Veritas Low-Angle Block PlaneVeritas Low-Angle Block Plane
Veritas Low-Angle Block Plane
Veritas have made a block plane that uses a "Norris" style combined sideways (lateral) and up and down adjustment which gives you greater control when adjusting its impressive 1/8" thick by 1 5/8" wide PM-V11 or O1 blade. This plane also overcomes one of the drawbacks of other block planes in having higher side wings (ideal for shooting) with multiple finger grips in each side....
£194.00 inc VAT
Veritas DX60 Block PlaneVeritas DX60 Block Plane
Veritas DX60 Block Plane
This Veritas DX60 block plane is one of the finest planes that Veritas have ever made. 4 years of design work culminates in a superb plane made to exacting standards and featuring newly refined stainless-steel hardware. The knob and wheel have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an...
from £214.00 inc VAT

Veritas Apron Plane + PM-V11 Blade
Veritas Apron Plane + PM-V11 Blade
This small, low-angle block plane from Veritas is the answer to a trim carpenter's prayers. At only 14oz it is half the weight of a standard block plane, a significant factor if you want to carry it with you all day. The 5½" long, tough ductile cast iron body will take job-site accidents in stride. This is not a plane body that will break when dropped. It has good hand feel; the unique side...
£121.00 inc VAT
Veritas Standard Angle Block Plane + PM-V11 Blade
Veritas Standard Angle Block Plane + PM-V11 Blade
This is the standard angle version of the Veritas low angle block plane. Preferred for general-purpose work, the 20° bed angle plus the 25° bevel angle on the bevel-up blade result in an effective cutting angle of 45°, the same as found in most bench planes. A low-profile lever cap results in a plane that fits the hand well, at only 1/8" higher than its low-angle sibling. Mechanically,...
£174.00 inc VAT

Veritas Pocket Plane + PM-V11 Blade
Back In Stock
Veritas Pocket Plane + PM-V11 Blade
The Veritas Pocket Plane at just 4½" long and 1¼" wide overall, and weighing just less than 11oz, is aptly named - it's small and light enough to carry in an apron pocket all day. Designed with a bevel-up configuration and a fully functional combined feed and lateral adjustment mechanism, it has a finer cutting action than you might expect from such a small tool. This makes it admirably suited...
£101.00 inc VAT
Veritas Skew Block PlaneVeritas Skew Block Plane
Veritas Skew Block Plane
The Veritas Skew Block Plane is a versatile plane that excels at trimming rebates and planing end grain. Of course, you can also use it as a normal block plane. Its Norris-style adjuster guarantees precise blade setting. Machined and surface ground, the 162 x 44mm body is ductile cast iron. It has a 12° bed angle and a movable toe fully enclosed by the body casting. A Bubinga knob locks the toe...
£271.00 inc VAT

Veritas Miniature Low Angle Block Plane
Veritas Miniature Low Angle Block Plane
This version of the Veritas low-angle block plane is about a third the size of the original. At just under 2½" long and ¾" wide, it is a useful size for small-scale work or where a larger plane would be difficult to use. The low 12° bed angle combined with the 25° blade bevel gives it a cutting angle of 37°, making it also suitable for end-grain use. The stainless-steel Norris-style adjuster...
£48.60 inc VAT
Veritas No 1 Bevel Up Plane PMV11 BladeVeritas No 1 Bevel Up Plane PMV11 Blade
Veritas No 1 Bevel Up Plane PMV11 Blade
This Veritas bevel-up version of a No.1 bench plane has a sole measuring only 45mm wide and 148mm long. Size wise very similar to a block plane and like a block plane, light enough to use single-handed. This is a super bench plane for small-scale work. It features a Norris-type adjuster for easy, accurate blade setting, and guide screws to center and fix the blade. The adjustable mouth can be closed...
£229.00 inc VAT

