Category
Brand
Collection
Price
Additional Filters
2931 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]
Sold
Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]
This pre-owned plane has a few minor scratch marks on the sole but this plane has seen little use. No box but comes with a Lie-Nielsen branded plane sack. This is what we say about the plane in the main Lie-Nielsen section of our web site: ''The Lie-Nielsen No.62 Low Angle Jack Plane. What is not to like? You take the most popular and useful jack plane and bed it at a low angle (12°)....
£260.00 inc VAT
Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]
Pre-owned in fabulous condition, as new. ''The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas. The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane.'' The equivalent of a later type Stanley Bedrock No.607 jointer plane. 22''...
£525.00 inc VAT
Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]
Pre-owned in fabulous condition, as new. The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a levelled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade. A2...
£495.00 inc VAT
Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New, SOLD]Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New, SOLD]
In fabulous condition, as new. "Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10 3/8'' (264mm) long. 2 3/8'' (60mm) blade. A2 steel. Iron body 5½lbs (2.5kg).''
£395.00 inc VAT
Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]
Sold
Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]
This is a commission sale. Used but in G++ condition 3/8” straight blade. Reversible curved/straight detachable fence. Instruction leaflet. This is our description from our LN section… “A router plane is a great tool for working shallow mortices - hinge gains, inlay, door locks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley...
£198.00 inc VAT
Replacement Blades for Veritas Chair DevilsReplacement Blades for Veritas Chair Devils
Replacement Blades for Veritas Chair Devils
These high-carbon steel replacement blades are for use with the Veritas Chair Devils. At 0.040'' thick, they are hardened to Rc48-52 and come with a finely ground 45° cutting edge.
£14.75 inc VAT
ECLIPSE No.36 - Honing Guide [Preowned, SOLD]ECLIPSE No.36 - Honing Guide [Preowned, SOLD]
Sold
ECLIPSE No.36 - Honing Guide [Preowned, SOLD]
Pre-owned. Original box, with (faded but readable) instruction leaflet. Good condition.
£20.00 inc VAT
Lie-Nielsen No.48 - Tongue & Groove Plane [Preowned, SOLD]Lie-Nielsen No.48 - Tongue & Groove Plane [Preowned, SOLD]
Sold
Lie-Nielsen No.48 - Tongue & Groove Plane [Preowned, SOLD]
Pre-owned, probably unused. With a Lie-Nielsen branded plane sack. The Lie-Nielsen Tongue & Groove plane cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster...
£285.00 inc VAT
Lie-Nielsen SD-1 - Nicker Screwdriver [Preowned, SOLD]Lie-Nielsen SD-1 - Nicker Screwdriver [Preowned, SOLD]
Sold
Lie-Nielsen SD-1 - Nicker Screwdriver [Preowned, SOLD]
The SD-1 Nicker Screwdriver is made to fit the slotted screw securing the old style knife nickers on the LN. 10-1/4 Bench Rabbet Plane (from 2018 or earlier). They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, correctly sized to fit the screw slots, giving you good power and control, without slipping. 5" Approximate Overall Length .156"...
£36.00 inc VAT
Japanese Skew Chisel - Suminagashi [Preowned, SOLD]Japanese Skew Chisel - Suminagashi [Preowned, SOLD]
Sold
Japanese Skew Chisel - Suminagashi [Preowned, SOLD]
36mm wide red oak handled unused Suminagashi chisel which for some reason has been expertly skewed along its 36mm blade edge. So this is now a laminated steel 36mm wide skew chisel. Triple fluted hollows. Little or very little use. The skew is right to left (high to low) when looking down the handle. The handle has also had a flat introduced into the handle so that the blade lies totally flat when...
£60.00 inc VAT
Auriou Riffler - 195mm Grain 12 [Clearance, SOLD]Auriou Riffler - 195mm Grain 12 [Clearance, SOLD]
Sold
Auriou Riffler - 195mm Grain 12 [Clearance, SOLD]
A riffler is a rasp with 2 shaped ends. Tapered curved triangle with cut edges plus tapered curved lozenge. The photos will best describe these. They haven't been used but show cosmetic staining here and there. All good to refine the shape of your latest wonderful wooden creation. Hand stitched teeth. Octagonal handle for comfort. 195mm from tip to tip. The stitched riffler ends...
