Best Selling

Robert Sorby RSJ5 4¼" Jaws these jaws enable a much bigger recess or spigot to be held and are hence designed for bowls and platters over 16". The photo shows the RSJ5 Jaws fitted to a Patriot Chuck (not included).

£90.00 inc VAT

Edge Float - Pull

Dan Schwank of Red Rose Reproductions contacted Thomas Lie-Nielsen about making their range of discontinued floats. Lie-Nielsen had no plans to re-introduce them so they were supportive in helping Dan getting these back to market. They certainly match the build quality of the original floats by Lie-Nielsen. The Red Rose Reproductions floats come in a variety of sizes for specific uses. Primarily...

£96.00 inc VAT

Gyokucho Blades for Cast Folding Saws - Fine Teeth

Works with the following Gyokucho Cast 200 saws.............. 5123 Cast 200 Medium Teeth 5223 Cast 200 Fine Teeth 5323 Cast 200 Large (Coarse) Teeth 5523 Cast Gardening 200 Medium Teeth 5623 Cast Gardening 200 Large (Coarse) Teeth 5723 Cast Gardening 200 Curve

£16.50 inc VAT

Manpa 2'' Triangle Cutter

Manpa Power 2'' Carving Cutter - Triangle Features : • Smooth power carving • Perfect for detail & sculpting work • Great for creating textures Includes star wrench Please note this only fits the Manpa 2'' Belt Cutter

£81.00 inc VAT

Robert Sorby Heavy Duty - Bowl Finishing Outboard Scraper

The Robert Sorby Heavy Duty Bowl Finishing Outboard Scraper is ideal for finishing when working in the outboard mode of the lathe. 1 1/2" (38mm) wide by 21" (525mm) overall length.

£109.95 inc VAT

Veritas Concave Spokeshave [Rare, Pre-owned, SOLD]

Veritas Concave Spokeshave [Rare, Pre-owned, SOLD]

This is a curious rarity. Originally made by Veritas as one of 3 shaves designed by Brian Boggs the legendary chairmaker (and top geezer) before they were subsequently made by Lie-Nielsen Toolworks. So this dates back about 20-25 years. It is slightly smaller than the current LN model being 9" overall with rosewood handles. 1 1/4" blade.

£225.00 inc VAT

Gyokucho 304 Tatebiki Noko + Spare Blade

The Gyokucho 303 Tatebiki Noko 240mm TPE (rubber) handle with a spare blade.

£38.95 inc VAT

view bundle

Lie-Nielsen Metric Dowel Plane [Pre-owned, SOLD]

Lie-Nielsen Metric Dowel Plane [Pre-owned, SOLD]

This metric dowel plate from Lie-Nielsen Toolworks comes with a leather wallet and is unused - as new. If you want to make exact-sized dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool. It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface ground A2 tool steel. The holes are machined...

£84.00 inc VAT

Robert Sorby Pin Jaws 1' (25mm)

Robert Sorby 1" Pin Jaws have extra length of these jaws makes them suitable for awkward pieces of wood like burrs. Dovetailed on the inside and outside they are ideal for small projects or tall turned items like pepper-mills. The photo shows the Pin Jaws fitted to a Patriot Chuck (not included).

£78.95 inc VAT

English Oak Woodturning Blank Bundle

Kiln Dired Oak from the North of England. A 3 blank bundle comprising of.. 3 ½” x 3 ½” x 2” (90mm x 90m x 50mm) x 1 6” x 6 “ x 1 ½” (150mm x 150mm x 38mm) x 1 7” x 7” x 1 ½” (175mm x 175mm x 38mm) x 1

£15.00 inc VAT

Robert Sorby 3/8' & 5/8' Cove Cutting Tip

The Robert Sorby Cove Cutting Tip is one of a few additional cutters available for the popular Robert Sorbyn Multi-tip Hollowing Tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. This cutter is designed for use with the following tools: Multi-tip...

£22.95 inc VAT

Dovetail Cutter for Gifkins H Series

The TGHD 12 1/4' is the H10 dovetail cutter and mate to the straight cutter. The H10 dovetail cutter and the H10 straight cutter are designed specifically for the H10 Template. Note: All Gifkins Dovetail cutters are designed for use in a table mounted router, and should not be used in a hand held router.

