Best Selling

Flexcut 30-degree V-Tool (30°) - 5/32'' (4mm) SK413

The Flexcut SK413 30-degree V-Tool is an interchangeable blade used for wood carving. It has a 30° V-shaped edge and is 5/32'' (4mm) wide. This unhandled V-tool is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving. Flexcut V-tools come in various...

£26.90 inc VAT

Saburrtooth 6mm Dove Tail - 3/4'' x 1'' - (Smooth End)

Saburrtooth 6mm Dove Tail - 3/4'' x 1'' - (Smooth End)

15% discount from price shown.

£23.50 inc VAT

view options

Woodpeckers in-DEXABLE Protractor

The Woodpeckers in-DEXABLE Protractor with 450mm metric blade and Rack-It. When your projects get a bit more complicated, and call for angles other than 45° and 90°, the in-DEXABLE Protractor will be a welcome addition to your shop. The smooth turning protractor can be adjusted to any angle between 0° and 90° both right and left. There’s an alignment pin that indexes to the...

£269.95 inc VAT

Veritas Left Handed Blades for Small Plough & Box-Maker's Plough

For the Veritas Left Handed Plough and Left Handed Box-Maker's Plane.

from £20.95 inc VAT

view options

Veritas Quick-Release Sliding Tail Vice

Installing a tail vise is notoriously difficult, usually requiring a section of workbench to be cut away and rebuilt around a complicated vise mechanism. Not so with this one. It can be quickly incorporated into a new bench construction or easily retrofitted to an existing bench without major surgery. The end plates are symmetrical, so you can install the T-handle and quick-release lever in a...

£420.00 inc VAT

Woodpeckers Rule Stop 2

Woodpeckers Rule Stop-2. Simply take any ruler and add this well engineered stop stop to help you repeat yur accurate marking out.

£52.00 inc VAT

Gyokucho 611 Ryoba Fine 240mm + Spare Blade

The Gyokucho 611 Ryoba Fine 240mm with a spare blade.

£42.50 inc VAT

view bundle

Saburrtooth 6mm Rotosaw - 1 1/4'' x 1/4''

Saburrtooth 6mm Rotosaw - 1 1/4'' x 1/4''

15% discount from price shown.

£21.25 inc VAT

view options

Woodpeckers T-Square 600mm

Woodpeckers T-Square Metric 600mm with Rack-It Striking lines parallel with the edge of your stock is made easy with the Woodpeckers Precision T-Square. The beam has a lip that rests on the top surface of your stock, preventing the tool from rolling like many T-Squares. Precision machined scribing guides are spaced every milimetre down the length of the blade. This allows you tro drop the point...

£209.95 inc VAT

Crown Tools Revolution Brass Collet

Crown Tools Revolution Brass Collet available in 2 sizes 3/8'' (10mm) and 1/2'' (13mm)

£29.15 inc VAT

view options

Saburrtooth 6mm Rotosaw - 2'' x 1/4''

15% discount from price shown.

£29.50 inc VAT

view options

Gyokucho 664 Ryoba 300mm + Spare Blade

The Gyokucho 664 Ryoba 300mm TPE (rubber) handle with a spare blade.

£52.50 inc VAT

view bundle

Flexcut Deluxe Palm Set FR405

This Flexcut set is a combination of the FR310 and FR404 palm sets. The regular palm for detail and the wide format for roughing-out makes this a great collection in one convenient box. Palm Tools included: FR308 #2 x 5/16", FR305 #3 x 3/8", FR400 #3 x 5/8", FR401 #5 x 9/16", FR306 #6 x 5/16", FR402 #8 x 3/8", FR309 #11 x 1/8", FR307 70 deg. x 1/4", FR403 70 deg. x 3/8".

£205.00 inc VAT

Flexcut Radius Knife KN36

The Flexcut Radius Knife has a curved bevel and blade for making push cuts, slice cuts and V-shaped cuts. The skewed curvature of the bevel allows for a rolling action and a different approach. The handle shape holds like a pencil or conventional knife.

£41.40 inc VAT

Lie-Nielsen SD-4 - Chipbreaker Screwdriver [Preowned, SOLD]

Chipbreaker screwdriver. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles) Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blades, numbered brass ferrule. The...

£42.00 inc VAT

Woodpeckers Woodworking Rule Protractor Head - Metric

Woodpeckers Woodworking Rule Protractor Head - Metric

Woodpeckers Woodworking Rule Protractor Head - Metric. Includes wall Rack-It wall mount. Woodpeckers Woodworking Rules have earned a reputation for accuracy, convenience and ease-of-use. Now you can add ''versatility'' to that list of features. The newest addition to the Woodpeckers product line converts any Woodpeckers Woodworking Rule (except the 150mm) into an adjustable T-Square...

£176.40 inc VAT

Henry Taylor Woodcarving Punch - Snowflake

Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.

£9.60 inc VAT

Lie-Nielsen - Pair of 1/4'' Skew Chisels [Preowned, Unused, SOLD]

Lie-Nielsen - Pair of 1/4'' Skew Chisels [Preowned, Unused, SOLD]

A pair of 1/4'' skew chisels from Lie Nielsen Toolworks. Pre-owned. but unused. No box.

