Sort By
Per Page
View
Grid
List
Shinwa Ink Line (Sumitsubo)
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob.
No ink is included.
Body length 180 mm, thread length 20 m.
New design (shiny new colours!)
Shinwa Mini Ink Line + Black Ink
Professional quality, compact Sumitsubo.
Body 130 mm, line length 15 m.
Includes 200ml black ink.
New design (shiny new colours!)
Shinwa Ink Line (Sumitsubo) + Black Ink
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob.
Includes 200ml black ink.
Body length 180 mm, thread length 20 m.
New design (shiny new colours!)
Liquid Ink 200ml - Black
For Sumitsubo and Sumisashi, it is water soluble.
Liquid Ink 200ml - Red
For Sumitsubo and Sumisashi, it is water soluble.
Shinwa Protractor No.184 Chrome Finish
Center lock nut has a needle built-in so that it can be pushed to create a mark.
Measures 0 - 180° with a reverse scale.
150mm stainless steel blade with a hard chrome coating for easy reading (and a 100mm scale).
90mm wide body.
Shinwa Protractor No.19 Chrome Finish
Measures 0 - 180° with a reverse scale.
150mm stainless steel blade with a hard chrome coating for easy reading (and a 100mm scale).
90mm wide body.
Starrett Bevelled Steel Straight Edge 24'/600mm
The Starrett 385 Series Steel Straight Edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle.
Veritas Aluminium Straightedges
These anodized aluminium straight edges are 1¾" high and 7/16" wide, and will not rust. The reference edge is machined flat to within 0.003" over the entire length. They are available in three lengths, 24", 38" and 50". The 24" straight edge weighs 1lb, the 38" weighs just under 2lb, and the 50" version weighs 2.5lb.
Veritas Steel Straightedges
Shop accuracy begins with a benchmark straightedge as a surface reference. These Canadian-made Veritas precision steel straightedges are ground flat over the entire length on both edges, the 24" lengths to within 0.0010" and the 36" length to within 0.0015". All have been stress relieved to remain true under temperature variation. Useful for checking whether surfaces are flat or...
Veritas Ruler Stop
The Veritas ruler stop increases the usefulness of a metal ruler by providing a solid reference point. It is ideal for setting saw fences, repeat cuts, etc.
To use, slide the stop over the ruler end and tighten it at the desired position. The notched post at the tip of the brass adjustment screw allows even the thinnest rulers to be clamped securely; it will not mar the ruler edge. Repositioning...
Crucible Pinch Rods
Please Note: Wood is not included.
While there are many ways to determine if an assembled carcase is square, the easiest method is to use “pinch rods” to compare the corner-to-corner measurements.
Unlike using measurements to compare the diagonals, pinch rods do not depend on reading and remembering dimensions. So they are much less prone to error. Also, pinch rods allow you to bring...
Veritas Trammel Points
Usable on any rule up to 1/4" thick, these narrow-bodied trammels can be set to reproduce radii as little as 9/16". The removable points score clear lines on any wood, and are also effective on aluminium, brass, bronze and mild steel. With the points removed, the trammel bodies double as square gauges, clamping onto a square to make repetitive angle marking easy. Inspired by an antique trammel...
Pencil Tip & 10 Leads for Veritas Trammel Points
This pencil tip can replace either of the stainless-steel tips on the Veritas trammel points or the Veritas beam compass. It holds an included 2mm thick, 25mm long HB lead that marks a dark line and holds a bevel edge well. Ten additional pencil leads are included.
Made of durable and corrosion-resistant stainless steel with knurled sections to make them easy to remove. Pencil tips measure about...
Veritas Beam Compass
A beam compass (or trammel) offers longer reach and easier adjustment than an ordinary compass. This updated beam compass is made largely of stainless steel, providing it with improved toughness and rust resistance, not to mention a more modern look.
The beams have threaded ends that let you link them together for longer reach. Just the base section of the beam compass deals with circles from...
Veritas Beam Compass Heads
Using a regular compass for small circles is OK, but for projects involving large circles or arcs, our beam compass heads are ideal.
The aluminium heads clamp onto a piece of wood between 5/8" and 3/4" thick, creating a compass whose radius is limited only by the length of stock you have at hand. Each brass clamping knob holds the head securely to the beam using a trapped pin that prevents pivoting...
Veritas Bar Gauge
Using a bar gauge lets you directly transfer and compare dimensions without conversion to numbers, reducing the chance of transcription errors. You can even use it to quickly test an assembly for squareness by checking that the diagonals are equal.
The base unit consists of two 6" steel rods fixed to aluminium clamp heads. The rods have threaded end holes that accept interchangeable brass...
Veritas Bar Gauge 12'' Extension Rods
This pair of 12" extension rods can be used to extend the reach of the Veritas bar gauge, Veritas beam compass, or Veritas marking and transfer tool.
It can also be used with the fence and center kit for the Veritas plunge base for rotary tools or the fence and center kit for compact routers, in order to extend the reach of the fence. The rods have a male thread at one end and a female thread...
Veritas Bar Gauge Heads
Compares measurements e.g. equal diagnosis in drawers.
Transfers dimensions without converting into numbers.
Can be used for sizing shelves or interior trim on windows.
Gauge head openings are 13 x 19mm, rip 6mm slices to make bars (wood not included).
Crucible Chairpanzee Analog Computer
Chairmaking is complex enough without having to worry about the trigonometry used to calculate the drilling and sighting angles for a chair’s legs and spindles.
The Chairpanzee does all the maths for you with its simple, no-maths-needed interface. Simply slide the tool’s interior card so the splay you desire appears in its top window. Choose the rake you wish in the window below. The...
Joseph Marples Trial 1 - Presentation Set
TRIAL 1 - The mark of highest quality
This small selection of Joseph Marples tools represents the very best quality that they produce. They are based on designs of the tools last made over 70 years ago, which carried the 'TRIAL 1' brand, or Corporate Mark. The squares have 1/8th inch thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside...
Lost Art Press - 5 Woodworking Pencils
Traditional school pencils aren't ideal for woodworking. The pencils and lead snap too easily in use. And the eraser is a joke (Lost Art Press have a recommendation below).
After Lost Art Press tested many different combinations of lead (called the “core”) and diameters, this pencil became their shop favourite. It is robust because of its diameter and the fact that it is round....
Pentel Graphgear 1000 Automatic Pencil 0.7mm
We were first put onto these little beauties by Jaap Bosma (the taller half of Mappa Tools). Jaap was taking all the credit for uncovering the mechanical pencil, until we stumbled upon a blog from Christopher Schwarz and that they'd been on the market for almost a couple of decades! Anyway, a few years later and the dynamic buying department of CHT sprung into action and finally started to stock...
Pentel Graphgear 1000 Automatic Pencil 0.9mm
We were first put onto these little beauties by Jaap Bosma (the taller half of Mappa Tools). Jaap was taking all the credit for uncovering the mechanical pencil, until we stumbled upon a blog from Christopher Schwarz and that they'd been on the market for almost a couple of decades! Anyway, a few years later and the dynamic buying department of CHT sprung into action and finally started to stock...
Veritas Centre Marker
The Veritas centre marker is used for marking the centre of any square or round piece up to 6" across.
Ideal for marking work removed from a lathe after waste ends have been removed. This accurate centre marker is a precision aluminium die casting with a steel scoring blade.
Easy to use, set the material in the marker, tap it and rotate a quarter turn and tap again, the result is two scoring...
Veritas Set-Up Blocks - 9 Piece Metric Set
Setting up machines in the shop can be a frustrating and inaccurate undertaking. Tape measures and rulers are difficult to use when measuring gaps between curved bits and guide fences. Worse, machines often require two hands to adjust, leaving nothing to hold the measuring tool. The Veritas set-up blocks help solve this problem. Simply place the appropriate block or combination of blocks between the...
Veritas Transfer Log Scribe
Can be used with 2 pencils for double scribing and the hardened steel pin can be used on one leg for smooth scribing.
Fully adjustable from 0-300mm. Calibrated so that any opening can be used once the double bubbles are set for a given pencil & pin projection.
Curved pin tip has rounded end for smooth scribing and straight tip is sharp pointed for compass work.
Includes indelible pencil...