Best Selling

Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]

Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]

Boxwood handle - unused. In fact whilst it looks like a chisel it is best described as a plane (kanna). These work by drawing the edge towards you. They are also described as a Japanese skew chisel that tapers to a point from 18mm. The length of the blade is 60mm with an overall length of 210mm Japanese Yari Kanna are unusual tools, descended from ancient Korean and Japanese bent chisels used...

£65.00 (VAT exempt)

Lie Nielsen Toolworks – Replacement blade for a No.2 Plane [Clearance, As New]

Lie Nielsen Toolworks – Replacement blade for a No.2 Plane [Clearance, As New]

Original rust proof packaging – as new. 1 5/8” wide. This is for a Lie-Nielsen No.2 smoothing plane.

£54.00 inc VAT

W.Marples & Sons 2” wide bevel edge chisel [Vintage, SOLD]

W.Marples & Sons 2” wide bevel edge chisel [Vintage, SOLD]

12 1/2” overall this is a lovely chisel that has a hefty hardwood handle. There is over 4“ of blade left to wear out (good luck with that!) In very good condition, no pitting, good clean edge. Small split to brass ferrule but the ferrule will hold.

£38.00 inc VAT

Gyokucho Blades for Cast Gardening Saw - Curved

Works with the following Gyokucho Cast 200 saws.............. 5123 Cast 200 Medium Teeth 5223 Cast 200 Fine Teeth 5323 Cast 200 Large (Coarse) Teeth 5523 Cast Gardening 200 Medium Teeth 5623 Cast Gardening 200 Large (Coarse) Teeth 5723 Cast Gardening 200 Curve

£17.50 inc VAT

Lie Nielsen Toolworks – Replacement blade for a No.9 Mitre Plane [Clearance, As New]

Lie Nielsen Toolworks – Replacement blade for a No.9 Mitre Plane [Clearance, As New]

Original rust proof packaging – as new. Lie-Nielsen Toolworks blade for a No.9 Mitre Plane

£85.00 inc VAT

Lie-Nielsen No.9 - Mitre Plane [Preowned, SOLD]

Lie-Nielsen No.9 - Mitre Plane [Preowned, SOLD]

Pre-owned and used. A commission sale. Complete with Hot Dog handle (which currently retails north of £90) This discontinued beauty has marks of use. The sole is 90-95% free of any marks as is the side face where the hot dog is currently sitting. The other face has all the scrach and discolouration marks affecting maybe 10-15% of the face. So if you are lookig for pristine, look eleswehere....

£495.00 (VAT exempt)

Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New, SOLD]

Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New, SOLD]

Unused, as new. White paper tool steel and high carbon steel laminated blade with red oak handle and steel striking hoop. 240mm overall. 60mm blade. White paper steel (Shirogami in Japanese) is a carbon tool steel that is ideally suited to the production of chisels. It exhibits superior durability when compared to alloyed blue paper steels. Widely available in the UK for about £70...

£53.00 (VAT exempt)

Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]

Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]

This is in very good order with original Stanley iron. The sole moves adjust freely. There is a small indent at one edge of the sole (very small indeed but we do try to be very accurate in our descriptions). This indent (1mm) is outside the edge of the planning track and we do not think this would affect performance.

£125.00 inc VAT

1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]

1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]

As good as you’ll get if you want an old-style oval handles mortise chisel. This bad boy hasn’t done any work we think.

£30.00 inc VAT

Oscar Rush Slick

These hand forged timber framing slicks with leather guards are made here in Suffolk by Oscar Rush. Width of 60mm or 2 3/8'' with offset sockets and long turned ash handles - they are real beauties! Please note each of these tools are forged, ground and handled by hand which makes each of these beautifully functional edge tools unique. There will be slight variations between each...

£295.00 inc VAT

Replacement Blade for Clifton No. 400 Shoulder Plane

A replacement blade for the Clifton 400 Shoulder Rebate Plane. Adjustment of the cutting iron is done in the traditional manner by tapping the end of the cutting iron and locking the Rosewood wedge in place. Cutter: 7/16" (11mm) wide Made in Sheffield, UK

£23.00 inc VAT

Silky Ibuki Saw - Replacement Blade

The replacement blade for the Ibuki Saw - a well blanced curved saw with long blade for large pruning work. An alternative to Heavy Chain Saws A true professional heavy duty curved saw with blade length 390mm, 6.5 teeth/30mm .Most suitable for pruning large branches at lower and higher position. A large and comfortable rubber hand-grip gives strength and flexibility to the full length of...

£68.00 inc VAT

Small Cheek Float - Push

Dan Schwank of Red Rose Reproductions contacted Thomas Lie-Nielsen about making their range of discontinued floats. Lie-Nielsen had no plans to re-introduce them so they were supportive in helping Dan getting these back to market. They certainly match the build quality of the original floats by Lie-Nielsen. The Red Rose Reproductions floats come in a variety of sizes for specific uses. Primarily...

£93.00 inc VAT

Kirschen 6 Chisel Set (2 Cherries Brand) [Preowned, SOLD]

A boxed set of six chisels in a wooden presentation case by Kirschen, Germany. 6 little used "2 Cherries Brand" chisels with graduated beech handles (the wider the chisel the bigger the handle). 6, 10, 12, 16, 20 & 26mm wide blades, shaped handle and fitted with a steel ferrule. Polished blades made from high carbon steel. Pre-owned. Little used. Available new elsewhere in the UK for about...

£95.00 (VAT exempt)

Record 071 Router Plane [Pre-owned, SOLD]

Record 071 Router Plane [Pre-owned, SOLD]

Complete with 3 cutters, depth stop and fence.

£105.00 inc VAT

Gyokucho Fugaku Edauchi Gardening Saw with 300mm curved blade

Gyokucho Fugaku Edauchi Gardening Saw with 300mm curved blade

This saw has a taper ground blade with no set; this reduces the amount of friction and helps prevent binding which reduces the amount of effort required for each pull stroke. Perhaps more importantly, the clean cut will help the tree regenerate quicker. Comes with a useful sheath/guard which can be hung from a belt.

£49.00 inc VAT

Henry Taylor Woodcarving Punch - Double Diamond

Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.

£9.60 inc VAT

Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]

Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]

You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket. This is so others may not be blocked from purchasing should you decide not to proceed.

£325.00 inc VAT

Stanley No.50 Combination Plane [Preowned, Unused, SOLD]

Stanley No.50 Combination Plane [Preowned, Unused, SOLD]

It is quite easy to find this plane on reselling sites like Ebay etc. However, unlike many of the examples on those sites, this Stanley No.50 Combination plane is in unused, "as new" condition, in its original box (this has been drawn on in felt tip pen), with instruction leaflet, with the 17 cutters in the wooden cutter holder, has both spurs and the nickel plating is 95+ untarnished. 9 plough/dado...

£135.00 (VAT exempt)

Veritas Modified Skate Small Plough Plane

From 1 March 2016, Veritas Small Plough Planes will have a modified skate profile allowing the use of beading blades (all three sizes). The skate on the new version of the plane is much narrower than the original. For anyone wishing to use an older model with the beading cutters, the narrower skate is available to retrofit to the existing plane.

£84.50 inc VAT

Crown Tools Revolution Brass Clamp Kit

Crown Tools Revolution Brass Clamp Kit includes Extender and two Long Hollower (REV16) blades.

£33.60 inc VAT

Gyokucho 662 Ryoba Fine 240mm + Spare Blade

The Gyokucho 662 Ryoba Fine 240mm TPE (rubber) handle with a spare blade.

£40.95 inc VAT

view bundle

Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]

Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]

You may only have 30 minutes to complete your purchase after you have entered this item into your basket. This is so others may not be blocked from purchasing should you decide not to proceed.

£480.00 inc VAT

6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]

6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]

These are boxwood handled chisels have overall lengths between 330mm and 400mm Pre-owned but these have seen little use. Commission sale. 1/4'', 3/8'', 5/8'', 3/4'', 1'' & 1 1/4''

£180.00 (VAT exempt)

6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]

6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]

Attractive French Walnut handles for chisels, rasps etc. 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.

£35.00 inc VAT

Stanley 79 Double-sided Rebate Plane [Pre-owned]

Stanley 79 Double-sided Rebate Plane [Pre-owned]

In superb condition. This also has an owner made bespoke wooden base to keep it safely housed. The best example of thus plane we have seen.

£75.00 inc VAT

Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]

Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]

2 3/8" wide Rob Cosman IBC plane & cap iron Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while the sides are precision-ground square to the bevel and hand-polished for optimal performance. Unused but...

£65.00 inc VAT

Saburrtooth 6mm Rotosaw - 3/4' x 1/4

15% discount from price shown.

£19.80 inc VAT

view options

Crown Tools Revolution Heart Cutter

Crown Tools Revolution Heart Cutter available in large and small.

from £18.25 inc VAT

view options

Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]

Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]

This is a rare beast. This example has been professionally re-nickel plated and 4 new blades have been made to complete the plane. This plane was designed for the precision planing of dovetail joints. The STANLEY 444 Dovetail plane was manufactured between 1912 and 1938 so it is very rare to find something so old in mint condition as the nickel plating always deteriorates over time if the...

£750.00 (VAT exempt)

Crown Tools Revolution Indexing Tool

Crown Tools Revolution Indexing Tool is used with the Texturing Tool.

£28.75 inc VAT

Record No.50 Combination Plane [Preowned, Unused, SOLD]

Record No.50 Combination Plane [Preowned, