 18")
Choice of 65mm, 60mm or 56mm wide medium sweep cutting edge.
