Sort By
Per Page
View
Grid
List
Ulmia Alu-Line 350mm Square
A new range of layout tools from Ulmia. Ulmia are probably best known for their workbenches and wooden hand planes, but as soon as we picked these squares up we knew we needed to add them to our ever increasing inventory! This new series is called Alu-Line, and combines aluminium and walnut to give these squares and bevels a feel of quality which is hard to find at this price point.
Precision...
Woodpeckers Bevel Gauge Block
The Bevel Block: A Handy Angle Reference.
The Bevel Block provides a physical references for the most common mitre angles and popular dovetail angles. By referencing its different faces, you can set the primary angle, its complement (90° minus that angle), or its supplement (180° minus it). Can also be used with other brands of sliding bevels.
As with all tools from Woodpeckers, each...
Inlay Radius Cutter
The Latta Inlay Radius Cutter by Red Rose Reproductions
Used to cut grooves to receive stringing on a radius. It can cut a radius from 11/16'' (17mm) to 4'' (100mm). With the optional extension rods, it can cut any size radius required. Each pair increases the maximum radius that can be cut by 3'' (76mm). Comes with two pivot points of different heights.
The radius cutter...
![Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]](/images/products/small/3923_10084.jpg "Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]")
![Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]](/images/products/small/3923_10083.jpg "Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]")
Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
Currently out of stock on our main site.
This plane is in its original box (dated 2019) and is supplied with a branded Lie-Nielsen plane sock. Our inspection shows cosmetic scratches, scuffs etc consistent with relatively light use over time. The brass will clean up beautifully with a light polish. So we are happy to describe this as in...
Manpa Round Carving Bits - 1/8'' Shank
The Manpa Mini Carving Bits - Round (1/8'' Shank) are designed for smooth carving on wood with a 5mm cutter which is replaceable.
They are great for detail work and sculpting and have been created specifically for textures.
Also included is a T6 Torx Wrench.
Robert Sorby RSJ1 Jaws - 1' (25mm)
1" Jaws. With a fine internal and external dovetail, these 1" jaws are perfect for gripping miniature projects. The jaws expand from 25mm to 50mm and compress from 39mm down to 14mm.
Also compatible with Nova and Supernova chucks.
The photo shows the RSJ1 Jaws fitted to a Patriot Chuck (not included).
Flexcut #11 Palm Gouges
1/16'' (2mm) FR602
1/8'' (3mm) FR309
3/16'' (5mm) FR409
1/4'' (7mm) FR408
This is the deepest gouge profile with fixed handled that is also popular with printmakers for their lino or woodblock cutting.
The FR range of Flexcut carving tools amounts to about 40 individual profiles of which FR600, FR601, FR602, FR603, FR800, FR801, FR802 and FR803 profiles...
Gyokucho 295 Compact Jushi 180mm + Spare Blade
The Gyokucho 295 Compact Jushi 180mm with a spare blade.
Kirjes Basic Sanding Kit
This finishing accessory selection from Kirjes is ideal for difficult profiles, finishing small to medium carvings, boxes, bowls, musical instruments, duck decoys, walking sticks, fine furniture, toys, spoons, 3D-intarsia, taxidermy and a myriad of other DIY applications. The dome shaped round sander is also particularly well suited for round, curved, bulging or cup formed shapes where the drum sander...
Manpa Triangular Carving Bits - 1/8'' Shank
The Manpa Mini Carving Bits - Triangle (1/8'' Shank) are designed for smooth carving on wood with a 5mm cutter which is replaceable.
They are great for detail work and sculpting and have been created specifically for textures.
Also included is a T6 Torx Wrench.
Oscar Rush Long Bent Gouge - shallow sweep - 25/35/45mm
Oscar's hand forged gouges measure between 280mm and 300mm (11'' to 12'') overall including the octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These long bent gouges are from a 90mm circle - shallow sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International...
Gyokucho Blades for Cast Folding Saws - Coarse Teeth
Works with the following Gyokucho Cast 200 saws..............
5123 Cast 200 Medium Teeth
5223 Cast 200 Fine Teeth
5323 Cast 200 Large (Coarse) Teeth
5523 Cast Gardening 200 Medium Teeth
5623 Cast Gardening 200 Large (Coarse) Teeth
5723 Cast Gardening 200 Curve
Rob Cosman's Apron 2.0
What Rob says
Every woodworker needs a good Apron. We took our original apron and did a major design overhaul to toughen it up and we get - Apron 2.0!. It’s made of 8oz cotton canvas which we find is the perfect weight for toughness while at the same time allowing you to move around and not overheat. We improved the webbing to 1-1/2 inches (38mm) wide military specification webbing and...
Robert Sorby Heavy Duty - Full Round Scraper
The Robert Sorby Heavy Duty Full Round Scraper is ideal for finishing on bowls and platters especially where a smooth curve is required.
1 1/2" (38mm) wide by 21" (525mm) overall length.
