Long Rod for Veritas Skew Block Plane
Long Rod for Veritas Skew Block Plane
A long rod for the Veritas Skew Block Plane. Prices include VAT
£6.90 inc VAT
Long Rods for Veritas Skew Rabbet
Long Rods for Veritas Skew Rabbet
Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1½". Prices include VAT
£12.50 inc VAT

Veritas Chamfer Guide for Low-Angle Block Plane
Veritas Chamfer Guide for Low-Angle Block Plane
You can convert the Veritas Low-Angle Block Plane (05P22.01) and Standard Block Plane (05P22.30) into chamfer planes in seconds with this cunning guide. Easy to install - you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again. It is ready to go. Adjustable for...
£27.70 inc VAT
Veritas Hand JointerVeritas Hand Jointer
Veritas Hand Jointer
The Veritas Hand Jointer allows you to accurately joint small parts by hand. Box-making and modelmaking often require small parts that are too dangerous to run through a power jointer and difficult to joint with a hand plane; balancing a plane on pieces much smaller than its sole can be awkward. This hand jointing accessory for Veritas medium and large shoulder planes lets you bring the work...
£41.90 inc VAT

Slow Adjuster for Veritas Bevel-Up Planes - Type A
Slow Adjuster for Veritas Bevel-Up Planes - Type A
The fine thread on this Norris-style adjuster slows blade advancement, making it easier to set blade projection precisely. An easy retrofit, it simply replaces the regular adjuster supplied with our bevel-up planes. Two versions are available. This type fits the bevel-up smoother, bevel-up jointer, low-angle jack, low-angle smooth and low-angle block planes. Made in Canada.
£16.80 inc VAT
Veritas Ball Tail & Knob for Low Angle Block Plane
Veritas Ball Tail & Knob for Low Angle Block Plane
The bevel-up configuration of the Veritas low-angle block plane lets you vary the blade angle to suit the task, from low-angle blades for use on end grain to high-angle blades on figured wood. However, steeper cutting angles require more force to push the plane—a challenge for those with small hands or less strength. We offer inexpensive hardwood grips to adapt our low-angle block plane into...
£45.00 inc VAT

Handles for Veritas Low-Angle Block PlaneHandles for Veritas Low-Angle Block Plane
from £17.00 inc VAT
Veritas Bevel-Up Jointer Fence
Veritas Bevel-Up Jointer Fence
The Veritas low-angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 11" long anodized aluminium fence can be attached to either side of the plane with the brass thumbscrews provided; a set screw can be adjusted to square the fence to the sole. As supplied, the 2" tall guiding face can be used to plane edges perfectly...
£42.60 inc VAT

Veritas Jointer Fence
Veritas Jointer Fence
Planing a square edge on a board requires a jointer fence, whether you are using an electric jointer or a hand plane. The Veritas® jointer fence allows you to shoot accurate and consistent square or bevelled edges with most* iron or steel bench planes. The integral rare-earth magnets make it quick and easy to attach or remove the 11" long anodized aluminium fence from either side of all sizes...
£47.90 inc VAT
Veritas Variable Angle Fence for Bench PlanesVeritas Variable Angle Fence for Bench Planes
Veritas Variable Angle Fence for Bench Planes
This plane fence doesn't limit you to right angles - it allows accurate and consistent planing of any angle from 45° to 135°. Angles are set using a square or angle gauge, or directly on an angle you wish to match. The spring-loaded lever, which locks the fence, can be rotated out of the way if necessary. Through-holes in the 11" long aluminium fence allow the attachment of a wooden...
£62.50 inc VAT

Veritas Plane ScrewdriverVeritas Plane Screwdriver
Back In Stock
Veritas Plane Screwdriver
A regular screwdriver just doesn't work well on cap iron screws. A narrow blade can mar the cap-screw slot, and there's always the risk that the screwdriver tip will slip out of the slot altogether. Veritas have designed this screwdriver to make it both safe and easy to remove, replace or adjust cap irons. It has a turned brass collar surrounding the tip to capture the head of a cap iron screw...
£29.50 inc VAT