Crown Tools Revolution Replacement Blades for Long Hollower
Crown Tools Revolution Replacement Blades for Long Hollower
Set of 2 Long Hollower blades for the Crown Tools Revolution Hollowing System
£26.30 inc VAT
Lie-Nielsen Toolworks - 2 3/8 inch wide replacement frog [Pre-owned]
Lie-Nielsen Toolworks - 2 3/8 inch wide replacement frog [Pre-owned]
Ribbit ribbit ribbit... What is Kermit's favourite music......answer at end... This Lie-Nielsen replacement frog is at the standard angle of 45 degrees and is for a LN No. 4 1/2, 5 1/2, 6 or 7 plane only. Supplied with a branded Lie-Nielsen plane sock. It has a very minor scratches but appears unused. Selling for about £105 on our main site. (oh yes.....Kermit's favourite...
£75.00 inc VAT

Crown Tools Revolution Shaft 1/2''Crown Tools Revolution Shaft 1/2''
Crown Tools Revolution Shaft 1/2''
Crown Tools Revolution 1/2'' shaft only
£34.30 inc VAT

Henry Taylor Woodcarving Punch - Medallion 2
Henry Taylor Woodcarving Punch - Medallion 2
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
£10.50 inc VAT
Lovely Stanley No.5 [Pre-owned]Lovely Stanley No.5 [Pre-owned]
Lovely Stanley No.5 [Pre-owned]
A very nice Stanley Bailey No.5 jack plane with lovely rosewood handles. This plane has been used bt there is plenty of life left in the blade. It has been extremely well looked after.
£85.00 inc VAT

Crown Tools Revolution Spiralling WheelCrown Tools Revolution Spiralling Wheel
Crown Tools Revolution Spiralling Wheel
Crown Tools Revolution Spiralling Wheel available in 18 and 30 tooth.
from £26.25 inc VAT
Crown Tools Revolution Texturing Tool
Crown Tools Revolution Texturing Tool
The Crown Tools Revolution Texturing Tool fits directly into the 1/2'' (13mm) collet of the Revolution Handle and is supplied with a 18 tooth texturing wheel. The blade has an indexing line scribed down the centre to allow the use of Crown Tools Indexing Tool. Adding the Indexing Tool with the appropriate Spiralling Wheels available offers full spiralling capabilities.
£77.75 inc VAT

Stanley 55 Combination Plane [Vintage]Stanley 55 Combination Plane [Vintage]
Special Offer
Stanley 55 Combination Plane [Vintage]
A very good example of this classic plane. More often than not, these planes are missing things such as the nicker irons, the slitter cutter, cam rest, short rods and the like which can be irritating to say the least. No such woriies here as this Stanley 55 Universal Plane is complete including 4 boxes of standard cutters and an instruction booklet. We see alot of Stanley 45 & 55's...
£295.00 inc VAT
Crown Tools Revolution Texturing Wheel
Crown Tools Revolution Texturing Wheel
18 Tooth texturing wheel, wheels are approx 37mm diameter with 8mm central hole.
£28.75 inc VAT

Stanley No.67 Shave [Vintage]Stanley No.67 Shave [Vintage]
Revised
Stanley No.67 Shave [Vintage]
These are quite difficult to find these days. A nice example of the Stanley 67 spokeshave which has detachable rosewood handles that can be moved to a 90 degree setting by use of pre-drilled holes. Good original Stanley Sweetheart iron remains.
£60.00 inc VAT
Record No.8 Jointer  [Pre-owned]Record No.8 Jointer  [Pre-owned]
Revised
Record No.8 Jointer [Pre-owned]
A well looked after No.8 Record jointer plane. 2 5/8” wide original Record blade (plenty of life left) 24” long and weighing in nearly 5 kgs Good stained beech handles. Clean mouth.
£145.00 inc VAT

