Sort By
Per Page
View
Grid
List
Veritas Wooden Plane Hardware Kit + PM-V11 Blade
With this kit (and basic woodworking skills) you can build a bevel-down wood-bodied smooth plane with a Norris-style mechanism for easy depth and lateral adjustment.
The kit includes a blade, a Norris-style adjuster with a steel cup to seat it in, plus a knob, tapped insert and cross pin for the lever cap, all made of brass. The lapped PM-V11 blade is 1/8" thick and 1 5/8" wide with...
Accesories for Veritas Dowel & Tenon Cutters
Use the 1/2" drive socket for the 3/8" & 7/16" sizes.
The 5/8" drive socket for the 1/2" dowel.
The four-sided square sockets have a 3/8" square-drive end. The socket adaptor has a 1/4" hex shank.
Dowel Cutters made in Canada. Patented.
Accessories for the Veritas Wood Carver's Vice
Accessories for the Veritas Wood Carver's Vice:
Dog Hole Mount Assembly:
The vice can be side or top mounted through any standard 3/4" dia. dog hole using the auxiliary rod/sleeve/wing-nut assembly, usable on benches from 5/8" to 4" thick.
3 1/2" Mounting Plate:
3-1/2" dia. by 1/2" thick mounting plate with a steel rod.
2" Mounting Plate:
For mounting smaller pieces, such as duck heads or bird...
5 1/2'' Post for Veritas Bench Hold Down
This 5 1/2" Post is for the Veritas Bench Hold Down, for holes where through travel is limited.
At just 5-1/2" long, it provides about 4" of clamping capacity.
Patented.
Blade for the Veritas Small Scraping Plane
Replacement blade for the Veritas Small Scraping Plane 05P2950.
Blade for Veritas Flat & Round Spokeshaves
Replacement PM-V11 blade to fit both the Veritas Flat (05P3373) and Round (05P3374) Spokeshaves.
Blade for Veritas Low-Angle Spokeshave
Replacement PM-V11 blade to the Veritas Low-Angle Spokeshave (05P3273).
Blade for Veritas Skew Rebate Plane
Replacement PM-V11 blade to fit the right hand Veritas Skew Rebate.
Blades for the Veritas Detail Palm Planes
Replacement blades for the Veritas detail palm planes. (Convex and double-convex planes use the same blade.)
Long Rod for Veritas Skew Block Plane
This optional 3 1/2" stainless-steel fence rod is 1 1/8" longer than the 2 3/8" rod supplied with the Veritas skew block plane to let you add a thicker fence extension (e.g., a tapered spacer for angled cuts) without restricting cutting width.
Made in Canada.
Replacement Blade for Veritas Cabinetmakers Trimming Plane
Replacement lapped O1 steel blade for the Veritas Cabinetmaker's Trimming Plane. Hardened to Rc58-60.
Made in Canada.
Leather Sheath for the Veritas Hacking Knife
Hacking Knife sold separately.
Long Rods for Veritas Skew Rabbet
Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1½".
Prices include VAT
Muzzles for Veritas Bench Dogs & Pups
For clamping a finished piece without marking it, the slip-resistant muzzles slide over the Bench Dogs (or Bench Pups) to give you a non-marring surface. They have a hard, spring-grip, plastic body with six face ribs.
Available in two sizes: 1¼" long for Bench Dogs or 3/4" long for Bench Pups. Sold in pairs.
Optional Depth Stop for Veritas Skew Block Plane
For use with the skew block plane, this depth stop lets you finish cuts at a precise depth.
The cast zinc-aluminum alloy arm is held in place by the front knob. The steel shoe is adjustable from flush to a maximum depth of 5/8" and has relieved edges to avoid marking your work.
Made in Canada.
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes.
Made in Canada.
Replacement Blade for Veritas Power Tenon Cutters
This replacement blade is for Veritas Power Tenon Cutters and it fits all sizes.
Pencil Tip & 10 Leads for Veritas Trammel Points
This pencil tip can replace either of the stainless-steel tips on the Veritas trammel points or the Veritas beam compass. It holds an included 2mm thick, 25mm long HB lead that marks a dark line and holds a bevel edge well. Ten additional pencil leads are included.