Veritas Bevel-Up Jointer Plane
Veritas Bevel-Up Jointer Plane
The Veritas low-angle jointer is the largest member of the Veritas bevel-up bench plane family. At 22" x 2.7/8" and weighing 7½lb, it is the answer for jointing edges and flattening large panels. The bevel-up blade configuration results in a plane that is versatile and straightforward to use. The 12° bed angle, coupled with the 25° blade bevel, creates an effective cutting angle of 37°. Simply...
£350.00 inc VAT
Veritas Low-Angle Jack PlaneVeritas Low-Angle Jack Plane
Veritas Low-Angle Jack Plane
The Veritas® low-angle jack plane is an exceptionally versatile plane. It excels at end grain work, is great for shooting, and also works well for smoothing. With the optional high-angle blade, it is also the answer for working difficult grain, making it a well-rounded workhorse. Veritas have designated it as a 62½ because of its generous size, heavier weight, low center of gravity and radically...
£328.00 inc VAT

Veritas Bevel-Up Smoother Plane
Veritas Bevel-Up Smoother Plane
The latest addition to the Veritas family of low-angle bench planes is the state-of-the-art pure smoothing plane. It is the plane to use for the final finish on surfaces, especially woods of difficult grain patterns. It also complements the low-angle jack plane. Veritas have combined the generous width and weight of a dedicated smoother with the versatile inner workings of a low-angle bevel-up...
£293.00 inc VAT
Veritas Low-Angle Smoothing PlaneVeritas Low-Angle Smoothing Plane
Veritas Low-Angle Smoothing Plane
The Veritas low-angle smooth plane has three key uses. It is used to smooth large surfaces, preferably taking a diagonal cut, partly across and partly along the grain. Similarly, with its generous sides, it is ideal for shooting mitres. Finally, it is excellent for end-grain work. The low cutting angle of 37° minimizes fibre tearing. With a bed angle of 12°, this is a "bevel-up" plane, like a low-angle...
£265.00 inc VAT

Veritas Small Bevel-Up Bench PlaneVeritas Small Bevel-Up Bench Plane
Veritas Small Bevel-Up Bench Plane
This Veritas low angle smoother is 225mm long, 59mm wide and weighs only 1.25kg. It is easier to handle than a full size smoother. Think of it lying somewhere between a large block plane and a full size smoother, then you’ll see just how useful this plane can be. Like a full size version, it is useful for final finishing of surfaces, end-grain work and for shooting mitres. The ductile cast...
£246.00 inc VAT
Veritas Miniature Bevel-Up Jack PlaneVeritas Miniature Bevel-Up Jack Plane
Veritas Miniature Bevel-Up Jack Plane
This fully functional 1:3-scale version of Veritas' low-angle jack plane is the latest in their line of miniature tools. At 5" long and almost 1" wide, it weighs just over 4 oz, a useful size for fine trimming work. It has a 3/4" wide A2 blade with a 25° bevel angle and a 13° bed angle. The stainless-steel Norris-style adjuster lets you set the blade with precision. The body is made from investment-cast...
£70.40 inc VAT

Veritas Miniature Bench PlaneVeritas Miniature Bench Plane
Veritas Miniature Bench Plane
This 1/3 scale version of the Veritas small bevel-up smooth plane is only 3½" long and 13/16" wide. Fully functional, it has a 5/8" wide A2 blade (0.06" thick) with a 25° bevel angle that, together with the 13° bed angle, provides an effective cutting angle of 38°. The stainless-steel Norris-style adjuster lets you set the blade with precision. The body is made from investment-cast stainless...
£53.70 inc VAT
Veritas Large Shoulder Plane + PM-V11 BladeVeritas Large Shoulder Plane + PM-V11 Blade
Veritas Large Shoulder Plane + PM-V11 Blade
The Veritas® large shoulder plane (a specialized rabbet plane) is the latest and largest in our line of shoulder planes. Its size and mass make it perfect for trimming breadboard tenons, adjusting shoulders, or even paring down tenon cheeks. At 8¼" long, 1¼" wide and weighing 3¾ lb, it brings both authority and precision to larger work. The ductile cast iron body is accurately machined and ground...
£244.00 inc VAT

Veritas Medium Shoulder Plane + PM-V11 BladeVeritas Medium Shoulder Plane + PM-V11 Blade
Veritas Medium Shoulder Plane + PM-V11 Blade
The shoulder plane (a specialized rebate plane) is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for trimming the shoulder of a tenon to perfection or for rebating work. The Veritas® medium shoulder plane is proportioned for versatility; it measures 7" long by 0.700" wide and weighs 2 lb. The ductile cast iron body is accurately machined and ground so that...
£210.00 inc VAT
Veritas Small Shoulder Plane + PM-V11 Blade
Veritas Small Shoulder Plane + PM-V11 Blade
Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip. The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest for the palm. The through-hole and textured recesses cast into the side of the body provide grip points for fingers. The...
£199.00 inc VAT

Veritas Bullnose Shoulder Plane + PM-V11 Blade
Veritas Bullnose Shoulder Plane + PM-V11 Blade
The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own. Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking knob to remove the toe piece for chisel plane configuration, and you can work right up to a blind corner. An adjustable...
£195.00 inc VAT
Veritas Detail Rabbet PlaneVeritas Detail Rabbet Plane
Veritas Detail Rabbet Plane
The detail rebate plane is primarily useful for small trimming tasks. It is handy for getting into tight spaces, especially cleaning up the bottom of dados or grooves. The plane’s body is ductile cast iron, 75mm long, accurately machined and ground. The sides are flat and square, allowing you to use the plane on its side for trimming tenons. The low 15-degree bed angle combined with the 30-degree...
from £60.00 inc VAT

Veritas Jack Rebate Plane with PM-V11 Blade
Veritas Jack Rebate Plane with PM-V11 Blade
This Veritas Jack Rebate plane cuts large-scale rebating down to size. The body is 385mm long and the blade extends the full width (57mm) of the body. It is suitable for very large rebates and fielded or bevelled panels. The long sole and substantial mass help ensure accuracy. The 4.8mm thick bevel-up blade makes right or left-handed corner cuts cleanly and accurately. Adjustable scoring spurs...
£374.00 inc VAT
Veritas Side Rabbet Plane
Veritas Side Rabbet Plane
The Veritas Side Rabbet Plane is used for cleaning up or trimming sidewalls of rabbets, dadoes or grooves to yield a perfect fit with its mate. It has a practical dual-blade configuration, coupled with an ingenious pivoting handle that permits right- or left-hand use to accommodate grain direction. The thin sole functions much like a skate, allowing use in slots as narrow as 3/16" and to a depth...
£126.00 inc VAT

Veritas Skew RabbetVeritas Skew Rabbet
Back In Stock
Veritas Skew Rabbet
Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts are clean and accurate. Adjustable in two axes (vertical and horizontal) for depth and projection, the scoring spur sits...

5

£278.00 inc VAT
Veritas Hand JointerVeritas Hand Jointer
Veritas Hand Jointer
The Veritas Hand Jointer allows you to accurately joint small parts by hand. Box-making and modelmaking often require small parts that are too dangerous to run through a power jointer and difficult to joint with a hand plane; balancing a plane on pieces much smaller than its sole can be awkward. This hand jointing accessory for Veritas medium and large shoulder planes lets you bring the work...
£50.98 inc VAT

Veritas Miniature Shoulder Plane
Veritas Miniature Shoulder Plane
Weighing a mere 1.7 oz and measuring 2-1/2" long by 1/4" wide, this miniature version of the Veritas medium shoulder plane was developed out of a desire to test the limitations of their materials, design, and manufacturing processes (not to mention the patience of their engineers!). Despite its diminutive size, it is fully functional and remarkably effective for fine trimming or cleaning the bottoms...
£46.00 inc VAT
Veritas Router PlaneVeritas Router Plane
Veritas Router Plane
Veritas Router Plane
£171.00 inc VAT

Veritas Medium Router PlaneVeritas Medium Router Plane
Veritas Medium Router Plane
Slightly larger than the Veritas small router plane, this tool has the advantage of using the same blades as our full-size router plane. For general use, the blade may be positioned inboard with the sole encircling it for maximum registration on the workpiece, even when approaching from the side or working an edge. This allows it to bridge recesses, providing great stability even on narrow stock....
£111.00 inc VAT
Veritas Small Router PlaneVeritas Small Router Plane
Veritas Small Router Plane
The Veritas Small Router Plane is a versatile tool for fine work, particularly on narrow material or in confined areas, this small router plane is invaluable for any task requiring small recesses, grooves or dadoes. The sole is designed to completely encircle the blade when in the closed-throat position for maximum registration to the workpiece, even when approaching from the side or working...
£44.90 inc VAT