Record No.7 Jointer Plane [Pre-owned]Record No.7 Jointer Plane [Pre-owned]
Revised
Record No.7 Jointer Plane [Pre-owned]
Record No.7 jointer plane in excellent condition, original full 2 3/8 inch wide iron Stained beech handles. The plane presents very well and just needs a bit if a final clean. There is staining to the cap iron and blade as you can observe but nowhere the cutting/holding edges. In good order. This weighs in nearly 3.5kgs so work those muscles!
£135.00 inc VAT
Preston Bullnose Plane [Vintage]Preston Bullnose Plane [Vintage]
Revised
Preston Bullnose Plane [Vintage]
An excellent bullnose plane with good iron by Preston. The mouth is square. 1 1/8 inch wide. 5 1/4 inches overall. The sole is 3 3/4 inches long. Body has cosmetic blemishes comensurate with age. This will be a good value addition to your tool box.
£52.00 inc VAT

4 Beech Spokeshaves [Vintage]4 Beech Spokeshaves [Vintage]
Revised
4 Beech Spokeshaves [Vintage]
4 nice beech sopkeshaves with good blades. Cutting edges of 1, 1 3/4, 2 1.4 & 2 3/4 inches. The 1, 1 3/4 and 2 1/4 inch bladed shaves have quite tight mouth openings whereas the largest shave has done more work and the mouth is more open due to wear but it is perfectly usuable. The 1 inch blade spokeshave has a brass wear strip. Quite a cute collection.
£34.00 inc VAT
4 Diamic Henry Taylor Turning Gouges [Pre-owned]4 Diamic Henry Taylor Turning Gouges [Pre-owned]
Revised
4 Diamic Henry Taylor Turning Gouges [Pre-owned]
4 Henry Taylor DIAMIC brand turning tools which have seen very little use (one cracked ferule). HS1 - Superflute Gouge: A high-performance, general-purpose gouge. Often used for bowl turning and considered more versatile than traditional bowl gouges. 1/2 inch (13mm) cutting edge and 5/8 inch (16mm) bar.The original Superflute HS1, designed in 1978 by Roy Child, has sold in thousands all over the...
£210.00 inc VAT

Gifkins Standard Dovetail Jig [Pre-owned, As new]Gifkins Standard Dovetail Jig [Pre-owned, As new]
Special Offer
Gifkins Standard Dovetail Jig [Pre-owned, As new]
Fancy making some boxes without getting too bogged down with marking, measuring, sawing, chiselling and swearing? This is a commission sale of this popular and easy to use Dovetail jig which you can learn all about here: Gifkins A10 Dovetail Jig This is available brand new for £345 as you can see, but this is an unused item from one of our customers and is a commission sale. As new, unused. This...
£255.00 (VAT exempt)
Norris No.20E Shoulder Plane [Rare, Vintage]Norris No.20E Shoulder Plane [Rare, Vintage]
Special Offer
Norris No.20E Shoulder Plane [Rare, Vintage]
This plane has been professionally restored although you wouldn't know this unless we told you as the restoration is perfectly done. The steel soled mouth is tight and true. Gunmetal body with lovely ebony infil and wedge. A very nice shoulder plane which bears the dings and marks of use. There is little left of the original Norris blade (clearly stamped with Norris London) hence the...
£295.00 inc VAT

Stanley 45 Combination Plane in Original Metal Box [Pre-owned]Stanley 45 Combination Plane in Original Metal Box [Pre-owned]
Stanley 45 Combination Plane in Original Metal Box [Pre-owned]
This is a Stanley 45 Universal Plane It is in very good working order and has its spur cutters and original fittings. Unused set of 21 boxed cutters to include. 6 beading cutters. Two match cutters. One sash cutter. 11 plow and dado cutters. One fillester cutter (please ignore the wooden rods in the photo, they are to help with packing in the metal box only!) The plane is in very...
£145.00 inc VAT
Page: First | | 54 | 55 | 56 | 57 | 58 |