Crown Tools Revolution 14'' Long Hollower with 2 Blades
The 14'' Long Hollower is one of the extras offered by Crown Tools for the Revolution Hollowing System.
A 3/4'' shaft machined down to 5/8'' to fit directly into the handle.
Supplied with Brass Clamp and 2 Long Hollower blades.
Lie Nielsen Toolworks – No.9 Mitre Plane with hotdog handle [Pre-owned]
Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]
This 36" pre-owned steel straight edge is 7/32'' thick by 2 1/2'' wide
Heavy duty to check for flatness with a miserly 0.0002'' tolerance per foot
In very good condition.
This tool was discontinued by Woodpeckers about 4 years ago.
A commission sale.
A Descent of Woodpeckers! - 4 Rule Bundle [Preowned, SOLD]
A group of Woodpeckers hanging together is known as a “descent.” This makes sense because most Woodpeckers start at the top of trees and then continue to work their way down. If you see a group of Wrens together, then you are witnessing a “herd” or “chime” of Wrens. A group of bullfinches is called a "bellowing".
6 pre-owned Woodpeckers tools!
Woodpeckers...
Henry Taylor Woodcarving Punch - Double Diamond
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Stanley No.50 Combination Plane [Preowned, Unused, SOLD]
It is quite easy to find this plane on reselling sites like Ebay etc. However, unlike many of the examples on those sites, this Stanley No.50 Combination plane is in unused, "as new" condition, in its original box (this has been drawn on in felt tip pen), with instruction leaflet, with the 17 cutters in the wooden cutter holder, has both spurs and the nickel plating is 95+ untarnished.
9 plough/dado...
Veritas 3 Saw Bundle [Pre-owned]
3 Veritas saws - A fine-tooth dovetail saw, a small X-Cut saw & a double edged flush cutting saw
Veritas Modified Skate Small Plough Plane
From 1 March 2016, Veritas Small Plough Planes will have a modified skate profile allowing the use of beading blades (all three sizes).
The skate on the new version of the plane is much narrower than the original. For anyone wishing to use an older model with the beading cutters, the narrower skate is available to retrofit to the existing plane.
Rider Shooting Board [Pre-owned]
The Rider Shooting Board is made from stable 20mm thick phenolic sheet with a hardwood fence and stainless hardware. The durable phenolic board is lightweight, it will not warp or twist, is water resistant and reduces friction. It is 500mm x 200mm with a 64mm wide track for your plane.
The fence can be fitted at either end of the board allowing it to be used right or left-handed. The centre of the...
Gyokucho 662 Ryoba Fine 240mm + Spare Blade
The Gyokucho 662 Ryoba Fine 240mm TPE (rubber) handle with a spare blade.
6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]
These are boxwood handled chisels have overall lengths between 330mm and 400mm
Pre-owned but these have seen little use. Commission sale.
1/4'', 3/8'', 5/8'', 3/4'', 1'' & 1 1/4''
Blue Spruce Toolworks – Set of 4 Dovetail Chisels [Pre-owned]
Gorgeous Cocobolo handled, delicate Blue Spruce Toolworks dovetail chisels in superb condition.
These were amongst Dave Jeske’s first chisels after he wowed everyone with his marking knives and awls about 20 years ago. Woodpeckers now make Blue Spruce tools but do not now offer these beauties.
8 1/2'' overall
Brass ferrules
1/8'', 1/4'', 3/8'' &...
Blue Spruce Toolworks – 3/8'' Fishtail Chisel [Pre-owned]
Beautiful handle – sparingly used (if at all), this also a classic from the old stable of Blue Spruce tools.
8 ½'' overall.
Saburrtooth 6mm Rotosaw - 3/4' x 1/4
15% discount from price shown.
Blue Spruce Toolworks – Small Awl [Pre-owned]
A beautiful African Blackwood handle adorns this small awl.
This has been sparingly used (if at all), this is another classic from the old stable of Blue Spruce tools.
6 ½'' overall.
Crown Tools Revolution Heart Cutter
Crown Tools Revolution Heart Cutter available in large and small.
Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]
This is a rare beast.
This example has been professionally re-nickel plated and 4 new blades have been made to complete the plane.
This plane was designed for the precision planing of dovetail joints.
The STANLEY 444 Dovetail plane was manufactured between 1912 and 1938 so it is very rare to find something so old in mint condition as the nickel plating always deteriorates over time if the...
Crown Tools Revolution Indexing Tool
Crown Tools Revolution Indexing Tool is used with the Texturing Tool.
Record No.50 Combination Plane [Preowned, Unused, SOLD]
This is in super unused condition with the instruction booklet.
The box is a bit tatty with a torn lid but the plane is in fine condition with all the bits n pieces, cutters etc all present and very correct.
Pre-owned, commission sale.
2 Beall Tool Co. Wood Threader Kits [Pre-owned, SOLD]
1" and 1 1/2".
Each complete kit contains: Wood Threader Router Attachment, specially made Internal Threading Tap, complete hardware for attachments, carbide router bit and full instructions.
