Sort By
Per Page
View
Grid
List
Robert Sorby Thread and Sizing Gauge
The Robert Sorby thread and sizing gauge takes the guesswork out of dimensioning.
Sterling Tool Works Plane Hammer XL
The Sterling Tool Works Plane Hammer XL is a substantially larger and heavier than their Original Plane Hammer. The Plane Hammer XL weighs in at 1lb vs the original at 7oz.
The Sterling Tool Works Plane Adjustment Hammer is designed to be used to adjust plane blades and wooden Plane wedges for wooden hand planes.
The Hammer is not intended to be used to drive nails or for intense striking of...
Veritas Flushing Chisel Roll
Made of black cotton canvas, this chisel roll holds four Veritas flushing chisel blades and one handle.
Gyokucho CAST Woodworking Folding Saw - Coarse Teeth - 200mm (interchangeable) blade
Works in multiple materials including greenwood, softwoods, OSB, MDF, ply, laminates.
Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times.
Blade about 8¾" long.
Set includes 1/4", 1/2", 3/4", 1" and 1 1/4" chisels.
Robert Sorby Long & Strong Spindle Gouges
Robert Sorby long and strong spindle gouges are the same as standard but with a longer blade allowing you additional reach into the workpiece.
Robert Sorby Round/Side Cut Scraper
The Robert Sorby round/side cut scraper is designed for blending the parallel side wall and the curved bottom of vessels together. It is excellent for undercutting the rims of small bowls.
3/4" Round Side Cut Scraper - 16" with handle
Henry Taylor Long Thin Bevel Edge Paring Chisels Set of 5
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge.
Blade about 8¾" long.
Henry Taylor Woodcarving Punch - Chain Link 1
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Robert Sorby External Bowl Crossbar 9''
This modular tool rest system from Robert Sorby enables the turner to build up a collection of tool rests without going to great expense.
Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem.
Cross bars are specially hardened to avoid those troublesome nicks and...
Sterling Dovetail Rule DTR-2
The Sterling DTR-2 Dovetailing Rule is made to fit Starrett 4'' double and combination squares that have 1/16'' (1.6mm) thick rulers.
The original Sterling DTR-1 is too thick for these Starrett castings. The Sterling DTR-2 is incredibly handy for checking the squareness of your dovetails to ensure excellent fit and “gap less” joints after assembly. The reduced size of...
Woodpeckers Mini Engle Angle 3''
Woodpeckers Engle Angle 3'' (75mm). 2023.
All the same tricks of the larger 6'' tool but in a smaller package so it can get into tighter spots.
This tool is inspired by the vintage #30 Stanley Angle Divider from 1903. By fitting the connected legs into an existing corner, the tool bisects the angle automatically. This is particularly important when mitering trim for existing structures....
Crown Tools Round Nose Scraper
Round Nose Scrapers can be more useful if the left shoulder is ground sharp (this is assuming the tool is being used for inboard turning).
Available in two sizes 1/2'' (13mm) and 3/4'' (19mm).
M2-HSS (High Speed Steel)
Stained beech handle.
Walleted.
Auriou Riffler Rasp Set of 6 - 150mm
All six double ended rifflers giving you 12 precision shaping heads. 150mm (6") Grain 14.
Set includes:
Knife / Spoon
Rhombus / Brush
V Shape / Rectangle
Thumb / Laurel
Rat Tail / Oval
Half Round / Triangular
Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).
Gyokucho Blades for Cast Folding Saws - Medium Teeth
Works with the following Gyokucho Cast 200 saws..............
5123 Cast 200 Medium Teeth
5223 Cast 200 Fine Teeth
5323 Cast 200 Large (Coarse) Teeth
5523 Cast Gardening 200 Medium Teeth
5623 Cast Gardening 200 Large (Coarse) Teeth
5723 Cast Gardening 200 Curve
Henry Taylor Woodcarving Punch - Moon
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Rob Cosman's Card Scraper Pouch
What Rob says
Keep your card scrapers protected with our custom Card Scraper Pouch. Made from the same heavy-duty canvas as our Rob Cosman Aprons, it has two pouches to store and protect two scraper blades.
Our pouches are sized to fit scraper blades up to 6 inches (152 mm) long × 2-1/2 inches (63 mm) wide.
Scrapers are not included.
Robert Sorby Side & End Swivel Tip
The Robert Sorby Side End Swivel Tip is designed to create parallel sides on boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Related Products:...
Cherry Woodturning Blank Bundle
Planed all round English cherry blanks suitable for turning or carving.
This bundle includes the following..
6'' x 6'' x 1 1/2'' (150mm x 150mm x 38mm) Blank x 1
7'' x 7'' x 1 1/2'' (175mm x 175mm x 38mm) Blank x 1
8'' x 8'' x 1/2'' (200mm x 200mm x 38mm) Blank x 1
Kamanomi Japanese Chisel
Used for cleaning the corners of joints.
.png "Last Ones!")
Veritas Jointer Blade Sharpener
A commercial sharpening service or a sophisticated home grinder is necessary for badly nicked blades. The Veritas Jointer Blade Sharpener is designed to restore blades dulled from normal use, even if they contain minor nicks.
It clamps blades up to 8" wide (including hand-plane blades) for sharpening on PSA-backed abrasives. Just stick the abrasive to a flat surface (plate glass works well),...
Breeze - Greetings Card
Breeze is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Morinomi Japanese Chisel
Used for cleaning the bottom of mortices.
Robert Sorby 1/4'' & 1/2'' Cove Cutting Tip
The Robert Sorby Cove Cutting Tip is one of five additional cutters available for the popular Robert Sorbyn Multi-tip Hollowing Tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
This cutter is designed for use with the following tools:
Multi-tip...
Bucket & Spade - Greetings Card
Bucket & Spade is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Sharpening - A Woodworker's Guide
by Randall A. Maxey
Sharpening - A Woodworker's Guide is aimed at both those new to woodworking as well as the experienced woodworker, is broken down into three main sections: sharpening by hand, machine sharpening and putting the theory into practice. Traditional sharpening techniques and tools are covered as well as those using the latest innovations for both hand and machine sharpening.
Areas...
Arbortech Turbo Shaft
The TURBOShaft is a power carving attachment for use fitted to a 100mm (4") or 115mm (4½") angle grinder.
Designed to complement the Arbortech TURBO range or as a stand-alone tool. The TURBOShaft provides the means to carry out detailed freehand carving. It combines efficiency with exceptional control. The TURBOShaft has replaceable carbide teeth offering excellent performance and durability even...
Crown Tools Rolled Edge Skew Chisel
A skew chisel is a tool which repays practise with excellent results. The best, but sometimes the most daunting tool for planing spinle work and with practise, cutting clean beads and fine details.
The first skews were made from rectangular bar. Professionals then groudn a rounded edge to make tool rolling easier when cutting beads. Manufacturers then made a rounded (rolled) edge version, then...
Rob Cosman's Marking Gauge Cutters with Rods
What Rob says
Its very convenient to switch out marking gauge cutter sizes by just removing the rod with cutter attached and replacing it with a different size cutter attached to a rod. Therefore, we offer our replacement cutters with rods. These rods are designed to work with the Rob Cosman marking gauge. They should fit any marking gauge that accepts a 5/16 inch (7.94mm) diameter rod, but we...
Crown Tools Dovetail Cutting Tool
In 2001 Stiles and Bates ground some of their 1/2'' scrapers to this profile for a course they were running.
Crown Tools followed suit so you lovely people can also benefit from S&B's innovation.
So this is not a new idea but from what Dave Bates has shared with us, this tool is more useful than other dovetail tools as it will cut both internal and external dovetails on bowls...
Henry Taylor Woodcarving Punch - Anchor
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Earth, Sea, Sky - Greetings Card
Earth, Sea, Sky is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Gyokucho 375 Dozuki 240mm Rip + Spare Blade
Gyokucho 375 Dozuki 240mm Rip TPE (rubber) handle with a spare blade.
Spare Blade for Lie-Nielsen No. 042 Medium Shoulder Plane
Replacement blade for Lie-Nielsen No. 042 Medium Shoulder Plane.
Comes with a 25° flat ground bevel.
* 3/4" wide x .140" thick
* A2 cryogenically treated Tool Steel
Gyokucho 400 Kataba Proton Power Saw 240mm + Spare Blade
The Gyokucho 400 Kataba Proton Power Saw 240mm with a spare blade.
Gyokucho Fugaku Sentei Gardening Saw - 270mm blade
This model is a long-straight bladed saw with coarse teeth for green woodworking.
Henry Taylor Woodcarving Punch - Tipped Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Tree
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Flexcut Mini-Detail Skew Knife KN31
The Flexcut Mini Detail Skew knife is excellent for fine eye detail and feathers when decoy carving.
Small 9.5mm straight blade, the extended shank helps for a deeper reach of the blade.
Flexcut Detail Skew Knife KN32
This Flexcut knife is excellent for fine eye detail and feathers when decoy carving.
14.3mm (9/16') straight blade.
The extended shank offers a deeper reach for the blade.
Henry Taylor Woodcarving Punch - Heart
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Crown Tools Revolution Complete
Dave Bates (of Stiles & Bates) has described this system as one of the best systems on the market and is part of his own tool rack, which is a recommendation in itself.
Spare Blade for Lie-Nielsen No. 49 Small Tongue & Groove Plane
For use in Lie-Nielsen No. 49 Tongue & Groove Plane. Centres on 1/2" stock, leaving a .166" wide tongue and .230" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Flexcut Quick Connect ABS Handle - 3 pack SK112
3-Pack of Flexcut SK100 ABS Handles: 3" ABS plastic
Quick Connect handle is mid sized for a wide variety of uses.
Made from high impact ABS plastic. The yellow soft urethane gives an exceptional grip.
Fits any unhandled SK tool.
Woodpeckers Precision Woodworking Square 300mm x 200mm
Woodpeckers 1281 Precision Square with Rack-It 300mm x 200mm.
The core of the 1281 is a precisely machined square milled from cast and ground tool plate......the most stable aluminium in the world. The stability of the material and the methods Woodpeckers use to machine the core mean they all hold the tolerance to +/-.0085°. To this highly accurate core they add cheeks to make the base thicker....
Saburrtooth 6mm Taper - 3/4' x 1''
15% discount from price shown.
Tormek DE-200 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
Veritas PM-V11 Vintage Block Plane Blades
Veritas offer top-quality replacement blades for vintage block planes in PM-V11 tool steel. All are lapped on the face side to a flatness tolerance of 0.0005'' (0.0127mm) or better, with an average roughness (Ra) of 5 microinches (0.000127mm) or better.
The blades are 1/8'' (3.17mm) thick with a 25° bevel. The grooves in the blades are for the rear depth-adjust mechanism.
Which...
