Robert Sorby Gilt Edge Chisels - Rosewood
Robert Sorby Gilt Edge Chisels - Rosewood
Gilt Edge chisel with rosewood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
from £41.99 inc VAT
Robert Sorby Traditional Bevel Edged Chisel
Robert Sorby Traditional Bevel Edged Chisel
Traditional "carver" style boxwood handle with brass ferule and leather washer. Overall Size 265 - 340mm Blade Length 127-178mm
from £32.69 inc VAT

Robert Sorby Octagonal Handled Bevel Edged Chisel
Robert Sorby Octagonal Handled Bevel Edged Chisel
Octagonal boxwood handle with brass ferule and leather washer. Overall Size 265 - 340mm Blade Length 127 - 178mm
from £39.79 inc VAT
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
from £40.62 inc VAT

Robert Sorby Thin Bladed Paring Chisel
Robert Sorby Thin Bladed Paring Chisel
Robert Sorby thin bladed paring chisels are traditionally used by pattern makers and now a favourite with cabinet makers, carpenters and joiners. Used for accurate hand paring and fitting without the use of a mallet. Overall Size:- 380-407mm Blade Length 248mm
from £53.78 inc VAT
Robert Sorby Sash Mortice Chisel
Robert Sorby Sash Mortice Chisel
Used for light mortising work, boxwood handle. A 2 degree taper prevents binding in the cut. Ideal for clearing out waste from mortices for tenons, locks and hinges. Can be used with a mallet. Overall Size:- 279mm Blade Length 159mm
from £48.74 inc VAT

Robert Sorby Double Hooped Registered Chisel
Robert Sorby Double Hooped Registered Chisel
Originally it was thought that registered (or shipwrights chisels) were used by barge builders and they first appeared in the mid 19th century. “strong ship” or registered chisels were also described in the Scottish tool manufacturer Mathieson’s catalogue of 1900. More recently these chisels have become very popular with joiners and timber framers for mortising. The double hoops give...
from £37.07 inc VAT
Robert Sorby Framing Chisel
Robert Sorby Framing Chisel
The Robert Sorby Framing Chisel is the same principle as their registered chisel but with a longer blade and handle for deeper morticing work. Overall Size:- 495mm Blade Length:- 267mm
from £63.90 inc VAT

Robert Sorby Bevel Edged Framing Chisel
Robert Sorby Bevel Edged Framing Chisel
Very similar to the RS285 framing chisel that the blade is beveled to give extra clearance in the cut. Tapered along the length. Ash handle. Shorter than the RS285 - 388mm overall length.
from £84.15 inc VAT
Robert Sorby Heavy Duty Corner Chisel
Robert Sorby Heavy Duty Corner Chisel
A heavyweight 1" (25mm) wide bruzz (corner chisel) for cleaning up deep corners of mortises. Ash Handle Overall Size:- 380-407mm Blade Length 239mm
£142.80 inc VAT

Robert Sorby Timber Framer's Slick
Robert Sorby Timber Framer's Slick
This heavy duty timber framers and boat builders slick from Robert Sorby has an offset blade to allow for clearance when working in deep sockets and mortises. It can also be used as a massive paring chisel. Choice of two widths - 2-3/8" (60mm) & 3-3/8" (85mm). Solid one piece forged blade including the heavy tang which is set deep into the handle. A heavy duty socket is fitted between...
from £134.73 inc VAT
Holster for Robert Sorby Timber Framer's Slick
Holster for Robert Sorby Timber Framer's Slick
A quality riveted leather holster for safer carriage of the Robert Sorby Timber Framer's Slick.
from £48.73 inc VAT

Robert Sorby Corner Chisel
Robert Sorby Corner Chisel
Designed for squaring up the ends of mortises, grooves or housings. The faces are precision ground to produce clean, accurate 90 degree angles. Often used nowadays to clean up after a router. Sharpen each face individually with an oil stone. The origins of this tool are from wheelwrights and millwrights who used a v shaped chisel to hollow out mortises in wheels and wooden beams (often referred...
£73.17 inc VAT
Robert Sorby Leather Edge GuardsRobert Sorby Leather Edge Guards
Robert Sorby Leather Edge Guards
We highly recommend edge guards to protect yourself and your tools. The chisel guards are available in 1", 1½" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels. The slick guards are available in 60mm and 85mm sizes suitable for the 289 framer's slicks.
from £7.20 inc VAT

Robert Sorby DrawknifeRobert Sorby Drawknife
Robert Sorby Drawknife
10" cutting edge, ash handled draw knife. Straight back and straight blade with slightly splayed handles.
£90.96 inc VAT
Robert Sorby Framing Chisel Set
Robert Sorby Framing Chisel Set
On of each of the ever popular RS285 Robert Sorby Framing Chisel in 1'', 1 1/2'' and 2''. Overall Size:- 495mm Blade Length:- 267mm
£220.00 inc VAT