Veritas Miniature RouterVeritas Miniature Router
Veritas Miniature Router
This 75mm wide router plane not only looks like its full-size counterpart, it works like it too. Comfortable to hold and manoeuvre, it is ideal for hardware installation, fine inlay or intarsia work. It comes with a 3.2mm wide A2 tool-steel blade (hardened to HRC 60-62), positioned inboard for standard use or outboard for true bullnose work. The carefully machined stainless steel body has a ground...
£48.60 inc VAT
Veritas Fence for Large Router Plane
Veritas Fence for Large Router Plane
A very popular addition to the Veritas large router plane. Can be positioned on either side of the plane and will work on both straight and curved pieces.
£25.00 inc VAT

Veritas Wide Router Plane BladesVeritas Wide Router Plane Blades
Veritas Wide Router Plane Blades
These high-carbon steel router plane blades will fit the Veritas large and medium router planes, and the the Veritas hinge mortise plane, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in five Imperial sizes The 1/2" blades have a two-piece design and are available in two styles: straight and spear-point (for final...
from £4.88 inc VAT
Veritas Narrow Router Plane BladesVeritas Narrow Router Plane Blades
Veritas Narrow Router Plane Blades
These high-carbon steel router plane blades fit the Veritas large and merdium router planes, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in both metric and imperial sizes. Please note that Veritas do not produce a 3mm and a 1/8" blade, they consider them close enough in size so we only advertise the 1/8". Sizes...
from £19.00 inc VAT

Veritas Replacement 1/4' Blade for Small Router
Veritas Replacement 1/4' Blade for Small Router
Veritas Replacement 1/4" wide high-carbon steel blade for the . Made in Canada.
£10.30 inc VAT
Veritas Inlay Cutter Head for Router PlaneVeritas Inlay Cutter Head for Router Plane
Veritas Inlay Cutter Head for Router Plane
This simple attachment for a lets you score a shallow groove to accept inlaid purfling, banding or stringing, taking advantage of the plane’s fence and depth-adjustment mechanism to precisely control groove position and depth. The cutter head holds a pair of included single-bevel slicing blades that score crisply defined groove outlines across, with or diagonal to the grain. By using a chisel...
£62.50 inc VAT

Veritas Shooting PlaneVeritas Shooting Plane
Veritas Shooting Plane
The mass of this Veritas Shooting Plane, its long base and low centre of gravity make it both stable and effective. Tipping the scales at just over 3.5kg and just under 400mm long, it is a substantial plane; you will appreciate the authority it provides when shooting. The body is fully stress-relieved, ductile cast iron, with a sole and running surface machined flat and square to one another;...
£389.00 inc VAT
Veritas Shooting BoardVeritas Shooting Board
Veritas Shooting Board
The 24" long shooting track fits the Veritas shooting plane. This is a shooting board that doesn’t limit you to one angle, the fence is adjustable to let you shoot up to 60° from square. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly set the fence for square angles as well as miter cuts to produce frames with ten,...
£240.00 inc VAT

Veritas Shooting Board Fence
Veritas Shooting Board Fence
The Veritas Shooting Board Fence Kit lets you construct a shooting board that doesn’t limit you to one angle – the fence is adjustable to let you easily shoot mitres of various angles. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly adjust the fence to shoot square angles as well as mitres for frames with ten, eight,...
£110.00 inc VAT
Veritas Shooting Board TrackVeritas Shooting Board Track
Veritas Shooting Board Track
These are straight, durable aluminium tracks for making your own shooting board. They fit the Veritas Shooting Plane (above), and any other plane with a running surface between 2-1/32" and 2-1/4" wide; you can adjust the stainless-steel outer rail for a perfect fit. Set screws keep the rail from shifting in use. The inner rail is 11/64" tall. Low-friction UHMW strips in the bottom...
from £47.70 inc VAT