£47.00 inc VAT

Rob Cosman's Marking Gauge Cutters with Rods

What Rob says Its very convenient to switch out marking gauge cutter sizes by just removing the rod with cutter attached and replacing it with a different size cutter attached to a rod. Therefore, we offer our replacement cutters with rods. These rods are designed to work with the Rob Cosman marking gauge. They should fit any marking gauge that accepts a 5/16 inch (7.94mm) diameter rod, but we...

£26.50 inc VAT

view options

Side Float - Pull

Dan Schwank of Red Rose Reproductions contacted Thomas Lie-Nielsen about making their range of discontinued floats. Lie-Nielsen had no plans to re-introduce them so they were supportive in helping Dan getting these back to market. They certainly match the build quality of the original floats by Lie-Nielsen. The Red Rose Reproductions floats come in a variety of sizes for specific uses. Primarily...

£98.00 inc VAT

Woodpeckers Edge Rule 300mm

Woodpeckers Woodworking Edge Rule - Metric 300mm (Includes Edge Rule Stop) Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to jeep the rule parallel to your work. The...

£31.44 inc VAT

Small Cheek Float - Pull

Dan Schwank of Red Rose Reproductions contacted Thomas Lie-Nielsen about making their range of discontinued floats. Lie-Nielsen had no plans to re-introduce them so they were supportive in helping Dan getting these back to market. They certainly match the build quality of the original floats by Lie-Nielsen. The Red Rose Reproductions floats come in a variety of sizes for specific uses. Primarily...

£93.00 inc VAT

2 Spokeshaves [Vintage, SOLD]

8” beech bodied spokeshave with1 ½” straight blade, in good order. Stamped Parry & Son 359 Old St. with the Sundial logo. An adjustable mouth beech bodied spokeshave with brass adjusting knobs and curved wear strip to the sole which houses the 3” blade. No cracks, Made by J. Frost Norwich, England. 11 1/2” overall. J.Frost, Norwich dates from 1864-1892. Both...

£65.00 inc VAT

Gyokucho 400T Kataba Proton Power Saw 240mm + Spare Blade

The Gyokucho 400T Kataba Proton Power Saw 240mm TPE (rubber) handle with a spare blade.

£36.95 inc VAT

view bundle

Inlay Radius Cutter Extension Rods

£26.95 inc VAT

Silky Pocket Boys - Replacement Blades

These are the replacement blades for the Pocket Boy Large Teeth - 8 teeth per 30mm Super lightweight, durable, attractive, compact design and marvellous cutting capability. Chrome plated, taper ground blade Electrical induction hardened teeth Low effort triple edge, non-set tooth design Blade locks securely in two positions for flush cutting Folding feature protects blade Flip-Lock...

from £21.65 inc VAT

view options

Record 043 Plough Plane [Preowned, Unused, SOLD]

Record 043 Plough Plane [Preowned, Unused, SOLD]

This sweet little Record plough plane No. 043 is 140mm (5 1/2'') overall designed for making small rebates and cutting grooves. The 043 has an adjustable depth stop, 2 arms and a bridged fence which can be used on either side of the plane body (for left or right handed use). Original (tatty box). The plane is unused. 3mm, 4.5mm & 6.4mm cosmetically tarnished blades. Commission...

£75.00 (VAT exempt)

Veritas Quick-Release Sliding Tail Vice

Installing a tail vise is notoriously difficult, usually requiring a section of workbench to be cut away and rebuilt around a complicated vise mechanism. Not so with this one. It can be quickly incorporated into a new bench construction or easily retrofitted to an existing bench without major surgery. The end plates are symmetrical, so you can install the T-handle and quick-release lever in a...

£420.00 inc VAT

Saburrtooth 6mm Rotosaw - 1 1/4'' x 1/4''

Saburrtooth 6mm Rotosaw - 1 1/4'' x 1/4''

15% discount from price shown.

£21.25 inc VAT

view options

TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]

TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]

Blue steel cutting edge made of Tasai special blue steel, a custom made steel for master blacksmith Tasai which is laminated onto the special multi-layer core ''Mokume pattern'' The handle is made of sandalwood (and still has its protective film covering it which we have decided not to remove to allow you the privilege. However the photo will show a glaze rather than the true colour of the handle). We...

£235.00 (VAT exempt)

Lie-Nielsen Low Angle Jack Plane - LN 62 (with additional toothing blade) [Preowned, Unused, SOLD]

Lie-Nielsen Low Angle Jack Plane - LN 62 (with additional toothing blade) [Preowned, Unused, SOLD]

This is a commission sale and in his notes our customer has advised that this plane has had very little use at all. Well, as the plane is still in its undisturbed paper wrapping within its blue sealed bag and original box, we respectfully disagree. This plane has yet to see the light of day and it is unused! Also comes with an unused toothing plane blade (Toothed blades have small chisel-like teeth...

£350.00 (VAT exempt)

Crown Tools Revolution Brass Collet

Crown Tools Revolution Brass Collet available in 2 sizes 3/8'' (10mm) and 1/2'' (13mm)

£29.15 inc VAT

view options

Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]

Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]

These have been very little used and show no sign of wear. The original grinding marks are still on show. The set graduates from 1/8" through to 2" as follows. 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2" & 2" Most of them have their edge guards. Brass ferrules (one has split) Boxwood handles. Commission sale.

£245.00 (VAT exempt)

Gyokucho Small Gardening Saw + Spare Blade

The Gyokucho Small Gardening Saw with a spare blade.

£35.50 inc VAT

view bundle

Old Grannies Tooth Router [Pre-owned, SOLD]

Old Grannies Tooth Router [Pre-owned, SOLD]

This tool is larger than your usual granny. She measures 240mm x 90mm x 65mm She has 10mm, 12mm, 14mm, 16mm & 18mm wide straight blades which are currently crudely sharpened and would benefit from being refined (not a difficult task). Not elegant or refined like most grannies but adorable nevertheless!

£30.00 inc VAT

Brusso Stainless Steel Hinges – CB302S [Clearance]

Brusso Stainless Steel Hinges – CB302S [Clearance]

Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...

£42.00 inc VAT

Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]

Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]

This was a commission plane for an English customer. The plane is a skewed rebate plane with a 1 3/16'' blade set in a 1 7/8'' wide body with a full width fence that is ¾'' deep. The plane is 9 ¼'' long. It has a nicked iron as shown in the photograph and a full length brass wear strip. Philly Planes stamped on the front of the plane. We can...

£250.00 inc VAT

Lie-Nielsen 5/8'' chisel with paring handle [Pre-owned, SOLD]

Lie-Nielsen 5/8'' chisel with paring handle [Pre-owned, SOLD]

Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£75.00 inc VAT

Lie-Nielsen No. 4 1/2 Smoothing Plane [Pre-owned, SOLD]

Lie-Nielsen No. 4 1/2 Smoothing Plane [Pre-owned, SOLD]

Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£375.00 inc VAT

Veritas Combination Plane with storage box & 7 cutters [Pre-owned, SOLD]

Veritas Combination Plane with storage box & 7 cutters [Pre-owned, SOLD]

Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£495.00 inc VAT

Veritas Medium Shoulder Plane (with PM V11 blade) [Pre-owned, SOLD]

Veritas Medium Shoulder Plane (with PM V11 blade) [Pre-owned, SOLD]

Please note: you have 15 minutes to complete checkout with this Friday Finds item. Thank you.

£185.00 inc VAT

Richard Kell Large Honing Guide (up to 2 5/8'') [Pre-owned, SOLD]

Richard Kell Large Honing Guide (up to 2 5/8'') [Pre-owned, SOLD]

Please note: you have 15 minutes to complete checkout with this Friday Finds item. Thank you.

£36.00 inc VAT

Veritas Honing Guides [Pre-owned, SOLD]

All these items were purchased separately but would constitute a Deluxe Honing Guide Kit. Used, all components are in good order. 5 items - The standard & narrow blade clamping heads, the angle registration jig, straight and camber roller bases. These would set you back about £120 new.

