Sort By
Per Page
View
Grid
List
Henry Taylor Incannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Robert Sorby Double Hooped Registered Chisel
Originally it was thought that registered (or shipwrights chisels) were used by barge builders and they first appeared in the mid 19th century. “strong ship” or registered chisels were also described in the Scottish tool manufacturer Mathieson’s catalogue of 1900. More recently these chisels have become very popular with joiners and timber framers for mortising. The double hoops give...
Henry Taylor Outcannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F17 - 1/4" (6mm)
F18 - 3/8" (9mm)
F19...
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers.
The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased.
Forged...
Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Henry Taylor Outcannel Firmer Gouges - Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F17 - 1/4" (6mm)
F18 - 3/8" (9mm)
F19...
Robert Sorby Framing Chisel
The Robert Sorby Framing Chisel is the same principle as their registered chisel but with a longer blade and handle for deeper morticing work.
Overall Size:- 495mm
Blade Length:- 267mm
Barr Framing Chisels
Barr's framing chisels have become the first choice of professional timber framers and homebuilders. These chisels will take and hold a superior edge saving you time and giving you the best possible results. Hand forged from carbon steel with a flat back and socket handle, they are a must for mortise and tenon work.
The chisels are all 17½" (438mm) long overall.
Available as 1" (25mm), 1½" (38mm),...
Robert Sorby Bevel Edged Framing Chisel
Very similar to the RS285 framing chisel that the blade is beveled to give extra clearance in the cut. Tapered along the length. Ash handle. Shorter than the RS285 - 388mm overall length.
Robert Sorby Timber Framer's Slick
This heavy duty timber framers and boat builders slick from Robert Sorby has an offset blade to allow for clearance when working in deep sockets and mortises. It can also be used as a massive paring chisel. Choice of two widths - 2-3/8" (60mm) & 3-3/8" (85mm).
Solid one piece forged blade including the heavy tang which is set deep into the handle. A heavy duty socket is fitted between...
Barr Bench Chisels
The bench chisel has the same quality construction as their popular framing chisels, but with a shorter blade length.
The chisels are all 13" (325mm) long overall.
Available as 1" (25mm), 1½" (38mm), 2" (50mm) or as a set of 3 Bench Chisels.
Barr Small Slick
Built with the same fine construction as the large slick, the small slick has a 5" blade length making it a little less hefty.
2½" cutting edge, 5½" blade length, length from cutting edge to end of socket 12", length with handle 26
Barr Large Slick
This large slick will take on the toughest jobs with ease. They take and hold a fine edge without being brittle. The handle angles up away from your work surface to allow hand clearance. If you are fed up with poor quality slicks, try one of these. Like all Barr tools, your satisfaction is guaranteed or your money back.
2½" cutting edge, 7½" blade length, length from cutting edge to end of socket...
Barr Fat Boy Slick
If you need a big slick for paring, this is the one! The curved edge skives into the material lessening the initial force needed to start your cut.
3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30".
Barr Scarf Slick
Invaluable for cutting scarf joints on your timber projects, this slick is a favorite among log and timber smiths. It is also well-suited for cleaning up adzed timbers. Barr's scarf slick has a mild sweep with a curved edge and will give you a slight concave cut.
3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30".
Please note that this slick is not flat (by...
Robert Sorby Heavy Duty Corner Chisel
A heavyweight 1" (25mm) wide bruzz (corner chisel) for cleaning up deep corners of mortises.
Ash Handle
Overall Size:- 380-407mm
Blade Length 239mm
Barr 7/8' Corner Chisel
Corner chisels are forged from tough carbon steel; these chisels are hand-tapered, bent to 90 degrees, then flat ground.
Terrific for cleaning out mortises.
7/8" (22.225mm) x 7/8" (22.225mm) x 18" (450mm)
Holster for Robert Sorby Timber Framer's Slick
A quality riveted leather holster for safer carriage of the Robert Sorby Timber Framer's Slick.
Kamanomi Japanese Chisel
Used for cleaning the corners of joints.
Sokosarai Japanese Chisel
Used for scraping and levelling the bottom of mortices.
Robert Sorby Corner Chisel
Designed for squaring up the ends of mortises, grooves or housings. The faces are precision ground to produce clean, accurate 90 degree angles. Often used nowadays to clean up after a router. Sharpen each face individually with an oil stone.
The origins of this tool are from wheelwrights and millwrights who used a v shaped chisel to hollow out mortises in wheels and wooden beams (often referred...
Ashley Iles Corner Chisels
Ashley Iles corner chisels are available in 3/8" (9mm) and 1/2" (12mm).
Lie-Nielsen Corner Chisel 3/8''
Producing square mortises is exacting work. The Corner Chisel, used after the mortise has been roughed out by hand or with a slot mortiser—which produces round edged mortises—helps square corners easily and precisely.
Made from A2 Tool Steel, hardened to RC 60-62 and ground razor sharp. Beveled at 30º. Comes with a Hickory handle. Overall length is approximately 10".
Currently...
Henry Taylor Swan Neck Chisels
A Henry Taylor swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck.
Available in 1/4", 5/16" and 3/8".
Veritas Set of 3 Miniature Chisels
This chisel set is the latest addition to the Veritas line of fully functional miniature tools. Made at about 1/3 the scale of our regular bench chisels, each is only about 3-1/4" long overall and weighs less than a third of an ounce. At this scale, the three tools in the set have 3/8", 1/4" and 1/8" wide blades. All permit a delicate touch where fine, controlled cuts are needed.
Their...
Lie-Nielsen 12 Tool Chisel Roll
12 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Robert Sorby Leather Edge Guards
We highly recommend edge guards to protect yourself and your tools.
The chisel guards are available in 1", 1½" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels.
The slick guards are available in 60mm and 85mm sizes suitable for the 289 framer's slicks.
Lie-Nielsen 7 Tool Chisel Roll
7 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Lie-Nielsen 9 Tool Chisel Roll
9 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Lie-Nielsen Mortice Chisel Roll
7 pocket leather tool roll, Brass fittings. Deeper tool roll accommodates the Lie-Nielsen mortise chisels. Beautifully made in Maine, USA.
Lie-Nielsen Chisel Handles
Lie-Nielsen chisel handles are made from Maine-harvested Hornbeam and can be used with any of the Lie-Nielsen chisels.
The standard handle is recommended for all but the largest chisels.
Long chisel handles are 4" longer than the standard handles. Excellent for paring.
The Mortise chisel handles are slightly larger in diameter and length than the standard chisel handle, the Mortise Chisel Handle...