Veritas Combination Plane
Veritas Combination Plane
Originally created to replace stacks of hollow and round wooden planes, combination planes are defined by their flexibility. The Veritas® Combination Plane is no exception; only this one is designed with better adjustment and feed mechanisms for easy and accurate blade setting, and incorporates features to prevent blade vibration, making it reliable in use. It will tackle fundamental joinery,...
£429.00 inc VAT
Veritas Combination Plane Box
Veritas Combination Plane Box
This storage box provides a place to keep the assembled plane, the second pair of fence rods and up to two of the blade boxes. Slots in the sides of the box base act as rests for the fence rods, holding the plane upright. The top of the box fits into channels in the box base, locking the plane in position as well as securing other contents. Made in Canada from Baltic birch plywood, the box is...
£54.70 inc VAT

Veritas Small Plough PlaneVeritas Small Plough Plane
Veritas Small Plough Plane
This is Veritas' redesigned small plough plane. While it still excels at cutting grooves, rabbets and tongues, it now has the ability to cut decorative beading (beading blades available soon). Closest in size to the classic Record #044 plane, the preferred size of the old-style plough planes, it has a 6-5/8" long fence that registers solidly to the workpiece and is through-drilled to...
from £218.00 inc VAT
Veritas Small Plough Plane Conversion KitVeritas Small Plough Plane Conversion Kit
Veritas Small Plough Plane Conversion Kit
An excellent way to extend the functionality of the Veritas Small Plough Plane, this conversion kit allows the plane to accommodate our tongue-cutting blades as well as our straight blades over 3/8" wide. Designed to clamp and support both sides of the cutter to prevent twisting in use, the kit is composed of a 5" long machined ductile iron skate with a brass locking knob and a parallel adjustment...
£43.40 inc VAT

Veritas Blade Storage BoxVeritas Blade Storage Box
Veritas Blade Storage Box
This blade box holds the blades for the combination plane or small plow plane, displaying them edge up so you can easily pick the one you need. Made of Baltic birch plywood, it holds blades side by side in two 6" long rows. Because the width of the blades determines how many fit in the box, the number of blades you can store depends on which blades you own. However, all the new blades for the combination...
£20.20 inc VAT
Veritas Tongue-Cutting Blades for Combination & Small Plough PlanesVeritas Tongue-Cutting Blades for Combination & Small Plough Planes
Veritas Tongue-Cutting Blades for Combination & Small Plough Planes
All blades are made from A2 tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane. With these tongue cutters, you can now use our small plough plane for tongue-and-groove work. The blades are used in conjunction with our wide-blade conversion kit (see above), creating an interchangeable blade system that enables you...
from £23.20 inc VAT

Veritas Standard Blades for Combination & Small Plough PlanesVeritas Standard Blades for Combination & Small Plough Planes
Veritas Standard Blades for Combination & Small Plough Planes
All blades are made from A2 tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane. The standard blades are stocked for the right hand versions in 1/8", 3/16", 1/4", 5/16", and 3/8" or 4mm, 5mm, 6mm, 7mm, 8mm and 10mm widths.
from £18.40 inc VAT
Veritas Wide Blades for Combination & Small Plough Planes
Veritas Wide Blades for Combination & Small Plough Planes
All blades are made from A2 tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane. The wide blades are available in 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" or 12mm, 16mm and 18mm widths. A wide-blade conversion kit (see above) is required for use of all wide blades with the Veritas...
from £19.90 inc VAT

Veritas Combination Plane Rabbet Blade - 1 1/16'
Veritas Combination Plane Rabbet Blade - 1 1/16'
Will only work with the Veritas combination plane. 1-1/16" wide PM-V11 rabbeting blade lets you cut rabbets up to 1". 35° bevel angle
£19.95 inc VAT
Veritas Beading Blades for Combination & Small Plough PlanesVeritas Beading Blades for Combination & Small Plough Planes
Veritas Beading Blades for Combination & Small Plough Planes
All blades are made from PM-V11® tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane. These blades let you use the small plow plane to create decorative beading on workpieces. The blades are available in 1/8", 3/16" and 1/4" bead diameters. A 1/16" groove is cut on either side of the bead.
from £22.80 inc VAT
Page: 1 | 2 |