Used very successfully but only once and as new.
Note that the Beall Tool Co was sold to Lee Valley and these threader kits and spares are now sold by Classic Hand Tools.
A commission sale.
Veritas Combination Plane with storage box & 7 cutters [Pre-owned]
Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
Veritas Side Rebate Plane [Preowned, SOLD]
Pre-owned plane in original box. Very little used. Commission sale.
This is the description of the plane which sells for £163 new.
The Veritas Side Rebate Plane is used for cleaning up or trimming sidewalls of rebates, dadoes or grooves to yield a perfect fit with its mate. It has a practical dual-blade configuration, coupled with an ingenious pivoting handle that permits right- or left-hand...
Lie-Nielsen Apron [Preowned, SOLD]
A branded one size fits all Lie Nielsen Toolworks woodshop apron.
1cm tear in the gusset, which would require 3 or 4 tidy stitches to repair.
Fraser, our model, has been walking round the carpark sassaying and twirling in a curiously suspicious manner in an attempt to show off the fit and functionality of the apron.
Apron only - tools and handsome model not included!
Commission sale.
IYOROI Japanese Chisels (with Boxwood Handles) - Set of 10 [Preowned, Unused, SOLD]
Still in their original box and wrapping, this set comprises of 10 chisels from the brand IYOROI.
223mm in overall length. Sizes are as follows..
3, 6, 9, 12,15,18, 24, 30, 36 & 42mm.
Hollow ground back with single flutes for widths 3mm, 6mm & 9mm. Double flutes for 12mm, 15mm & 18mm & triple Flutes for 24mm, 30mm, 36mm and 42mm
This is a commission sale from one of our...
2 Iyoroi Japanese Slick Chisels [Preowned, Unused, SOLD]
Unused paring chisels/slicks from Iyoroi who are makers from Japan.
Widths are 36mm & 42mm
All with single hollows.
Length overall of 580mm
Red Oak handles.
The blades are 120mm long. Bevel edged.
These are long paring chisels refered to as slicks and are used for cleaning up joints such as the mortise and tenon joints.
They are not design to be struck with a mallet or hammer.
A...
Iyoroi Japanese Diamond Backed Paring Chisel/Slick (24mm) [Preowned, Unused, SOLD]
Unused paring chisel/slick from Iyoroi who are makers from Japan.
24mm wide with single hollow.
Length overall - 580mm
Oak handle.
The blades are 120mm long. The back is diamond shaped as opposed to bevel edged.
This is a long paring chisels refered to as a slick and is used for cleaning up joints such as the mortise and tenon joints.
They are not design to be struck with a mallet...
Veritas Small Scraping Plane [Preowned, Unused, SOLD]
Pre-owned but unused.
The Veritas Small Scraping Plane is a great tool for the final smoothing of small, flat surfaces, even highly figured timber, or small areas of difficult grain within a larger surface.
The scraping plane comes into action after the surface has been prepared as well as possible using a finely tuned smoothing plane. What the scraping plane does is to replace the need for sanding...
Clifton No.6 Jack (Fore) Plane [Pre-owned, SOLD]
Pre-owned (circa 2010) but very well looked after.
British racing green painted body which indicates pre-Thomas Flinn takeover of the Clifton name and manufacturing process.
So, this plane has a hand forged 2 3/8” wide blade with 2-piece cap iron (makes sharpening the blade a bit quicker).
This size plane is often overlooked as people opt for the longer No.7 Jointer or a shorter 5 1/2....
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned, SOLD]
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
Toothed blades have small chisel-like teeth .030'' (.762mm) wide and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set smoothing plane ideally purchased through Classic Hand Tools.
The blade comes with a 25° flat ground bevel; it sits in the tool at...
Union No.42 Tongue & Groove Plane [Preowned, SOLD]
A very nice example of the No.42 tongue & groove plane by UNION
This dates from about the 1920's
This Union No.42, which is similar to the Stanley plane, has a fence that you can swing through 180 degrees. One way for the tongue, then swing it around for the groove.
In great order this plane is ready to tongue and to groove.
This is a commission sale.
Pfeil Carving Tools Set of 8 with Roll [Preowned, Unused, SOLD]
Unused, and unusual in that these Swiss made carving tools have attractive stained handles.
This Pfeil 8 piece carving set is a starter set containing 7 full size fully forged tools and one chip carving tool.
The set is supplied in a rugged canvas roll case and the tools are honed and sharpened ready for use.
The tools included are 1/12, 1s/12, 5/12, 4/20, 7/10, 9/4, 12/8 and KERB12.
So...
Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]
A very good crisp example of this plane which is now made by Thomas Flinn Sheffield under the Clifton Planes (Clifton 3110) brand for £245.
Supplied with a well-made fitted case with a sliding lid.
7” overall, 1 1/8” wide blade.
It will be difficult to find this plane elsewhere is such good condition.