£30.00 inc VAT
Auriou Riffler - 195mm Grain 10 [Clearance, SOLD]Auriou Riffler - 195mm Grain 10 [Clearance, SOLD]
Sold
Auriou Riffler - 195mm Grain 10 [Clearance, SOLD]
A riffler is a double end rasps with different shapes on each end. Curved flat with cut edges one end with a tapered curved triangle with cut edges. The photos will best describe these. They haven't been used but show cosmetic staining here and there. All good to refine the shape of your latest wonderful wooden creation. Hand stitched teeth. Octagonal handle for comfort. 195mm...
£30.00 inc VAT
Lie-Nielsen - Bevel Edged Chisels (O1 Steel) - Set of 5 in Tool Roll [Preowned, As New, SOLD]Lie-Nielsen - Bevel Edged Chisels (O1 Steel) - Set of 5 in Tool Roll [Preowned, As New, SOLD]
Sold
Lie-Nielsen - Bevel Edged Chisels (O1 Steel) - Set of 5 in Tool Roll [Preowned, As New, SOLD]
The original O1 chisel set 5 chisels in O1 steel. 1/8", 1/4", 3/8", 1/2" & 3/4" wide. Lie-Nielsen Leather tool roll. Most bench chisel makers now use A2 steel (or in the case of Veritas, PMV11), in the making of their chisels. Basically this steel offers an improvement in edge retention although it is more difficult to sharpen. O1 steel, on the other hand,...
£475.00 inc VAT
Lie-Nielsen - Dovetail Saw in Saw Case [Preowned, SOLD]Lie-Nielsen - Dovetail Saw in Saw Case [Preowned, SOLD]
Sold
Lie-Nielsen - Dovetail Saw in Saw Case [Preowned, SOLD]
Little used in great condition. 15ppi. RIP cut Lie-Nielsen Saw case. This is a classic LN dovetail saw with a blade length of 10" (250mm)
£185.00 inc VAT
Lie-Nielsen No.5 - Jack Plane [Preowned, SOLD]Lie-Nielsen No.5 - Jack Plane [Preowned, SOLD]
Sold
Lie-Nielsen No.5 - Jack Plane [Preowned, SOLD]
Used. The equivalent of a later type Stanley Bedrock No.605 jack plane. 14" long (355mm) 2" wide blade (50mm) Iron body 5-1/2lbs (2.5kg) Selling on our main site for £469 (currently out of stock though) This plane has been used and shows scratch wear consistent with light use. It is in ready to go mode. Condition is G++ Supplied with Lie-Nielsen branded tool sack.
£365.00 inc VAT
Lie Nielsen No.51 - Shooting Board Plane [Preowned, SOLD]Lie Nielsen No.51 - Shooting Board Plane [Preowned, SOLD]
Sold
Lie Nielsen No.51 - Shooting Board Plane [Preowned, SOLD]
Pre-owned, little used. "The Lie-Nielsen Shooting Board Plane is a single purpose plane designed to trim mitres and other end grain cuts on a shooting board. Stanley first made its version in 1909 along with a metal shooting board. Lie-Nielsen had many requests for this tool over the years, so we are pleased they redesigned the Stanley version. The Lie-Nielsen version utilises a standard 60mm (2.3/8")...
£675.00 inc VAT
Veritas Fine Dovetail Saw [Preowned, SOLD]Veritas Fine Dovetail Saw [Preowned, SOLD]
Sold
Veritas Fine Dovetail Saw [Preowned, SOLD]
Used but in very good condition. Superficial marking to handle. Little wear to the blade. "The Veritas Fine Cut Dovetail Saw (20tpi) is best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury. The Veritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics...
£40.00 inc VAT
Lie-Nielsen SD-3 - Saw Nut Screwdriver [Preowned, SOLD]
Sold
Lie-Nielsen SD-3 - Saw Nut Screwdriver [Preowned, SOLD]
Tenon saw nut and thicknessing gauge screwdriver. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles) Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blades, numbered...
£36.00 inc VAT
Lie-Nielsen SD-6 - Block Plane Screwdriver [Preowned, SOLD]
Sold
Lie-Nielsen SD-6 - Block Plane Screwdriver [Preowned, SOLD]
Screwdriver for the No.140 skew block plane. This screwdriver is made to fit the fence and side plate locking screws on our Low Angle Skew Block Planes. It also fits the cap screw on our No. 60 1/2 Block Plane. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles). Modelled after gunsmith’s screwdrivers with machined...
£42.00 inc VAT
Lie-Nielsen SD-8 - Plane Handle Toe Screwdriver [Preowned, SOLD]
Sold
Lie-Nielsen SD-8 - Plane Handle Toe Screwdriver [Preowned, SOLD]
Pre-owned, in good condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles). Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blade. This screwdriver is made to fit the toe screw on Lie-Nielsen...
£40.00 inc VAT
Lie-Nielsen SD-9 - Honing Guide Screwdriver [Preowned, SOLD]
Sold
Lie-Nielsen SD-9 - Honing Guide Screwdriver [Preowned, SOLD]
Pre-owned, in great condition with a few dings to the handle. This screwdriver is made to fit the captive screws in the removable jaws for our Honing Guide. It may be useful for other jobs as well. 5.40'' Overall Length .285'' Blade Diameter .045'' Tip Thickness Curly Maple Handle (newer versions have cherry handles). Modeled after gunsmith’s screwdrivers...
£42.00 inc VAT
Lie-Nielsen No.40 1/2 - Scrub Plane [Preowned, Unused, SOLD]Lie-Nielsen No.40 1/2 - Scrub Plane [Preowned, Unused, SOLD]
Sold
Lie-Nielsen No.40 1/2 - Scrub Plane [Preowned, Unused, SOLD]
Pre-owned, unused with a Lie-Nielsen branded plane sack. This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane. It is also useful for shaping irregular objects or creating an interesting finished surface. The Lie Nielsen Scrub Plane has a cast Iron...
£235.00 inc VAT
3 Gimlets with Boxwood Handles [Preowned, SOLD]
Sold
3 Gimlets with Boxwood Handles [Preowned, SOLD]
These lovely vintage gimlets 170mm, 130mm & 90mm. These will always find use in your workshop.
£18.00 inc VAT
Lie-Nielsen No.8 - Jointer Plane [Preowned, Unused, SOLD]Lie-Nielsen No.8 - Jointer Plane [Preowned, Unused, SOLD]
Sold
Lie-Nielsen No.8 - Jointer Plane [Preowned, Unused, SOLD]
Pre-owned Lie-Nielsen Toolworks No.8 jointer plane, unused with a Lie-Nielsen branded plane sack. This is the big boy! The Lie-Nielsen No.8 Jointer, a real whopper of a plane. It is the largest production plane at 24" (610mm). It will flatten and true like no other. 24" (610mm) long. 2-5/8" (66mm) wide blade. A2 steel. Iron body, 10lbs (4.5kg). Selling brand new...
£575.00 inc VAT
Lie-Nielsen - Spare Blade for a LN 97 Large Chisel Plane [Preowned, Unused, SOLD]Lie-Nielsen - Spare Blade for a LN 97 Large Chisel Plane [Preowned, Unused, SOLD]
Sold
Lie-Nielsen - Spare Blade for a LN 97 Large Chisel Plane [Preowned, Unused, SOLD]
As new, pre-owned. Replacement blade for the Lie-Nielsen No. 97 Large Chisel Plane.
£75.00 inc VAT
Lie-Nielsen - Spare Blade for a LN 7 1/2 Low Angle Jointer Plane [Preowned, Unused, SOLD]Lie-Nielsen - Spare Blade for a LN 7 1/2 Low Angle Jointer Plane [Preowned, Unused, SOLD]
Sold
Lie-Nielsen - Spare Blade for a LN 7 1/2 Low Angle Jointer Plane [Preowned, Unused, SOLD]
As new, pre-owned. Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel. 2.300" wide x .240" thick A2 cryogenically treated Tool Steel
£72.00 inc VAT
Lie-Nielsen - 2'' Plane Frog (50 degree) [Preowned, SOLD]Lie-Nielsen - 2'' Plane Frog (50 degree) [Preowned, SOLD]
Sold
Lie-Nielsen - 2'' Plane Frog (50 degree) [Preowned, SOLD]
Pre-owned, probably unused. With a Lie-Nielsen branded plane sack. If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog. Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches...
£115.00 inc VAT
Lie-Nielsen - 2 3/8'' Plane Frog (50 degree, York Pitch) [Preowned, SOLD]Lie-Nielsen - 2 3/8'' Plane Frog (50 degree, York Pitch) [Preowned, SOLD]
Sold
Lie-Nielsen - 2 3/8'' Plane Frog (50 degree, York Pitch) [Preowned, SOLD]
Pre-owned, probably unused. With a Lie-Nielsen branded plane sack. If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog. Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches...
£115.00 inc VAT
Lie-Nielsen - 2 3/8'' Plane Frog (55 degree, Middle Pitch) [Preowned, SOLD]Lie-Nielsen - 2 3/8'' Plane Frog (55 degree, Middle Pitch) [Preowned, SOLD]
Sold
Lie-Nielsen - 2 3/8'' Plane Frog (55 degree, Middle Pitch) [Preowned, SOLD]
Pre-owned, probably unused. With a Lie-Nielsen branded plane sack. If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog. Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches...
£115.00 inc VAT
Lie Nielsen No.102 - Low Angle Block Plane (Bronze) [Preowned, Unused, SOLD]Lie Nielsen No.102 - Low Angle Block Plane (Bronze) [Preowned, Unused, SOLD]
Sold
Lie Nielsen No.102 - Low Angle Block Plane (Bronze) [Preowned, Unused, SOLD]
Pre-owned in great condition with plane sock. The Lie-Nielsen small bronze Low Angle Block Plane fits perfectly in the hand and slips easily into the pocket. The 5¼" body holds a 1¼" x 1/8" thick blade. An unobtrusive stainless steel adjuster offers blade control of micrometer ease and precision with minimum backlash. The mouth is not adjustable. The blade in the...
£135.00 inc VAT
Lie-Nielsen No.40B - Butt Mortise Plane [Preowned, Unused, SOLD]Lie-Nielsen No.40B - Butt Mortise Plane [Preowned, Unused, SOLD]
Sold
Lie-Nielsen No.40B - Butt Mortise Plane [Preowned, Unused, SOLD]
Pre-owned - never used, in Lie-Nielsen plane sock. The Butt Mortice is a simple to use plane that produces precise mortices of uniform depths with sharp, square corners. The body is cast iron with a bronze blade cap, and the handles are polished cherry. The sole has a long slot that gives a clear view of your work and allows for quick removal of shavings. The plane measures 9 3/4''...
£165.00 inc VAT
Lie-Nielsen No.507 - Rebating Block Plane (NO KNICKERS!) [Preowned, SOLD]Lie-Nielsen No.507 - Rebating Block Plane (NO KNICKERS!) [Preowned, SOLD]
Sold
Lie-Nielsen No.507 - Rebating Block Plane (NO KNICKERS!) [Preowned, SOLD]
NO KNICKERS AGAIN! (we sold another of these a couple of weeks ago). This again is pre-owned in little used condition with Lie-Nielsen branded plane sack The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R). This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable...
£165.00 inc VAT
Auriou - 10mm Ironing Rasp (Hand-stitched with Half-round Bottom) [Preowned, SOLD]Auriou - 10mm Ironing Rasp (Hand-stitched with Half-round Bottom) [Preowned, SOLD]
Sold
Auriou - 10mm Ironing Rasp (Hand-stitched with Half-round Bottom) [Preowned, SOLD]
A little bit of French magic! The cranked handle allows knuckle clearance. We have supplied the appropriate handle, which can be removed. This rasp is stitched in the underside only and is convex shaped across its 10mm width (only). 55mm of the length is ''stitched'' This is grain 12 which is deemed fine so this little beauty is for detailed work on relatively small...
£30.00 inc VAT
Rabone & E Preston & Sons - Boxwood & Brass Rules [Preowned, SOLD]Rabone & E Preston & Sons - Boxwood & Brass Rules [Preowned, SOLD]
Sold
Rabone & E Preston & Sons - Boxwood & Brass Rules [Preowned, SOLD]
3 nice boxwood & brass rules. These are all in good condition. A light clean will dislodge any lingering cosmetic marks. 4'' caliper rule No.1466 - Rabone. 24'' four fold rule - No.1380 - Rabone 48'' four fold rule - No.3276 - E. Prestons & Sons Birmingham
£36.00 inc VAT
Flexcut FRP310 - Beginners 5 piece Carving Set - Palm Handles [Preowned, SOLD]Flexcut FRP310 - Beginners 5 piece Carving Set - Palm Handles [Preowned, SOLD]
Sold
Flexcut FRP310 - Beginners 5 piece Carving Set - Palm Handles [Preowned, SOLD]
5 carving tools comprising.. Series 3 (shallow gouge) 9mm Series 6 (medium gouge) 8mm Series 11 (veining gouge) 3mm V parting tool - 6mm Skew chisel 8mm Used just a handful of times (if that!) so in almost new condition in the original box. The handles are short, shaped cherry handles designed to fit into your palm. Made by Flexcut USA (FRP310) If you need some lime to practise...
£85.00 inc VAT
Woodpeckers - 600mm Rule with Rule Stop 2 [Preowned, Unused, SOLD]Woodpeckers - 600mm Rule with Rule Stop 2 [Preowned, Unused, SOLD]
Sold
Woodpeckers - 600mm Rule with Rule Stop 2 [Preowned, Unused, SOLD]
Unused, as new. The rule reads left to right up to 600mm on one bevelled edge. 0-300mm from the centre on the other edge. This is supplied with a Rule Stop 2 to help you repeat accurate marking out. (Note - The ends of the rule have threaded holes that allow you to mount an optional Hook Stop)
£72.00 inc VAT
15 Quality Ash Chisel Handles (with Brass Ferrules) [Clearance, SOLD]15 Quality Ash Chisel Handles (with Brass Ferrules) [Clearance, SOLD]
Sold
15 Quality Ash Chisel Handles (with Brass Ferrules) [Clearance, SOLD]
The octagonal ash handles are all 130mm including a tapered brass ferrule Suitable for bench chisels or carving tools. Clear lacquer finish to show off the grain. Five 17mm wide handles with 13mm wide ferrules. Seven 19mm wide handles with 13mm ferrules. One 22mm wide handles with 15mm ferrule. One 26mm wide handle with 17mm ferrule. One 28mm wide handle with 20mm ferrule.
£65.00 inc VAT
Woodpeckers One Time Tool - Large Steel & Aluminium Panel Gauge [Preowned, SOLD]Woodpeckers One Time Tool - Large Steel & Aluminium Panel Gauge [Preowned, SOLD]
Sold
Woodpeckers One Time Tool - Large Steel & Aluminium Panel Gauge [Preowned, SOLD]
600mm with 1mm graduations on a round bar. 165mm fence. Screw out turnscrew at one end with a circular marking cutter at the business end. This screams quality. A heavy duty item.
£88.00 inc VAT
Lie-Nielsen - Burnisher [Preowned, SOLD]Lie-Nielsen - Burnisher [Preowned, SOLD]
Sold
Lie-Nielsen - Burnisher [Preowned, SOLD]
Pre-owned but little used. Creating a burr on a scraper requires a hard, highly polished surface. The Lie-Nielsen Toolworks carbide burnisher has a 4" polished solid carbide shank held in a maple handle. A flared brass bolster protects your newly manicured fingers whilst burnishing.
£55.00 inc VAT
Modelmark - Steel Number Stamps - 2.5mm [Preowned, SOLD]Modelmark - Steel Number Stamps - 2.5mm [Preowned, SOLD]
Sold
Modelmark - Steel Number Stamps - 2.5mm [Preowned, SOLD]
Pre-owned, used but looking even crisper than Uncle Albert on a night out. 0-9 numbers - 2.5mm (3/32'') stamps in plastic case.
£12.00 inc VAT
Modelmark - Steel Number stamps - 3mm [Preowned, SOLD]Modelmark - Steel Number stamps - 3mm [Preowned, SOLD]
Sold
Modelmark - Steel Number stamps - 3mm [Preowned, SOLD]
Pre-owned, used but looking crisp. 0-9 numbers - 3mm stamps in a plastic storage case.