Robert Sorby Steb Drive
The Robert Sorby Steb Drive is a highly effective woodturning accessory designed for use with a lathe. It fits into the jaws of a Patriot chuck and uses serrated teeth combined with a spring-loaded centre pin for a secure grip on wood, preventing slippage during turning. Available in multiple sizes (7/8", 1/2", and 1 1/4"), this tool is perfect for woodturning projects that require precision...
Striking Knife
Imported from Lee Valley in Canada, this marking knife has a 55° included angle on the tip, ideal for a relaxed grip with maximum control.
The blade is perfectly ground and razor sharp. For right- or left-hand use, it marks in either direction.
The hardwood handle is designed for comfort and precise control with flats on the sides to prevent rolling.
Just under 7'' long.
Gifkins Standard Backing Boards
A set of two backer boards is included with each Gifkins Jig. The are sacrificial items and occasionally need to be replaced. While they are very easy for the user to reproduce, we do offer them as an option. Approximate size is 15-3/4" x 3-1/8'' x 1/2".
Gyokucho 303 Tatebiki Noko + Spare Blade
The Gyokucho 303 Tatebiki Noko 240mm with a spare blade.
Rob Cosman's Card Scraper Pouch
What Rob says
Keep your card scrapers protected with our custom Card Scraper Pouch. Made from the same heavy-duty canvas as our Rob Cosman Aprons, it has two pouches to store and protect two scraper blades.
Our pouches are sized to fit scraper blades up to 6 inches (152 mm) long × 2-1/2 inches (63 mm) wide.
Scrapers are not included.
Saburrtooth 1/8'' Burrs Spoon Carving Set
This Saburrtooth spoon carving set includes the following:
18BN14 1/8" Ball Nose 1/4" - Whispers (Extra Fine)
18F38 1/8" Flame 3/8" - Whispers (Extra Fine)
18RS58 1/8" Rotosaw 5/8" - Coarse
18DT38 1/8" Dove Tail 3/8" - Coarse
Auriou Riffler Rasp Set of 6 - 175mm
All six double ended rifflers giving you 12 precision shaping heads. 175mm (7") Grain 13.
Set includes:
Knife / Spoon
Rhombus / Brush
V Shape / Rectangle
Thumb / Laurel
Rat Tail / Oval
Half Round / Triangular
Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).
Gyokucho 306 Razorsaw ZA + Spare Blade
The Gyokucho 306 Razorsaw ZA 240mm with a spare blade.
English Oak & Ash Woodturning Blank Bundle
English Oak & Ash blanks from the North of England.
A 5 blank bundle consisting of..
Oak - 7'' x 7'' x 1 1/2'' (175mm x 175mm x 38mm) x 1
Oak - 3 1/2'' x 3 1/2'' x 2'' ( 90mm x 90mm x 50mm) x 1
Ash - 5'' x 5'' x 1 1/4'' (125mm x 125mm x 32mm) x 1
Ash - 6'' x 6'' x 1 1/4'' (150mm x 150mm...
Dovetail Cutter for Gifkins B Series
The TGBD 16 1/2' is the B10 dovetail cutter and mate to the straight cutter. The B10 dovetail cutter and the B10 straight cutter are designed specifically for the B10 Template.
Note: All Gifkins Dovetail cutters are designed for use in a table mounted router, and should not be used in a hand held router.
Straight Cutter for Gifkins B Series
The TGBS 16 1/2' is the B10 straight cutter and mate to the dovetail cutter. The B10 dovetail cutter and the B10 straight cutter are designed specifically for the B10 Template.
Note: All Gifkins Dovetail cutters are designed for use in a table mounted router, and should not be used in a hand held router.
Silky F180 Folding Saw - Replacement Blade
This is the replacement blade for the Silky F180 folding saw which is a lightweight folding pocket saw aimed mainly at the light pruning and gardening market.
The blade is 180mm long with a large tooth configuration of 7.5 teeth per 30mm. The blade locks in two positions to allow flush cuts.
The handle is constructed of fibreglass polypropylene with a rubber insert to ensure a comfortable and...
Woodpeckers Edge Rule 300mm
Woodpeckers Woodworking Edge Rule - Metric 300mm (Includes Edge Rule Stop)
Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to jeep the rule parallel to your work. The...
.png "Last Ones!")
Saburrtooth 6mm Dove Tail - 3/4'' x 1'' - (Smooth End)
15% discount from price shown.
Flexcut 60-degree Soft-V Interchangeable Tool (60°) - 1/2'' (12mm) SK760
The Flexcut SK760 60-degree Soft-V Tool is an interchangeable blade used for wood carving. It has a 60° Soft-V-shaped edge and is 1/2'' (12mm).
This unhandled V-tool is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Flexcut V-tools come in various...
Oscar Rush Slick
These hand forged timber framing slicks with leather guards are made here in Suffolk by Oscar Rush.
Width of 60mm or 2 3/8'' with offset sockets and long turned ash handles - they are real beauties!
Please note each of these tools are forged, ground and handled by hand which makes each of these beautifully functional edge tools unique.
