Sort By
Per Page
View
Grid
List
Veritas Dovetail Saw
When we first saw this saw (!) we were a bit dubious but it has quickly grown on us. It is very comfortable. it is very affordable, it cuts well and can be re-sharpened. Not for the purists maybe but beauty is in the eye of the beholder. This is what those clever chaps from Veritas say about this saw....
The Veritas dovetail saw is an innovative blend of tradition and technology. It incorporates...
Veritas Fine Cut Dovetail Saw (20tpi)
The Veritas Fine Cut Dovetail Saw (20tpi) is best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury.
The Veritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art...
Veritas Small Crosscut Saw
Used for cutting across or perpendicular to the grain, the 16 tpi crosscut saw blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers; it tracks better and leaves a smoother finish than a rip-cut blade. The teeth are filed with 15° rake and bevel angles and have 0.003" of set per side.
Veritas Rip Cut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm.
The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece...
Veritas Crosscut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed crosscut at 14tpi. The teeth have a rake angle of 15°, an included angle of 60° with alternate 15° bevels to efficienlty sever wood fibres rather than tear. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid...
Veritas Tenon Saws
The unique designs of the Veritas carcass saws and dovetail saws have proved to be extremely popular and Veritas have now introduced two superb tenon saws to complement their range. They combine the best characteristics of this fine classic joinery saw with those of state-of-the-art materials and construction methods.
The tooth pattern on the thin high-carbon steel blade provides a good balance...
Veritas Magnetic Guide & Saw
Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
The Veritas Magnetic Dovetail 1:8 Guide, clamps in position and holds the saw...
Veritas Flush Cutting Saw
Traditionally used for the rapid trimming of plugs and dowels flush with a surface, the Veritas flush cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only
The 22 tpi Japanese tooth-pattern blade cuts aggressively (on the pull stroke), but does not mark the surface that it is...
Veritas Gents Saw - Cross Cut
Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.
The teeth on the 22tpi crosscut saw have a rake angle of 15°, an included angle of 60° and alternating 15° bevel angles so that they sever rather than tear wood fibres.
Depth of cut is 41mm....
Veritas Gents Saw - Rip Cut
Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.
The 20tpi ripsaw has teeth with a 14" rake angle and a 60° included angle.
Depth of cut is 41mm. For strength and rigidity, the glass and stainless steel-filled polymer spine is moulded over...
Veritas Saw File Holder
Not only does this Veritas Saw File Holder provide a secondary grip for your saw file, it also helps you control the angle of the file as you sharpen, using the eye's natural ability to judge parallel and level.
It has a rotating collar for setting a positive or negative rake angle up to 30°, and a 3" wide protractor to set the fleam (or bevel) angle up to 45° left or right. All you need to...
Veritas Magnetic Saw Guides
This anodised aluminium Veritas Magnetic Saw Guide helps keep your saw on the right track and perpendicular to a workpiece. It provides a registration surface about 32mm tall. It is particularly useful when crosscutting tenon shoulders or the edges of a dado, which is where you want your saw to cut straight and true. You can hold the guide onto your workpiece with a hand or secure it with clamps.
The...
Veritas Saw Guide Clamps
These Veritas Saw Guide Clamps are 50mm capacity clamps are anodised aluminium with solid brass screws and pads. They fit into the T-slot on the underside of the saw guide leaving the upper surface clear.
These clamps ensure the guide is secure and firmly held in place resulting in a higher degree of accuracy. Note they can also be used with the magnetic saw guide.
Both Veritas Dovetail Saw and Magnetic Guide
Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
The Veritas Magnetic Dovetail 1:8 Guide, clamps in position and holds the saw...