Made of durable and corrosion-resistant stainless steel with knurled sections to make them easy to remove. Pencil tips measure about...
Replacement Blades for Veritas Chair Devils
These high-carbon steel replacement blades are for use with the Veritas Chair Devils. At 0.040'' thick, they are hardened to Rc48-52 and come with a finely ground 45° cutting edge.
Replacement Blade for Veritas Scraper Shave
This high-carbon steel replacement blade is 0.040'' thick and hardened to Rc48-52, with a 45° cutting edge that can be readily burnished to create a long-lasting hook.
Made in Canada.
Replacement PM-V11 Blade for the Veritas Shop Knife
Made of PM-V11 tool steel , this replacement blade for the Veritas Shop Knife is 3/32" thick and about 3/8" wide with a 55° spear-point tip. Ground to a keen edge at a 25° bevel angle.
Replacement Tip for Veritas Japanese Style Awls
The replacement tip for the Veritas Japanese-Style Awls is A2 steel hardened to Rc60-62 for toughness.
Spare Blades for the Veritas Detail Rabbet Planes
The lapped replacement blades for the Veritas detail rabbet planes are made of O1 tool steel.
Replacement Carbide Rods for Veritas Scraper Burnisher for Turners
Replacement 5° and 10° carbide rods for the Veritas Scraper Burnisher for Turners.
Spare Blades for the Veritas Scrub Plane
Available in high-carbon steel (Rc58-60) or PM-V11 steel (Rc61-63). The blade edge is ground with a 3" radius, so it takes an aggressive cut.
Spare Blade for Veritas Edge-Trimming Plane
Replacement blade for the Veritas Edge-Trimming Plane. 1/8" thick, 1 1/4" wide replacement blades in PM-V11 steel work wood up to 1" wide.
Made in Canada.
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Replacement PM-V11 blade for the Veritas bullnose shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Small Shoulder Plane
Ensure your Veritas Small Shoulder Plane continues to deliver exceptional results with this premium PM-V11 replacement blade. Known for its outstanding durability and ability to maintain a razor-sharp edge, the PM-V11 steel blade is the perfect upgrade for those who demand the highest performance from their tools.
Key Features:
Premium Material: Crafted from PM-V11 steel, known for its superior...
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
Veritas 2 1/4'' Blades for Bevel-Up and Low-Angle Bench Planes
2 1/4" blades that fit the Veritas Bevel-Up Smoother, Low-Angle Jack, Bevel-Up Jointer. Also fits the Shooting Board Plane (25° bevel).
Veritas Left Handed Blades for Small Plough & Box-Maker's Plough
For the Veritas Left Handed Plough and Left Handed Box-Maker's Plane.
Replament Blade for Veritas Pullshave
A replacement PM-V11 blade for the Veritas Pullsahve.
Veritas Flushing Chisel Roll
Made of black cotton canvas, this chisel roll holds four Veritas flushing chisel blades and one handle.
Honing Compound, 6.0 oz
The Veritas honing compound, which took over two years to develop, is the most effective on the market.
It is a blend of both chromium and aluminium oxide to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather or wood.
Cuts quickly but leaves a mirror finish with a light wax film. The average...
Veritas Router Plane Storage Box
Veritas designed this case to hold their Veritas large router plane, along with various blades and accessories, keeping everything organised, accessible and portable.
It’s made from sturdy 9mm thick Baltic birch plywood, precisely milled with snug dado joints and a clear acrylic sliding lid. The plane nests in a shallow recess in the floor of the box, and holes in a rail along the back wall...
Veritas Mini Tenon Cutters
Veritas developed these smaller-diameter tenon cutters for use with small stock.
Available in six cutting diameters from 1/4'' to 9/16''. The 9/16'' tenon is the size used historically for chair rungs. The other sizes (1/4'' to 1/2'') are useful in many areas, e.g., members within trellis or lattice work.
All sizes have a straight blade that cuts a 60°...