There will be slight variations between each...
Replacement Blade for Clifton No. 400 Shoulder Plane
A replacement blade for the Clifton 400 Shoulder Rebate Plane.
Adjustment of the cutting iron is done in the traditional manner by tapping the end of the cutting iron and locking the Rosewood wedge in place.
Cutter: 7/16" (11mm) wide
Made in Sheffield, UK
Gyokucho 400T Kataba Proton Power Saw 240mm + Spare Blade
The Gyokucho 400T Kataba Proton Power Saw 240mm TPE (rubber) handle with a spare blade.
Gyokucho Blade for Small Gardening Saw (6611)
Replacement for the Gyokucho #6611 saw
Replacement Blade for Clifton No. 410 Shoulder Plane
Blade for the Clifton 410 Shoulder Rebate Plane.
The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw..
Cutter: 11/16" (18mm) wide
Made in Sheffield, UK
Robert Sorby ProEdge Knife Holder Large
For hunting knives and those with blades over 8".
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Silky Pocket Boys - Replacement Blades
These are the replacement blades for the Pocket Boy Large Teeth - 8 teeth per 30mm
Super lightweight, durable, attractive, compact design and marvellous cutting capability.
Chrome plated, taper ground blade
Electrical induction hardened teeth
Low effort triple edge, non-set tooth design
Blade locks securely in two positions for flush cutting
Folding feature protects blade
Flip-Lock...
Arbortech Mini Turbo Replacement Teeth and Screws
This pair of tungsten carbide teeth is for use on the Arbortech Mini Turbo Blade and the Turbo Shaft.
Includes Screws.
Veritas Quick-Release Sliding Tail Vice
Installing a tail vise is notoriously difficult, usually requiring a section of workbench to be cut away and rebuilt around a complicated vise mechanism. Not so with this one. It can be quickly incorporated into a new bench construction or easily retrofitted to an existing bench without major surgery.
The end plates are symmetrical, so you can install the T-handle and quick-release lever in a...
Silky Super Accel Saw - Replacement Blade
This is the replacement blade for the Super Accel Saw. There is just one screw to unwind in order to change the blade.
The Silky Saws Super Accel 21 is a very popular lightweight folding saw with a versatile 210mm length blade. The saw is designed for general pruning and is happily used by professional arborists and amateur gardeners alike. It is also popular with those enjoying the great outdoors.
This...
Saburrtooth 6mm Rotosaw - 1 1/4'' x 1/4''
15% discount from price shown.
Flexcut Radius Knife KN36
The Flexcut Radius Knife has a curved bevel and blade for making push cuts, slice cuts and V-shaped cuts.
The skewed curvature of the bevel allows for a rolling action and a different approach.
The handle shape holds like a pencil or conventional knife.
Tormek HTK-00 Storage Tray
The Tormek HTK-00 Storage Tray stores all the jigs included with their Hand Tool Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
SVM-45 Knife Jig
SVM-140...
Tormek Knife Profile Jig
The Tormek Knife Profile Jig SVP-80 sharpens all makes and shapes of moulding knifes with 24, 30 or 36 mm distance between the hole-centres.
Since you sharpen the flat back surface of the knife, you can use the jig regardless of the profile. Max width 100 mm. Also for profiled paint removal blades.
Veritas 2 1/8'' PM-V11 Blade for Vintage Spokeshaves
Top-quality replacement blades for Stanley #51/#52 and Record/Stanley #151 spokeshaves.
Produced by Veritas in their PM-V11 (Rc61-63) tool steel, the blades are 2 1/8'' (54mm) wide by 1 7/8" (47mm) high, have a 30° bevel and are lapped on the face to a flatness tolerance of 0.0005" (0.0127mm) or better over the entire surface. The blades are a hefty 3/32'' (2.4mm) thick...
![Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]](/images/products/small/4588_12570.jpg "Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]")
![Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]](/images/products/small/4588_12569.jpg "Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]")
Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]
These bevel gear hand drills are very underrated examples of hand tool ingenuity. Our American friends seem to hold their clever design and functional efficiency in higher regard than user/collectors on this side of the pond (as they do wrenches and other seemingly simple tools).
Fun to use.
Note: there is a spring missing in the jaw mechanism, so clamping is slightly assymetric, but still central....
![Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]](/images/products/small/4591_12574.jpg "Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]")
Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3
and Guernsey & Jersey
![EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]](/images/products/small/4181_11180.jpg "EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]")
![EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]](/images/products/small/4181_11181.jpg "EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]")
EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]
New current stock - a straight carving gouge bundle!
Ok – we overstocked through our enthusiasm to promote this great British brand and then Henry Taylor slimmed down their overall offering of carving tools, so we decided to concentrate our future investment in woodcarving hand tools in Swiss maker Pfeil and USA maker Flexcut. No crying here but we are trying to get these remaining new tools...
Replament Blade for Veritas Pullshave
A replacement PM-V11 blade for the Veritas Pullsahve.