£12.00 inc VAT
Lie-Nielsen No.66 - Bronze Beading Plane (with Cutters) [Preowned, SOLD]
Sold
Lie-Nielsen No.66 - Bronze Beading Plane (with Cutters) [Preowned, SOLD]
Pre-owned but in fine condition. The 7 double ended profiled blades are supplemented by 7 blanks (all in unused condition). Both fences, one straight, one curved for large radius work. Thomas Lie-Nielsen talks you through the 66, use, care and maintenance. https://www.lie-nielsen.com/products/bronze-beading-tool-and-blade-set Lie-Nielsen still offers this tool in the iron version only (see our...
£425.00 inc VAT
Lie-Nielsen No.7 - Jointer Plane [Preowned, SOLD]Lie-Nielsen No.7 - Jointer Plane [Preowned, SOLD]
Sold
Lie-Nielsen No.7 - Jointer Plane [Preowned, SOLD]
Pre-owned but you wouldn't think so. In great condition, with Lie-Nielsen branded tool sock (no box). This is the specification and description from the Lie Nielsen Toolworks section of our web site where it retails for £580. "The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas. The late, great Alan Peters used his No.7 for pretty much everything, and...
£485.00 inc VAT
Woodpeckers - 900mm Edge Rule [Preowned, Unused, SOLD]Woodpeckers - 900mm Edge Rule [Preowned, Unused, SOLD]
Sold
Woodpeckers - 900mm Edge Rule [Preowned, Unused, SOLD]
Pre-owned but unused and in fine condition. 900mm Woodpeckers Edge Rule. ''Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to keep the rule parallel to...
£38.00 inc VAT
Set of 4 Butt Chisels - Pfeil Swiss Made [Preowned, SOLD]Set of 4 Butt Chisels - Pfeil Swiss Made [Preowned, SOLD]
Sold
Set of 4 Butt Chisels - Pfeil Swiss Made [Preowned, SOLD]
Set of 4 Butt Chisels - Pfeil Swiss Made Pre-owned but these look unused. Slight staining to the plum wood handles. 6mm, 12mm, 19mm & 25mm 155mm overall length including handle. The 4 chisels come with a wooden storage block.
£65.00 inc VAT
Glen Drake - File Burnisher [Preowned, SOLD]Glen Drake - File Burnisher [Preowned, SOLD]
Sold
Glen Drake - File Burnisher [Preowned, SOLD]
Glen Drake - File Burnisher The File Burnisher from Glen-Drake Toolworks is a combination tool for sharpening a card scraper, cabinet scraper, or scraper plane. One face of the tool is a very fine (70 tpi) file used to joint the scraper edge. The other face is a polished, flat burnisher used to create the cutting burr on the edge of a scraper after filing. The tool edges are rounded and polished,...
£25.00 inc VAT
Lie Nielsen Toolworks - Progressive Pitch Dovetail Saw with leather case [Preowned, SOLD]Lie Nielsen Toolworks - Progressive Pitch Dovetail Saw with leather case [Preowned, SOLD]
Sold
Lie Nielsen Toolworks - Progressive Pitch Dovetail Saw with leather case [Preowned, SOLD]
Lie Nielsen Toolworks - Progressive Pitch Dovetail Saw with leather case. Pre-owned but little used (if at all). This special saw with its progressive pitch begins with 16 teeth per inch at the toe and ends with 9 tpi at the heel. In all other respects it is identical to the older LN dovetail saw. Open curly maple handle. 10" blade. Brass backed. Quality Lie Nielsen leather saw sheath. Some...
£185.00 inc VAT
4 Ashley Iles Bevel Edge Chisels [Preowned, SOLD]4 Ashley Iles Bevel Edge Chisels [Preowned, SOLD]
Sold
4 Ashley Iles Bevel Edge Chisels [Preowned, SOLD]
Bevel Edge chisels made by Ashley Iles. These have Beech handles and brass ferules. Overall length inc handle: 300mm Widths: 1/4'', 1/2'', 3/4'', 1'' The blades just need a good clean.
£60.00 inc VAT
Page: First | | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | | Last