£250.00 inc VAT

Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]

Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]

A pair of 3/8'' skew chisels from Lie Nielsen Toolworks. Pre-owned. but unused. No box.

£250.00 inc VAT

David Barron - Attractive Brass Headed Hammer [Preowned, SOLD]

David Barron - Attractive Brass Headed Hammer [Preowned, SOLD]

205mm overall with oblong square faced head 60mm x 15mm x 15mm This has been used but is in G++ condition. The handle is gorgeous and made from rippled ash. It has BARRON stamped very clearly on the bulbous end.

£36.00 inc VAT

Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]

Pre-owned in excellent, unused condition This description is from our site where this plane (without plane sack is available for £245) ''This is the smallest of the Lie-Nielsen ''Preston style'' shoulder planes, 5/8'' wide, 5 3/4'' long. The blade is 0.140'' thick, and the tool weighs 1.35 lbs. With an adjustable mouth like its larger siblings,...

£195.00 inc VAT

Tite Mark Long Marking Gauge [Preowned, SOLD]

Tite Mark Long Marking Gauge [Preowned, SOLD]

Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...

£100.00 inc VAT

Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Leather Roll [Preowned, As New, SO

Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Leather Roll [Preowned, As New, SO

An unused set of 5 chisels in the branded Lie-Nielsen leather roll. 3/16'', 1/4'', 5/16'', 3/8'' & 1/2'' Pre-owned but not used.

£595.00 inc VAT

1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]

1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]

Very crisp set of 26 letters plus ampersand (&) plus numbers 0-9 These are unused and are in their original cases.

£36.00 inc VAT

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

Made by Wm. Marples, Sheffield This has a 9'' beech handle with a tapered auger that is stamped 1 1/4'' Wm Marples., Sheffield. It will clean up to G++ with little effort. No rust at all, the handle just needs a light clean with some wax and wire wool.

£24.00 inc VAT

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

This 3 volume set of Knight's American Mechanical Dictionaries and the single volume of Knight's New Mechanical Dictionary (Supplement) was reprinted jointly by The Mid-West Tool Collectors Association and The Early American Industries Association October 1979. It is written elsewhere that "This work has been selected by scholars as being culturally important, and is part of the knowledge...

£250.00 (VAT exempt)

Plough Plane Project [Preowned, SOLD]

So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...

£75.00 inc VAT

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Pre-owned but hardly used. This set of 7 includes the following sizes: 1/8'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'' & 5/8'' (note the correction to earlier description that listed 2 x 3/8" - our apologies for that but it was Fraser's fault as usual) The 5/16'' appears to have been sharpened once but the others are unused. The...

£665.00 inc VAT

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Here is a rare treat. The left hand version has been discontinued and the right handed plane in bronze has not been seen for a few years yet. The Lie-Nielsen No 140 Skew Block Plane is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A...

£1,200.00 inc VAT

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Pre-owned but hardly used at all. This Lie-Nielsen small chisel plane comes with a branded LN sack to keep it protected. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You...

£175.00 inc VAT

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Pre-owned but unused. This is what we say about it on our main site where this exact tool is available for £233 inc VAT "The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own. Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking...

£155.00 inc VAT

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Pre-owned but never used. The description in our Lie-Nielsen plane section says this... "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs. It is called a...

£295.00 inc VAT

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Pre-owned T-300 metric square made in the USA. Unused, as new. Edge markings to 320mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...

£84.00 inc VAT

Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]

Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]

Pre Loved

£325.00 inc VAT

Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]

Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]

Pre Loved

£335.00 inc VAT

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Pre Loved

£25.00 inc VAT

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

£36.00 inc VAT

Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

£45.00 inc VAT

Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]

Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]

Pre Loved

£125.00 (VAT exempt)

Lie Nielsen Toolworks - Fishtail Chisels [Preowned, SOLD]

Lie Nielsen Toolworks - Fishtail Chisels [Preowned, SOLD]

Sold

£300.00 inc VAT

Lie Nielsen Toolworks - Corner Chisels [Preowned, Unused, SOLD]

Sold

£350.00 inc VAT

Woodpeckers 300mm Centre/Standard Rule with end stop [Preowned, Unused, SOLD]

Sold

£36.00 inc VAT

Drawknife - Mike Abbott designed 8'' blade [Preowned, SOLD]

Sold

£48.00 inc VAT

JessEm Tool Company - Wood Sabre Marking Gauge (08803) [Preowned, Unused, SOLD]

Sold

£75.00 inc VAT

Richard Kell Wonder Bundle [Preowned, SOLD]

Sold

£100.00 inc VAT

Woodpeckers - 6'' Carpenters Combination Square [Preowned, Unused, SOLD]

Pre-owned, but the condition is ''as new''. The Woodpeckers 6'' Carpenters Square is a perfectly machined combination 90-degree and 45-degree with handles for a physical reference to the edge of the workpiece. The blade is machined from cast and ground aluminium tool plate. This expensive material is utilised for its mechanical stability and tendency to maintain close...

£50.00 inc VAT