Sort By
Per Page
View
Grid
List
Flexcut No.11 Sweep Veining Gouges
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Flexcut Parting Tools
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Flexcut 7/16' (11mm) Macaroni
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Flexcut Spoons
The Flexcut SK chisels and gouges come unhandled and are designed to fit into the SK100, SK102 and SK103 handles (sold separately). They will also fit the SK109 universal adapter to work in some power carvers.
Flexcut Quick Connect ABS Handle SK100
The Flexcut Quick Connect ABS Handle alllows for tool changes in seconds. The high impact ABS can be struck for light mallet work.
The yellow, soft urethane provides for an exceptional grip. The SK100 accepts all the SK profiles.
Flexcut Quick Connect Palm Handle SK102
Flexcut 2" Quick connect ash palm handle.
The SK102 accepts all the SK profiles including scraper profiles.
Flexcut Quick Connect Power Handle SK103
This Flexcut Quick Connect Power Hand is a 4½'' Ash handle.
It has the same ease of inserting and removing the tool as the SK100 & SK102, it is just longer and its added length allows for greater power for larger tools.
The SK103 is our recommendation as the best handle for the SK120 Scraper Set.
Flexcut 10 pc. Deluxe Mallet Tool Set MC100
This 10 pc. Deluxe Mallet Set is quite versatile with gouges ranging from 1/8" for detail to 1" for hogging off large amounts of waste wood. These tools can be used by hand or can be struck with a mallet and will suit the needs of both novice and advanced carvers.
Mallet Tools included: MC203 #3 x 1/2", MC403 #3 x 1", MC505 #5 x 1-3/16", MC307 #7 x 11/16", MC309 #9 x 1/2", MC511 #10 x 3/4",...
Flexcut 14 Piece Power Gouge Set RG100
This 14 piece Power Gouge Set is a great value and contains a wide selection of tools for roughing out to detailing.
Power Gouges included: RG305 #3 x 3/8", RG400 #3 x 5/8", RG300 #3 x 3/4", RG200 #3 x 1", RG306 #5 x 5/16", RG401 #5 x 9/16", RG301 #5 x 5/8", RG201 #5 x 7/8", RG402 #8 x 3/8", RG302 #8 x 1/2", RG309 #11 x 1/8", RG307 70 deg. x 1/4", RG403 70 deg. x 3/8", RG203 90 deg. x 11/16".
Flexcut 5 Piece Lino & Relief Printmaking Set SK130
This Flexcut 5 piece Printmaking Set contains 4 carving blades, a quick connect ABS handle, 11 pocket tool roll, as well as a custom strop and polishing compound.
Relief printing is based on a reductive process - carve the non image away from a flat, level surface and ink the remaining top surface with a roller or brayer in order to print the image.
Profiles included:
SK306 #6 x 5/16''
SK309...
Flexcut 6 pc. Mallet Tool Starter Set MC150
This 6 pc. Mallet Starter Set is a good sampling of tools to get started on simpler projects. These tools can be used by hand or can be struck with a mallet and will suit the needs of advanced and novice carvers.
Mallet Tools included: MC403 #3 x 1", MC305 #5 x 11/16", MC208 #7 x 7/16", MC311 #11 x 1/4", MC411 #10 x 9/16", MC360 60 deg. x 3/8".
Flexcut Detailing Power Gouge Set RG310
These Flexcut Detailing Power Gouges are tools for smaller carving and detail.
Can be used by hand with the RG102 Handle Adaptor.
Power Gouges included:
RG305 #3 x 3/8''
RG306 #5 x 5/16''
RG309 #11 x 1/8''
RG307 70 deg. x 1/4''
Flexcut 4 pc. Mallet Tool Sculptor's Set MC175
This 4 pc. Mallet Sculptor's Set are sized for very large stock removal. Their handle diameter and steel caliper are twenty percent larger for heavy duty projects. Carousel carvers, chainsaw carvers and those doing life size statuary will find these tools very fast for knocking out rough shapes or smoothing out large areas. These tools can be used by hand or can be struck with a mallet.
Mallet...
Flexcut Roughing Power Gouge Set RG404
These Roughing Power Gouges are for removing larger amounts of waste wood. Can be used by hand with our RG102 Handle Adaptor.
Power Gouges included: RG400 #3 x 5/8", RG401 #5 x 9/16", RG402 #8 x 3/8", RG403 70 deg. x 3/8".
Flexcut Beginner Palm & Knife Set KN600
The Flexcut beginner palm and knife set is a great way to get started in this rewarding craft. It includes the most popular palm tools and knives from the Flexcut range.
Each tool is supplied razor sharp and ready for use. Set includes: KN12 Cutting Knife, KN13 Detail Knife, FR307 V-Tool and FR306 Gouge.
Flexcut Mini-Palm Set FR604
As the name implies, this Flexcut set was made for miniature carving. Model-makers, as well as those who enjoy carving fine detail, find these tools quite handy. Ranging in size from 1/8-inch down to 1/16-inch, these tools make others seem like crayons when you really need a sharp pencil.
Palm Tools included: FR600 #3 x 1/8", FR601 #5 x 1/8", FR602 #11 x 1/16", FR603 70 deg. x 1/8".
Flexcut Micro-Palm Set FR804
This Flexcut set has been designed for extreme detail used in netsuke or caricature carving. These tools have their edges forged down even thinner than our other palm tools. Cutting with these fine edges allows the carver to work extremely close to adjacent detail without crushing wood fibers that can lead to "chipping out."
Palm Tools included: FR802 #5 x 2.5 mm, FR800 #9 x 1mm, FR801 #9 x...
Flexcut Beginners Palm Set FR310
This very popular Flexcut set is great for those just getting started or those with more experience who like to carve smaller sized projects. The handle fits comfortably in the palm, allowing for good control close to your work. The five profiles can perform a variety of tasks and carve moderate detail.
Palm Tools included: FR308 #2 x 5/16", FR305 #3 x 3/8", FR306 #6 x 5/16", FR309...
Flexcut Wide-Format Palm Set FR404
For those who require the close control of a palm-sized tool but need to remove larger amounts of wood. The low-resistance edge gives them the feel of a narrower tool.
Palm Tools included: FR400 #3 x 5/8", FR401 #5 x 9/16", FR402 #8 x 3/8", FR403 70 deg. x 3/8".
Flexcut Deluxe Palm Set FR405
This Flexcut set is a combination of the FR310 and FR404 palm sets. The regular palm for detail and the wide format for roughing-out makes this a great collection in one convenient box.
Palm Tools included: FR308 #2 x 5/16", FR305 #3 x 3/8", FR400 #3 x 5/8", FR401 #5 x 9/16", FR306 #6 x 5/16", FR402 #8 x 3/8", FR309 #11 x 1/8", FR307 70 deg. x 1/4", FR403 70 deg. x 3/8".
Flexcut Thumbnail Ground Set FR920
These very deep gouges are designed with a parabolic curve. They are designed to be rolled up to 90 degrees and change shape from a deep #11 to a smooth #3 in one continuous cut. The thumbnail grind keeps the corners from digging into the wood as the tool is rolled.
Palm Tools included: FR725 #11X x 3/16", FR925 #11X x 5/16", FR926 #11X x 3/8", FR927 #11X x 1/2".
Flexcut 5' Flexible Draw Knife KN16
This flexible Flexcut draw knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape. The curved edge gives a skew-like cutting action for a low resistance cut. This...
Flexcut 3' Draw Knife KN25
This handy little draw knife by Flexcut was developed for fan carving but works great for skinning small areas of bark and roughing-off corners.
Made in the USA by Flexcut.
Flexcut 1'' Mini Draw Knife KN17
This miniature draw knife by Flexcut is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The flexible shank allows the cutting angle to be changed easily for contoured cuts.