£80.00 inc VAT

Lie-Nielsen - Low Angle Block Plane L-N 60 ½ - O1 blade [Pre-owned]

Lie-Nielsen - Low Angle Block Plane L-N 60 ½ - O1 blade [Pre-owned]

Dating from 2012 but very well looked after with 80-85% of the O1 blade remaining. Boxed. Wear marks consistent with use but in perfect working order.

£145.00 inc VAT

Ashley Iles Bevel Edge Butt Chisels – Set of 6 [Pre-owned, SOLD]

Ashley Iles Bevel Edge Butt Chisels – Set of 6 [Pre-owned, SOLD]

Complete with a hardwood stand to house the chisels this pre-owned set of 6 Ashley Iles chisels are all in G++ condition. (F = Fine which is basically new or unused, G++ is Good Condition ++, used but very well look after. G+ is used or some wear & tear/minor work needed. When buying tools for use you shouldn’t go below these levels (G, G- etc as these are generally for collectors rather...

£135.00 inc VAT

1” Moving Fillester Plane by John Moseley & Son, London [Vintage, SOLD]

1” Moving Fillester Plane by John Moseley & Son, London [Vintage, SOLD]

This is a lovely fillester plane by John Moseley & Son, 54-55 Broad Street, Bloomsbury, London Beech with boxwood wear strip & nicker wedge. Good clear, crisp stamp. 9 ½” x 2” overall The original owner obviously coveted this plane as the initials “FGC” are stamped very boldly into the side of the plane. John Moseley was making planes in Broad...

£75.00 inc VAT

HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned, SOLD]

HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned, SOLD]

Clifton haven’t made the high-speed steel deburring tool since being taken over by Thomas Flinn so this handsome tool is a little bit of a rarity. The burnishing tool is still offered today. Rosewood handles with brass ferules/collars (to protect your knuckles). Pre-owned but little used.

£60.00 inc VAT

Veritas Small Bevel -Up Smooth Plane with PM-V11 blade [Preowned, SOLD]

Veritas Small Bevel -Up Smooth Plane with PM-V11 blade [Preowned, SOLD]

Pre-owned in G++ condition This is the description from our main Veritas section This Veritas low angle smoother is 225mm long, 59mm wide and weighs only 1.25kg. It is easier to handle than a full size smoother. Think of it lying somewhere between a large block plane and a full size smoother, then you’ll see just how useful this plane can be. Like a full-size version, it is useful for...

£175.00 inc VAT

No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]

No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]

Pre-owned and used sparingly. This is the iron bodied version with the side handle. Later models had the option of a "hot dog" attachment which would still work with this model if you thought you needed it although this bad boy maybe heading to a collector. This discontinued beauty has marks of use. The sole is 90-95% free of any marks as are the side faces. This is not pristine,...

£625.00 inc VAT

2 Good Oval Handled Mortise Chisels 3/16'' & 3/8'' [Vintage, SOLD]

These would be termed vintage. In fact, these 2 were made centuries ago! They are great tools with original handles (in good but slightly grubby condition which can easily be rectified with a bit of wax and elbow grease). The chisels are not heavily used and will give a few decades of service. These legendary Sheffiled toolmaking companies made these mortise chisels between the times stated. 3/16''...

£115.00 inc VAT

Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance, SOLD]

Upsweep & Cutting Knives KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 2 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge each measuring approximately...

£44.00 inc VAT

Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance, SOLD]

New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...

£20.00 inc VAT

Tite-Mark Standard [Preowned, SOLD]

Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...

£85.00 inc VAT

Incra Stainless Steel Metric Rule Set [Preowned, SOLD]

Incra Stainless Steel Metric Rule Set [Preowned, SOLD]

300mm, 150mm & 75mm long. These super slim Incra rules are extremely precise measuring aids as they have holes for precise marking allowing accuracy to 0.25mm In almost new condition. You’ll need a 0.5mm diameter lead in your pencil to fit the holes.

£30.00 inc VAT

Recently viewed

Classic Hand Tools

Customer Service

Best Selling

Category

Brand

Collection

Price

Additional Filters

Sort By

Per Page

View

Recently viewed