Flexcut Knife Set KN100Flexcut Knife Set KN100
Flexcut Knife Set KN100
Flexcut have combined some of their most popular knives into one great value set. Each set includes a KN12 cutting knife, KN13 detail knife, KN18 pelican knife, KN19 mini-pelican knife and tool roll.
£109.00 inc VAT
Flexcut Pocket Knife Roll KN00
Flexcut Pocket Knife Roll KN00
This Flexcut tool roll will hold up to 4 Flexcut knives protecting their edges.
£17.50 inc VAT

Flexcut Skew Knife KN11
Flexcut Skew Knife KN11
The Flexcut skew carving knife is used for taking more vertical cuts where room is limited for a conventional whittling stroke.
£23.75 inc VAT
Flexcut Cutting Knife KN12
Flexcut Cutting Knife KN12
The Flexcut Cutting Knife is a general purpose carving knife. Its more rounded point is very durable. Great beginners knife. 1-1/8" blade length.
£26.25 inc VAT

Flexcut Detail Knife KN13
Back In Stock
Flexcut Detail Knife KN13
The Flexcut Detail Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 1½" blade can accommodate larger stock removal if needed.
£26.25 inc VAT
Flexcut Roughing Knife KN14
Flexcut Roughing Knife KN14
Flexcut's roughing knife features a straight, 2" blade, for heavier stock removal, with a rounded durable point.
£27.75 inc VAT

Flexcut Chip Carving Knife KN15
Flexcut Chip Carving Knife KN15
This is Flexcut's traditional chip carving knife. It is honed, polished and ready to carve.
£25.25 inc VAT
Flexcut Pelican Knife KN18
Flexcut Pelican Knife KN18
The Flexcut Pelican Knife with its curved 1 5/8" blade offers a clean slicing action similar to a skew. The point is narrowed for a tight turning radius while still being durable. Cuts very well in hollow areas.
£29.50 inc VAT

Flexcut Mini-Pelican Knife KN19
Flexcut Mini-Pelican Knife KN19
The Flexcut mini-pelican knife offers the same features as its larger brother (KN18) only with a 7/8" ultra thin blade for the lowest resistance when fine cutting is required. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
£30.25 inc VAT
Flexcut Mini Chip Knife KN20
Flexcut Mini Chip Knife KN20
The Flexcut Mini Chip carving knife has a 5/8" ultra thin blade, making unwanted chipping in delicate cuts less likely. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
£24.75 inc VAT

Flexcut Hook Knife KN26
Flexcut Hook Knife KN26
The Flexcut hook knife blade is curved, similar to a gouge for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.
£27.75 inc VAT
Flexcut Double Bevel Sloyd Hook Knife KN51
Flexcut Double Bevel Sloyd Hook Knife KN51
The Flexcut Double Bevel Sloyd Hook Knife is ideal for carving spoons, bowls, ladles and other deep hollowed work. It features a double-sided blade with a square, sharpened end. For added strength, the tang of each knife extends completely through the beautifully conditioned Cherry hardwood handle. It also features a brass ferrule for added stability. The overall length of this knife is 8½"...
£90.25 inc VAT

Flexcut Single Bevel Sloyd Hook Knife KN52
Flexcut Single Bevel Sloyd Hook Knife KN52
The Flexcut Single Bevel Sloyd Hook Knife is perfect for forming the hollows of spoons and bowls. The deeply curved, single-edged blade is sharpened all the way to the pointed tip. For added strength, the tang of each knife extends completely through the beautifully conditioned Cherry hardwood handle. It also features a brass ferrule for added stability. The overall length of this knife is 8"...
£91.75 inc VAT
Flexcut Sloyd Knife KN50Flexcut Sloyd Knife KN50
Flexcut Sloyd Knife KN50
This Flexcut Sloyd Knife comes razor sharp and ready for use. Much like traditionally-designed Swedish tools, this carving knife is a durable, well-made tool, ideal for spoon carving, whittling, marking, and general woodworking and handicrafts. Its versatility allows you to use it for a wide range of wood carving projects from detail work to roughing. Use it to shave bark or use its fine tip for...
£60.75 inc VAT

Flexcut Carvin' Jack JKN91Flexcut Carvin' Jack JKN91
Flexcut Carvin' Jack JKN91
The Flexcut Carvin' Jack is the first folding multi-tool designed specifically for the needs of woodcarving. At 3.5 ounces and a closed length of 4¼", each come with a leather belt mounted sheath and a custom strop for maintaining the sharpest possible edge. Blades included: Detail Knife, Straight Gouge, Chisel, V-Scorp, Gouge Scorp, and Hook Knife. Right-Handed carvers should...
£202.00 inc VAT
Flexcut Chip Carving Set KN115Flexcut Chip Carving Set KN115
Flexcut Chip Carving Set KN115
Flexcut's Chip Carving Set is everything you need to create the intricate geometric or freestyle patterns that are the hallmark of the chip carving craft. Lettering is also very much part of the art form - carving the name of somebody special on the boxes, address blocks, wall plaques and other objects you make, turns them into very personal keepsakes that can be cherished and even handed down...
£74.75 inc VAT

Flexcut Detail Jack JKN90Flexcut Detail Jack JKN90
Flexcut Detail Jack JKN90
The Flexcut Detail Jack can handle a variety of projects start to finish. Its single detail knife quickly removes wood from convex surfaces, while its fine point is perfect for detailing delicate areas. The Pistol Grip handle design is crafted from aerospace-grade aluminium and is ergonomically designed to allow a strong grip for long periods of carving with minimal hand fatigue.
£52.75 inc VAT
Flexcut Detail Knife Set KN400Flexcut Detail Knife Set KN400
Flexcut Detail Knife Set KN400
The Flexcut Detail Knife Set contains 3 knives and Sharpening Compound included to keep your knife blade sharp. The three knives included are KN19, KN20 and KN27.
£100.00 inc VAT

Flexcut Mini-Detail Knife KN27
Flexcut Mini-Detail Knife KN27
The mini-detail knife has Flexcut's smallest 3/4" straight blade. It is made from ultra-thin material so as not to disturb adjacent wood for very delicate cuts.
£31.25 inc VAT
Flexcut Hip Knife KN30Flexcut Hip Knife KN30
Flexcut Hip Knife KN30
The Flexcut Hip Knife is a versatile fine cutting tool that is capable of a wide range of woodcarving projects. Its high-carbon steel blade is precision machined and honed ready for use. The knife is supplied in a real leather sheath that easily attaches to your belt.
£40.50 inc VAT

Flexcut Mini-Detail Skew Knife KN31
Flexcut Mini-Detail Skew Knife KN31
The Flexcut Mini Detail Skew knife is excellent for fine eye detail and feathers when decoy carving. Small 9.5mm straight blade, the extended shank helps for a deeper reach of the blade.
£35.75 inc VAT
Flexcut Detail Skew Knife KN32
Flexcut Detail Skew Knife KN32
This Flexcut knife is excellent for fine eye detail and feathers when decoy carving. 14.3mm (9/16") straight blade. The extended shank offers a deeper reach for the blade.
£35.75 inc VAT

Flexcut Hooked Push Knife KN33
Flexcut Hooked Push Knife KN33
This Flexcut knife is an excellent choice for making concave, convex, and shaving cuts. Also designed for cleaning stop cuts.
£35.75 inc VAT
Flexcut Skewed Detail Knife KN34
Flexcut Skewed Detail Knife KN34
The Flexcut Skewed Detail Knife gives the user a different approach to a detail or paring cut. Instead of a perpendicular bevel as found in many detail knives, this bevel is slightly skewed. The handle shape allows holding like a pencil or a conventional knife.
£33.50 inc VAT

Flexcut Fine Detail Knife KN35
Flexcut Fine Detail Knife KN35
Designed by Flexcut for making fine detail cuts, the user also has the ability to "choke up" on the blade for even more precise cuts. The handle shape holds like a pencil or conventional knife.
£33.50 inc VAT
Flexcut Radius Knife KN36
Flexcut Radius Knife KN36
The Flexcut Radius Knife has a curved bevel and blade for making push cuts, slice cuts and V-shaped cuts. The skewed curvature of the bevel allows for a rolling action and a different approach. The handle shape holds like a pencil or conventional knife.
£33.50 inc VAT

Flexcut Hooked Skew Knife KN37
Flexcut Hooked Skew Knife KN37
The Flexcut Hooked Skew Knife features a hooked radial bevel and is perfect for waterfowl carving and cleaning. It also can be used to make V-cuts using a rolling action. The handle shape holds like a pencil or conventional knife.
£33.50 inc VAT
Flexcut Upsweep Knife KN28
Flexcut Upsweep Knife KN28
The Flexcut upsweep knife is designed for incising and carving detailed designs. A versatile knife, the curved blade makes it easier for both carving and shaving type cuts.
£32.50 inc VAT

Flexcut Pocket Jack JKN89Flexcut Pocket Jack JKN89
Flexcut Pocket Jack JKN89
The Pocket Jack for Carvin' is the streamlined version of our Carvin' Jack with the same high-quality. It weighs 3 ounces and has a closed length of 4¼". Blades included: Detail Knife, Straight Gouge, Gouge Scorp, and V-Scorp.
£109.00 inc VAT
Flexcut Starter Knife Set KN500Flexcut Starter Knife Set KN500
Flexcut Starter Knife Set KN500
Flexcut have put together the perfect package to get you started in carving with knives. These knives are made with the same edge-holding properties as their gouges and chisels and come honed and ready for use. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue. Set includes: Cutting Knife (KN12), Detail Knife (KN13) and Roughing Knife (KN14) and a...
£68.50 inc VAT

Flexcut Whittler's Kit KN300Flexcut Whittler's Kit KN300
Flexcut Whittler's Kit KN300
The Flexcut Whittler's Kit is a 2 piece knife set with Sharpening Compound to keep your knife blade sharp. Knives included in the set are KN13 and KN27.
£64.75 inc VAT
Flexcut Tri-Jack Pro JKN95Flexcut Tri-Jack Pro JKN95
Flexcut Tri-Jack Pro JKN95
The Flexcut Tri-Jack Pro has three blades that lock in place - a roughing knife, a detail knife and a mini-cutting knife. The roughing knife is great for modeling surfaces and creating texture, while the detail and cutting knives let you easily make the finest cuts. The Pistol Grip design minimizes hand fatigue and is made of aerospace-grade aluminium with a quarter-cut cherry inlay.
£117.00 inc VAT

Flexcut Spoon Carvin' Jack JKN96Flexcut Spoon Carvin' Jack JKN96
Flexcut Spoon Carvin' Jack JKN96
Flexcut's Spoon Carvin' Jack makes it easy and convenient to handcraft spoons from every kind of wood stock. It has both a shallow and deep hook knife, designed to form the hollows of spoons and bowls. It also features a straight blade for shaping and carving the fine details into the design. Like all of the knives in the Flexcut Carvin' Jack series, the Spoon Carvin' Jack fits neatly...
£152.00 inc VAT
Flexcut Whittlin' Jack JKN88Flexcut Whittlin' Jack JKN88
Flexcut Whittlin' Jack JKN88
Designed for all outdoorsmen; The ultimate for portability. Whittlin' Jack features a 1½" Detail Knife and a 2" Roughing Knife. It weighs in at just 3 ounces and is just over 4" long when closed, so it neatly fits in your pocket. Blades do not lock in place.
£68.50 inc VAT

Flexcut Deluxe Knife Set KN250Flexcut Deluxe Knife Set KN250
Flexcut Deluxe Knife Set KN250
The Flexcut Deluxe Knife Set features the most extensive collection of fixed blade carving knives in the industry to give carvers a wide range of capabilities in one economical package. This set includes 18 razor sharp carving knives designed for roughing to very detailed carving projects. Knives included: KN11 Skew Knife, KN12 Cutting Knife, KN13 Detail Knife, KN14 Roughing Knife, KN15...
£494.00 inc VAT
Flexcut Deluxe Palm & Knife Set KN700Flexcut Deluxe Palm & Knife Set KN700
Flexcut Deluxe Palm & Knife Set KN700
The Flexcut Deluxe Palm & Knife Set brings together two popular tool sets to give woodcarvers a wide range of capabilities in one economical package. Each tool is supplied razor sharp and ready for use. Nine piece set includes: KN12 Cutting Knife, KN13 Detail Knife, KN18 Pelican Knife, KN27 Mini Detail Knife, FR307 6mm V-Tool, FR306 8mm Gouge, FR305 9mm Gouge, FR308 8mm Flat Blade and FR309...
£209.00 inc VAT