Made in the USA by Flexcut.
Flexcut Slip Strop PW12
The Flexcut SlipStrop™ is an economical way for maintaining a tools razor edge. It has been specially moulded to allow for polishing and deburring the hard to reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Either side of the strop can be used.
Each SlipStrop includes a mini-bar of Flexcut Gold polishing compound and detailed instructions.
Flexcut Knife Strop PW14
This Flexcut Knife Strop has an 8'' by 2'' leather stropping surface, designed exclusively for keeping your knife blades sharp.
Includes Flexcut Gold Polishing Compound.
Flexcut Double Sided Paddle Strop
Flexcut Double Sided Paddle Strop has an 10" by 3" stroppping surface on both sides. The rough leather surface is used in conjunction with the Flexcut Polishing Compound (included), the fine side is a smooth leather surface for final finishing. Ideal for larger tools / blades.
Flexcut Hook Strop PW17
The Flexcut Hook Strop is used to polish the inside edge of any hook knife. The inside edge needs to be polished regularly to keep it razor sharp. The Hook Strop is also used to remove the wire edge that forms after sharpening your hook knives with a Flexcut Hook Hone. A bar of Flexcut Gold Polishing Compound and an instructional guide are also included.
Flexcut Hook Hone PW18
The Flexcut Hook Hone is used to sharpen the inside edge of any hook knife. This sharpening tool used abrasive paper as a more aggressive solution than stropping to remove nicks and scratches from the cutting edge.
Includes 400 and 600-grit abrasive paper and an instructional guide.
Flexcut Gold Polishing Compound PW11
Flexcut Gold™ Polishing Compound has been specially formulated to apply like a crayon.
Its blend of aluminium and titanium oxide provide a balance between aggressive removal of hardened tool steel and offering a high-colour polish.
Flexcut 1/8' (3mm) Scorp KN21
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Flexcut 3/16' (5mm) Scorp KN22
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Flexcut 5/16'' (8mm) Scorp KN23
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Flexcut 70 deg. Scorp KN24
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Flexcut Scorp Set KN150
This Scorp Set puts all of Flexcut's profiles into one handy tool roll. As an added bonus each set includes a specially shaped strop (compound not included) to help maintain the edge of these unusually shaped tools.
Right-handed carvers - choose a right-handed tool to cut towards you - choose a left-handed tool to cut away from you.
Each set includes:
KN21 cutting knife
KN22 detail...
Flexcut Bosch Adaptor SK105
This adaptor is for the BOSCH (SKIL) power carver and accepts all the flexcut SK range of carving tools.
Flexcut Universal Adaptor SK109
This Flexcut Universal Adaptor fits many reciprocating power tools e.g. Proxxon Detail Carver and Automach.
Accepts all Flexcut SK tools.
Flexcut Power Gouge Interchangeable Handle RG102
Allows any RG range reciprocating gouge to be used as a hand tool.
Flexcut 19 Pocket Tool Roll SK200
Keep all your Flexcut tools in one convenient tool roll. Fits 18 unhandled gouges and 1 handle.
Note the tools are not included.
Flexcut JKN06 Leather Jack Knife Sheath
This moulded leather sheath will fit any carving knife in the Flexcut Jack range, such as the Carvin’ Jack, Spoon Jack, Pocket Jack etc.
The sheath has a secure press stud closure and a rear belt loop to take belts up to 45mm wide.
The JKN06 sheath is approximately 125mm high by 50mm wide.
Made in the USA.
Flexcut Scraper Set SK121
These Flexcut scrapers are easy to use (even for children) and come ready to use.
There are 6 different profiles in the set. Once inserted into the handle any side can be used as a scraping edge.
In just a few strokes you can remove any uneven surface or finish from your work without the use of sandpaper. No airborne dust! The scrapers can remove rough areas e.g on hand or power carving or ripple...