Best Selling

Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]

Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]

This is a little cutey measuring 5'' X 2'' high x 1'' wide (excluding the wedge and blade) No makers mark and we think this is owner made (T SHARP stamped on the wedge). The mouth requires a tiny filing to bring it to square. The infill and wedge are very well done. Good iron with 3/4'' remaining. We haven't cleaned this as we don't like buffing old...

£72.00 inc VAT

Record 722 Small Router Plane [Vintage, SOLD]

Record 722 Small Router Plane [Vintage, SOLD]

This webpage will tell you more about this little English router plane: Record 722 Router Plane One 1/4" straight blade. No box.

£36.00 inc VAT

5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]

5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]

4 of these gouges have matching London pattern boxwood handles (the smallest has a 1'' split near the brass ferrule). The shorter gouges are ½'', ¾'', 1'' & 1 ½'' wide with a medium sweep. The blade lengths vary from 4'' (100mm) – 5'' (125mm). The 5th gouge has a very slightly different London pattern boxwood...

£150.00 (VAT exempt)

Woodpeckers – 300mm Rule (with Rule Stop) [Preowned, SOLD]

Woodpeckers – 300mm Rule (with Rule Stop) [Preowned, SOLD]

Pre-owned but these items have seen very little use. The 300mm rule reads from the centre on one edge and left to right on the other edge. Each edge is bevelled. Very crisp white markings at 1mm increments. This rule has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are...

£55.00 inc VAT

Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned, SOLD]

Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned, SOLD]

Pre-owned but in G+ to Fine condition The rule reads left to right up to 900mm on one bevelled edge. 0-450mm from the centre on the other edge. The ''0'' mark is the exact centre of the rule, with the scale running in both directions from that point. Its quick and easy to move the rule to locate centre of a board and then lay out equal spacing from that point Engraving tolerance...

£118.00 inc VAT

Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]

Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]

Pre-owned in as new condition with LN plane sack. This is out of stock in our Lie-Nielsen plane section where it retails for £595. It is a popular plane. Hopefully we will be getting fresh stock during the summer. This is what we say about the brand-new version on our main LN section. “Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or...

£495.00 inc VAT

Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New, SOLD]

Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New, SOLD]

An unused, “as new” plane with Lie-Nielsen branded plane sock. This is what we say about the plane in our Lie-Nielsen section… "A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers recommend starting out with due to its versatility. The equivalent of a later type Stanley Bedrock No.605½. 14-3/4"...

£455.00 inc VAT

Brusso Hardware – HD-638 Quadrant Hinge [Clearance, SOLD]

Brusso Hardware – HD-638 Quadrant Hinge [Clearance, SOLD]

Old stock (same as the new stock) but with old style packaging. This is new old stock – we are offering one pair of this hinge which is popular with box makers. The Brusso HD-638 brass quadrant hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The arc is morticed into the side of the box, beneath the leaf. The hinge is sold in pairs. Each leaf measures...

£54.00 inc VAT

Veritas PM-V11 – 2'' Blade [Preowned, As New, SOLD]

Veritas PM-V11 – 2'' Blade [Preowned, As New, SOLD]

This is a straight replacement iron for a Veritas No.4 or No.5 ¼ hand plane or can be fitted to Stanley or Record No.4 or No.5 bench planes.. The blade is slightly thicker than the old Record & Stanley planes so some minor adjustment made be necessary to the mouth and the pawl. Pre-owned but appears unused. 1/10” thick. PM-V11 blade. Normally selling for about £62...

£45.00 inc VAT

DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]

DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]

That’s DC for David Charlesworth of Hartland, Devon, England. This marking knife hasn’t left it’s packaging so is new, unused stock. These marking knives were made to David’s specification by (almost a rock star) Phil Edwards of Philly Planes fame

£45.00 inc VAT

Mappa Toolworks Mallet [Preowned, As New, SOLD]

Mappa Toolworks Mallet [Preowned, As New, SOLD]

A commission sale. As new, unused. This has a lovely blackwood handle with an infused maple head. It weighs 650g Overall height of 215mm with a 90mm deep head, 60mm diameter. Mappa (Netherlands) didn’t really get going as a tool making concern. 2 great hand tool enthusiasts got too busy with life, work and other distractions to build their portfolio of tools (where is that travisher boys??)...

£95.00 (VAT exempt)

Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]

Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]

They may look a bit scruffy but in fact that is just dried oil in the photos which disguises tools in G++ condition with full blades and nice rosewood knobs. This pair will clean up nicely. Patent date of Jan 95 (that will be 1895!).

£138.00 inc VAT

4 Small Beech Rebate Planes [Preowned, SOLD]

4 Small Beech Rebate Planes [Preowned, SOLD]

All with the same owners stamp C Gibson. Convex from front to toe. 4 1/8” long C NURSE & CO. LONDON (owners stamp R. Gibson) Boat shaped sole. 4 ½” long. NURSE (C Gibson) Straight rebate. 4 ½” long. NURSE (C Gibson) Rounded sole. 4” long. (R. Gibson) All the wedges and irons are in g++ condition. It is a sweet collection. We have given...

£60.00 inc VAT

3 Vintage Mortise Chisels [Vintage, SOLD]

3 Vintage Mortise Chisels [Vintage, SOLD]

These beauties (2 stamped BUCK and the larger one stamped I & H SORBY) I & H SORBY – octagonal handle – ½” wide BUCK – oval handle 3/16” wide BUCK – oval handle 3/8” wide Great condition. 11 1/2” - 12 ¼” overall length.

£72.00 inc VAT

Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]

Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]

The 2 ¼” wide iron is by Buck Owners stamp C Gibson

£24.00 inc VAT

Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New, SOLD]

Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New, SOLD]

Unused – pre-owned, as new Exactly the same chisel sells in our LN section for £138.

£108.00 inc VAT

9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]

9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]

Beech handles with brass ferules. This is a lovely drawknife which will serve you well for many a chair leg. The makers stamp is a little indistinct but it is Marsden Brothers. Owner’s stamp of C GIBSON

£58.00 inc VAT

5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]

5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]

These 10 planes are all in G++ condition. We haven’t cleaned them up, but they will clean up beautifully. The wedges are all fine and the blades are working well. The planes are all stamped with the same owner’s stamp "C GIBSON" They came out of a joiner’s chest with some other tools featured in this week’s Fridays Finds. Pairs of No. 2, 4, 10, 12 &...

£88.00 inc VAT

Vintage Beech & Brass Brace – Lovely Patina [Preowned, SOLD]

Vintage Beech & Brass Brace – Lovely Patina [Preowned, SOLD]

There is no makers mark for this beech hand brass with brass escutcheons. The brass button that releases your bit from the brace is stiff (but you would be after 100 years or so) but it is working and will free up. This brace has a lovely patina. The head rotates freely as it should . The head may be rosewood but years of grubby carpenters hands have deposited blood sweat and tears all over the...

£42.00 inc VAT

Sorby Lock Mortise Chisel [Preowned, SOLD]

Sorby Lock Mortise Chisel [Preowned, SOLD]

A handsome lock mortise chisel. 18” overall including a stubby 3'' oak handle. 1/2'' wide. Owners stamp - "C GIBSON" This beast will clean up very well.

£25.00 inc VAT

Woodpeckers Woodworking Rule 300mm [Preowned, As New, SOLD]

Woodpeckers Woodworking Rule 300mm [Preowned, As New, SOLD]

Pre-owned but unused. Reads from the centre on one edge and left to right on the other edge. Each edge is bevelled. Very crisp white markings 1mm increments. This rule has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are straighter, heavier and are easier to handle than any others...

£30.00 inc VAT

Lie-Nielsen No.5 1/2 - Jack Plane [Preowned, As New, SOLD]

An unused, as new plane with Lie-Nielsen branded plane sock. Pre-owned but we don’t think the owner did much more that take it out of the box and stick in the plane sock. It is in great condition. This is what we say about the plane in our Lie-Nielsen section… "A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers...

£455.00 inc VAT

Boxed Set of 5 Narex Bevel Edge Chisels [Preowned, SOLD]

Boxed Set of 5 Narex Bevel Edge Chisels [Preowned, SOLD]

Pre-owned but sparsely used, they have been sharpened. Good to go to work. These are The Narex Richter chisels, a very well made and designed all-round bench chisel. The base of the box has some scratch marks but is in otherwise G++ condition. The chisels are also in G++ - F condition. 6mm, 9mm, 12mm, 19mm & 25mm wide. Ash hardwood handles have solid stainless steel ferrules and...

£100.00 inc VAT

Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New, SOLD]

Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New, SOLD]

Pre-owned, unused, as new. No box but Lie-Nielsen branded plane sack. Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10-3/8" (264mm) long. 2-3/8" (60mm) blade. A2 steel. Iron body...

£410.00 inc VAT

Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned, SOLD]

Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned, SOLD]

Infused curly maple head with an attractive beech handle. Brass ferrule. There are 3 or 4 minor dinks (2mm x 2mm) on the head (easily missed at first glance) and some superficial scratches consistent with just a few malet blows. This mallet has not been used much at all. We don't think this particular combination of handle/head is available currently.

£84.00 inc VAT

Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]

Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]

This pre-owned plane has a few minor scratch marks on the sole but this plane has seen little use. No box but comes with a Lie-Nielsen branded plane sack. This is what we say about the plane in the main Lie-Nielsen section of our web site: ''The Lie-Nielsen No.62 Low Angle Jack Plane. What is not to like? You take the most popular and useful jack plane and bed it at a low angle (12°)....

£260.00 inc VAT

Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]

Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]

Pre-owned in fabulous condition, as new. ''The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas. The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane.'' The equivalent of a later type Stanley Bedrock No.607 jointer plane. 22''...

£525.00 inc VAT

Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]

Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]

Pre-owned in fabulous condition, as new. The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a levelled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade. A2...

£495.00 inc VAT

Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New, SOLD]

In fabulous condition, as new. "Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10 3/8'' (264mm) long. 2 3/8'' (60mm) blade. A2 steel. Iron body 5½lbs (2.5kg).''

£395.00 inc VAT

Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]

Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]

This is a commission sale. Used but in G++ condition 3/8” straight blade. Reversible curved/straight detachable fence. Instruction leaflet. This is our description from our LN section… “A router plane is a great tool for working shallow mortices - hinge gains, inlay, door locks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley...

£198.00 inc VAT

ECLIPSE No.36 - Honing Guide [Preowned, SOLD]

ECLIPSE No.36 - Honing Guide [Preowned, SOLD]

Pre-owned. Original box, with (faded but readable) instruction leaflet. Good condition.

£20.00 inc VAT

Lie-Nielsen No.48 - Tongue & Groove Plane [Preowned, SOLD]

Lie-Nielsen No.48 - Tongue & Groove Plane [Preowned, SOLD]

Pre-owned, probably unused. With a Lie-Nielsen branded plane sack. The Lie-Nielsen Tongue & Groove plane cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster...

£285.00 inc VAT

Lie-Nielsen SD-1 - Nicker Screwdriver [Preowned, SOLD]

Lie-Nielsen SD-1 - Nicker Screwdriver [Preowned, SOLD]

The SD-1 Nicker Screwdriver is made to fit the slotted screw securing the old style knife nickers on the LN. 10-1/4 Bench Rabbet Plane (from 2018 or earlier). They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, correctly sized to fit the screw slots, giving you good power and control, without slipping. 5" Approximate Overall Length .156"...

£36.00 inc VAT

Japanese Skew Chisel - Suminagashi [Preowned, SOLD]

Japanese Skew Chisel - Suminagashi [Preowned, SOLD]

36mm wide red oak handled unused Suminagashi chisel which for some reason has been expertly skewed along its 36mm blade edge. So this is now a laminated steel 36mm wide skew chisel. Triple fluted hollows. Little or very little use. The skew is right to left (high to low) when looking down the handle. The handle has also had a flat introduced into the handle so that the blade lies totally flat when...

£60.00 inc VAT

Auriou Riffler - 195mm Grain 12 [Clearance, SOLD]

Auriou Riffler - 195mm Grain 12 [Clearance, SOLD]

A riffler is a rasp with 2 shaped ends. Tapered curved triangle with cut edges plus tapered curved lozenge. The photos will best describe these. They haven't been used but show cosmetic staining here and there. All good to refine the shape of your latest wonderful wooden creation. Hand stitched teeth. Octagonal handle for comfort. 195mm from tip to tip. The stitched riffler ends...

£30.00 inc VAT

Auriou Riffler - 195mm Grain 10 [Clearance, SOLD]

Auriou Riffler - 195mm Grain 10 [Clearance, SOLD]

A riffler is a double end rasps with different shapes on each end. Curved flat with cut edges one end with a tapered curved triangle with cut edges. The photos will best describe these. They haven't been used but show cosmetic staining here and there. All good to refine the shape of your latest wonderful wooden creation. Hand stitched teeth. Octagonal handle for comfort. 195mm...

£30.00 inc VAT

Lie-Nielsen - Bevel Edged Chisels (O1 Steel) - Set of 5 in Tool Roll [Preowned, As New, SOLD]

Lie-Nielsen - Bevel Edged Chisels (O1 Steel) - Set of 5 in Tool Roll [Preowned, As New, SOLD]

The original O1 chisel set 5 chisels in O1 steel. 1/8", 1/4", 3/8", 1/2" & 3/4" wide. Lie-Nielsen Leather tool roll. Most bench chisel makers now use A2 steel (or in the case of Veritas, PMV11), in the making of their chisels. Basically this steel offers an improvement in edge retention although it is more difficult to sharpen. O1 steel, on the other hand,...

£475.00 inc VAT

Lie-Nielsen - Dovetail Saw in Saw Case [Preowned, SOLD]

Lie-Nielsen - Dovetail Saw in Saw Case [Preowned, SOLD]

Little used in great condition. 15ppi. RIP cut Lie-Nielsen Saw case. This is a classic LN dovetail saw with a blade length of 10" (250mm)

£185.00 inc VAT

Lie-Nielsen No.5 - Jack Plane [Preowned, SOLD]

Lie-Nielsen No.5 - Jack Plane [Preowned, SOLD]

Used. The equivalent of a later type Stanley Bedrock No.605 jack plane. 14" long (355mm) 2" wide blade (50mm) Iron body 5-1/2lbs (2.5kg) Selling on our main site for £469 (currently out of stock though) This plane has been used and shows scratch wear consistent with light use. It is in ready to go mode. Condition is G++ Supplied with Lie-Nielsen branded tool sack.

£365.00 inc VAT

Lie Nielsen No.51 - Shooting Board Plane [Preowned, SOLD]

Lie Nielsen No.51 - Shooting Board Plane [Preowned, SOLD]

Pre-owned, little used. "The Lie-Nielsen Shooting Board Plane is a single purpose plane designed to trim mitres and other end grain cuts on a shooting board. Stanley first made its version in 1909 along with a metal shooting board. Lie-Nielsen had many requests for this tool over the years, so we are pleased they redesigned the Stanley version. The Lie-Nielsen version utilises a standard 60mm (2.3/8")...

£675.00 inc VAT

Veritas Fine Dovetail Saw [Preowned, SOLD]

Veritas Fine Dovetail Saw [Preowned, SOLD]

Used but in very good condition. Superficial marking to handle. Little wear to the blade. "The Veritas Fine Cut Dovetail Saw (20tpi) is best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury. The Veritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics...

£40.00 inc VAT

Lie-Nielsen SD-3 - Saw Nut Screwdriver [Preowned, SOLD]

Tenon saw nut and thicknessing gauge screwdriver. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles) Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blades, numbered...

£36.00 inc VAT

Lie-Nielsen SD-6 - Block Plane Screwdriver [Preowned, SOLD]

Screwdriver for the No.140 skew block plane. This screwdriver is made to fit the fence and side plate locking screws on our Low Angle Skew Block Planes. It also fits the cap screw on our No. 60 1/2 Block Plane. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles). Modelled after gunsmith’s screwdrivers with machined...

£42.00 inc VAT

Lie-Nielsen SD-8 - Plane Handle Toe Screwdriver [Preowned, SOLD]

Pre-owned, in good condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles). Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blade. This screwdriver is made to fit the toe screw on Lie-Nielsen...

£40.00 inc VAT

Lie-Nielsen SD-9 - Honing Guide Screwdriver [Preowned, SOLD]

Pre-owned, in great condition with a few dings to the handle. This screwdriver is made to fit the captive screws in the removable jaws for our Honing Guide. It may be useful for other jobs as well. 5.40'' Overall Length .285'' Blade Diameter .045'' Tip Thickness Curly Maple Handle (newer versions have cherry handles). Modeled after gunsmith’s screwdrivers...

£42.00 inc VAT

Lie-Nielsen No.40 1/2 - Scrub Plane [Preowned, Unused, SOLD]

Lie-Nielsen No.40 1/2 - Scrub Plane [Preowned, Unused, SOLD]

Pre-owned, unused with a Lie-Nielsen branded plane sack. This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane. It is also useful for shaping irregular objects or creating an interesting finished surface. The Lie Nielsen Scrub Plane has a cast Iron...

£235.00 inc VAT

3 Gimlets with Boxwood Handles [Preowned, SOLD]

These lovely vintage gimlets 170mm, 130mm & 90mm. These will always find use in your workshop.

£18.00 inc VAT

Lie-Nielsen No.8 - Jointer Plane [Preowned, Unused, SOLD]

Lie-Nielsen No.8 - Jointer Plane [Preowned, Unused, SOLD]

Pre-owned Lie-Nielsen Toolworks No.8 jointer plane, unused with a Lie-Nielsen branded plane sack. This is the big boy! The Lie-Nielsen No.8 Jointer, a real whopper of a plane. It is the largest production plane at 24" (610mm). It will flatten and true like no other. 24" (610mm) long. 2-5/8" (66mm) wide blade. A2 steel. Iron body, 10lbs (4.5kg). Selling brand new...

£575.00 inc VAT

Category

Brand

Collection

Price

Additional Filters

Sort By

Per Page

View