Flexcut 5 Piece Craft Carver Set SK106Flexcut 5 Piece Craft Carver Set SK106
Flexcut 5 Piece Craft Carver Set SK106
This Flexcut 5-Piece Craft Carver Set comes with four carving blades, a quick connect ABS handle, leaf project carving blank, and an 11-pocket tool roll. An owner's manual is also included with step-by-step instructions for completing the included project. Profiles included: SK305 #3 x 3/8", SK306 #6 x 5/16", SK801 #9 x 1.5mm, SK307 70 deg. x 1/4".
£69.75 inc VAT
Flexcut 11 Piece Craft Carver Set SK107Flexcut 11 Piece Craft Carver Set SK107
Flexcut 11 Piece Craft Carver Set SK107
This Flexcut 11 Piece Craft Carver Set contains ten carving blades, an interchangeable ABS handle, leaf project carving blank, and an 11-pocket tool roll. Rolled up, this set is extremely portable. An owner's manual is also included with step-by-step instructions for completing the included project. Profiles included: SK329 #1 x 1/4", SK305 #3 x 3/8", SK400 #3 x 5/8", SK401 #5 x 9/16", SK306...
£134.00 inc VAT

Flexcut 21 Piece Deluxe Starter Set SK108Flexcut 21 Piece Deluxe Starter Set SK108
Back In Stock
Flexcut 21 Piece Deluxe Starter Set SK108
This Flexcut Deluxe Starter Set has everything a new woodcarver needs. It comes with 16 interchangeable blades, two quick-connect handles - ABS and Power - and a Cutting Knife. There's also a SlipStrop, Gold Polishing Compound and an owner's manual showing how to care for the tools. Plus you'll find a FREE step-by-step, instructional DVD for a great first project. Profiles included: SK406 #1...
£231.00 inc VAT
Flexcut Beginners 2-Blade Craft Carver Set SK111
Flexcut Beginners 2-Blade Craft Carver Set SK111
The Flexcut Beginner 2-Blade Craft Carver Set has everything needed to tackle a first time project. It comes with two carving blades - a V-Tool and Gouge - plus an interchangeable ABS handle. A basswood blank for the leaf carving project and a second blank for practicing cuts are included. There is also a project DVD with step-by-step visual instructions as well as a 24-page owner's manual that outlines...
£38.75 inc VAT

Flexcut Beginners 3-Blade Craft Carver Set SK110Flexcut Beginners 3-Blade Craft Carver Set SK110
Flexcut Beginners 3-Blade Craft Carver Set SK110
This Flexcut Beginner 3-Blade Craft Carver Set includes everything you'll need to get started in the rewarding world of woodcarving. A basswood, cowboy boot blank, three carving blades, and an interchangeable Palm handle are included. You also receive a project DVD with visual instructions as well as a 16-page project guide. Profiles included: SK407 #2 x 9/16", SK408 #11 x 1/4", SK307 70 deg....
£50.25 inc VAT
Flexcut Single Bevel Chisels
Flexcut Single Bevel Chisels
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
from £16.50 inc VAT

Flexcut Double Bevel Skew Chisels
Flexcut Double Bevel Skew Chisels
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
from £15.75 inc VAT
Flexcut No.3 Sweep Gouges
Flexcut No.3 Sweep Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
from £17.25 inc VAT

Flexcut No.5 Sweep Gouges
Flexcut No.5 Sweep Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
from £18.75 inc VAT
Flexcut No.6 Sweep Gouges
Flexcut No.6 Sweep Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
from £17.25 inc VAT

Flexcut No.8 Sweep Gouges
Flexcut No.8 Sweep Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
from £18.75 inc VAT
Flexcut No.9 Sweep Gouges
Flexcut No.9 Sweep Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
from £19.25 inc VAT
Page: 1 | 2 |