Veritas Bullnose Shoulder Plane (with PMV11 blade) [Preowned, Unused, SOLD]
Pre-owned, but unused in original box with instructions.
The plane has a minor tarnish on one side face which we have cleaned.
This is what we say about the plane on our main site where this exact tool is available for £233 inc VAT
''The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll...
Crown Tools Revolution Super Ring
Replacement Super Ring cutter for Revolution Hollowing System.
Lie-Nielsen Toolworks – Screwdriver Holder with bits [Pre-owned, SOLD]
6 Wera bits accompany this Lie Nielsen Multi Tip holder.
G++ - Fine condition.
Boxed (dated 2008).
Little used.
Knew Concept 3CS Fret Saw [Pre-owned, SOLD]
This Knew Concepts saw pre-dates the heavier and more rigidly framed Mk. IV saws. It has the lever tension mechanism, is easy to use due to light weight. It is powder-coated red and is extremely scratch and damage resistant.
The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever...
Clifton Adjustable Low Angle Block Plane [Pre-owned, SOLD]
Pre-owned (or second-hand, if you prefer), this is an adjustable low-angle block plane made in Sheffield, England.
It’s in G++ condition with 95% of the iron remaining and only minor superficial scratches or wear.
Includes the original box.
Cast from high-quality bronze and finished in the signature graphite colour, this plane combines comfort, style, and performance. The walnut handle...
Woodpeckers – Model 641 Woodworking Square [Pre-owned, SOLD]
Woodpeckers - The new benchmark in precision measuring and layout tools.
Easy to read 1mm laser etched increments on both sides of the blade.
Thick shouldered handle so the square rests flat on the workpiece and stands upright.
0.001” tolerance (that is pretty tolerant!)
Custom made holder to hang on your wall (mdf cutout housing).
Original packaging.
In good condition, with a...
Chris Vesper Marking Knife [Pre-owned, SOLD]
Chris Vesper of Australia is one of those makers who gets it right. He just doesn’t compromise on making sure his tools do exactly what they are supposed to, and that usually comes with a hefty price tag as the workmanship in his hand tool is legendary.
When the Aussie dollar strengthened so much, it was simply too expensive for Classic Hand Tools to bring Chris’ tools into the UK (alongside...
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
New, old stock.
With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago.
160mm overall with the high carbon drop forged blade edge measuring 35mm.
The blade profile differs slightly from current Flexcut offerings...
Clifton 400 – Small Shoulder Rebate Plane [Pre-owned, SOLD]
This is the baby of the Clifton planemaking stable.
3/8'' (10mm) blade.
Length of plane 3 1/8'' (80mm)
This is a small rebating plane for fine work, made in Sheffield UK.
The Clifton 400 shoulder rebate plane has a fine mouth for cabinetmakers and woodworkers wanting fine shavings in their precision work.
Adjustment of the cutting iron is done in the traditional manner...
2 Ray Iles Mortise Chisels [Pre-owned, SOLD]
Pre-owned but superbly cared for! So much so that the owner made a handsome box with a sliding lid to house these two beech handled mortise chisels made by Ray Iles of England.
¼” & 3/8” wide. 12” overall.
Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]
Probably unused, in original box this is a pre-owned item in near perfect condition.
This 5 1/2" long side rebate plane was designed for cabinet makers to accurately trim dados, grooves, moulds etc.
This useful plane has two skewed cutters set at a very low angle. The cutters are set in the plane with their bevel edges facing upwards. Keep these cutters sharp to get the best results.
Full...
Veritas - Richard Wile Plane Hammer [Pre-owned, SOLD]
This is the description from our main site:
“Making fine adjustments to plane-blade position is easier with the right tool, and few can compare to the finely made plane hammers of Richard Wile, a hobbyist woodworker from Nova Scotia.
Based on Wile's design, this hammer is machined in our shop to have the same elegant proportions as the original, giving it a weight and balance that feel...
Panel Raising Plane [Vintage, SOLD]
A beech bodied panel raising plane with good 2 ¼'' skew iron by Greaves.
The plane does not have a maker’s name but is well made and is in very good order.
8 ½'' long.
Pair of No.12 Hollow & Round by John Moseley & Son [Vintage, SOLD]
A nice pair!
Hollows and rounds were made in matched pairs, thin ones marked No1 and widest ones generally stopped at No.18 (yes, we have seen a No.20 matched pair but that is rare)
No.12's have cutters that are 3/4" wide.
Wedges and irons in very good order.
John Moseley was making planes in Broad Street from 1862-1894 (Source : Goodman, British Planemakers from 1700)
There...
Starrett 150mm Dividers [Pre-owned, SOLD]
In excellent condition
Little used
In the original Starrett box
Starrett code 277–6
Veritas Dual Marking Gauge with shaft clamp [Pre-owned, SOLD]
In fine working order with crisp marking cutters, this marking gauge would pass “as new”.
It is pre-owned and has been used a little.
The Veritas Dual Marking Gauge has two independently adjustable rods, which will allow you to set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions. Projection up to 5-3/4" is...