Sort By
Per Page
View
Grid
List
Robert Sorby ProEdge Knife Holder Small
The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long.
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Robert Sorby ProEdge Knife Jig Large
This larger knife holder is ideal for hunting knives and knives over 8" long. Both jigs can be adjusted using the collar on the arm to allow for steep and shallow sharpening bevels.
Note - The holders can be used with either the large or small jig, you do not need to buy both jigs.
Robert Sorby ProEdge Knife Jig Small
The knife jig consists of a back plate, raised wear plate, universal arm and knife holder. The kit comes with a set of full instructions. The small knife holder is ideal for pocket knives, carving knives and blades up to 8" long.
Note - The holders can be used with either the large or small jig, you do not need to buy both jigs.
Robert Sorby ProEdge Long Grind Jig
Helps you to create three different fingernail profiles.
Robert Sorby ProEdge Proset
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.
Robert Sorby ProEdge Sharpening System
The ProEdge is a revolutionary sharpening system introduced by Robert Sorby. In fact, the concept is far from new as the ProEdge largely replicates the tool sharpening system which has evolved in the Robert Sorby factory over many, many years. This compact system is now available to woodworkers whether operating in a large workshop or small shed.
Central to the ProEdge is an abrasive belt which...
Robert Sorby ProEdge Skew Jig
The Skew Jig allows the turner to accurately and safely sharpen his skew chisels.
Robert Sorby ProEdge Trizact Belts
Perhaps the most popular in the range of belts. This robust material is designed to handle the demands of all steels. Not strictly 'grit sizes' these belts are built using brick and pyramid abrasive shaping.
The highest 3000 'grit' size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
Robert Sorby ProEdge Zirconium Belts
Designed for HSS tools, drill and router bits this material provides good value.
The 60 grit belt will tackle the most damaged surface. Use the 120 grit to provide a rewarding cutting edge and finish.
Robert Sorby Short Tool Platform with Arm
Increases access when tools are getting old and worn.
Robert Sorby Standard Gouge Jig
Allows easy sharpening of all standard ground woodworking gouges.
Robert Sorby Woodworkers' Square Guide
This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). This jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform.
Ideal for sharpening chisels and plane irons.
Robert Sorby Woodworking Chisel Jig
Accurately ensures a straight cutting edge on any woodworking chisel.
Robin Wood Large Carving Axe
A large head with a long cutting edge, a flat grind for carving and a curvy ergonomic handle. A textured handle gives it beautiful grip in use. This heavier version of the Wood Tools carving axe is ideal for larger work like bowl carving, or for the stronger carver who is looking for something with a bit more power.
The natural wood materials and hand grinding means there will be some aesthetic...
Saburrtooth 1/4' Ball Nose - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Burrs Set - Coarse
This set of burrs from Saburrtooth includes:
14BN14 - Ballnose, head diameter 1/4" and head length 1 3/4"
14F12 - Flame, head diameter 1/2" and head length 3/4"
14S58 - Sphere, 5/8" diameter
14C12 - Cylinder, head diameter 1/2" and head length 3/4"
14T14 - Taper, head diameter 1/4" and head length 1 3/8"
14RS34 - Rotosaw, head diameter 3/4"...
Saburrtooth 1/4' Burrs Set - Fine
This set of burrs from Saburrtooth includes:
14BN14 - Ballnose, head diameter 1/4" and head length 1 3/4"
14F12 - Flame, head diameter 1/2" and head length 3/4"
14S58 - Sphere, 5/8" diameter
14C12 - Cylinder, head diameter 1/2" and head length 3/4"
14T14 - Taper, head diameter 1/4" and head length 1 3/8"
14RS34 - Rotosaw, head diameter 3/4"...
Saburrtooth 1/4' Concave - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Concave - 1/2' x 3/4' (Smooth End)
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Cross Cutter - 1/2'
Shape: Cross Cut Eyecutter
Diameter: 1/2''
Head Length: 1/2
Saburrtooth 1/4' Cross Cutter - 3/4'
Shape: Cross Cut Eyecutter
Diameter: 3/4''
Head Length: 3/4
Saburrtooth 1/4' Cross Cutter 1'
Shape: Cross Cut Eyecutter
Diameter: 1''
Head Length: 1"
Saburrtooth 1/4' Cylinder - 1' x 1'
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4' Cylinder - 1' x 1' - (Radius End)
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4' Cylinder - 1' x 1' - (Smooth End)
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4' Cylinder - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Cylinder - 1/2' x 3/4' - (Smooth End)
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Cylinder - 3/8'' x 3/4''
Head Diameter: 3/8"
Head Length: 3/4"
Saburrtooth 1/4' Flame - 1/2' x 3/4'
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4' Flame - 3/8' x 3/4'
Head Diameter: 3/8"
Head Length: 3/4"
Saburrtooth 1/4' Rotosaw - 1' x 1/4'
Head Diameter: 1"
Head Length: 1/4"
Saburrtooth 1/4' Rotosaw - 3/4' x 1/4'
Head Diameter: 3/4"
Head Length: 1/4"
Saburrtooth 1/4' Sphere - 1/2' x 1/2'
Head Diameter: 1/2"
Head Length: 1/2"
Saburrtooth 1/4' Sphere - 5/8' x 5/8'
Head Diameter: 5/8"
Head Length: 5/8"
Saburrtooth 1/4' Sphere 1' x 1'
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4' Taper - 1/2' x 1'
Head Diameter: 1/2"
Head Length: 1"
Saburrtooth 1/4' Taper - 1/2' x 1' - (Smooth End)
Head Diameter: 1/2"
Head Length: 1"
Saburrtooth 1/4' Taper - 1/4' x 1-3/8'
Head Diameter: 1/4"
Head Length: 1-3/8"
Saburrtooth 1/4'' Ball Nose - 1/2'' x 2'
Saburrtooth 1/4" Ball Nose - 1/2" x 2" is available in extra fine (whisper white), fine (yellow), coarse (green) and extra coarse (orange).
Head Diameter: 1/2"
Head Length: 2"
Saburrtooth 1/4'' Ball Nose - 1/4'' x 1 3/4''
Head Diameter: 1/4"
Head Length: 1¾"
Saburrtooth 1/4'' Ball Nose 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4'' Cylinder - 1/4'' x 1 3/4''
Head Diameter: 1/4"
Head Length: 1¾"
Saburrtooth 1/4'' Cylinder - 1/4'' x 1 3/4'' - (Smooth End)
Head Diameter: 1/4"
Head Length: 1¾"
Saburrtooth 1/4'' Cylinder 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4'' Cylinder 3/4'' x 1 1/4'' (Smooth End)
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4'' Dove Tail 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4'' Dove Tail 3/4'' x 1 1/4'' (Smooth End)
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/4'' Flame 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"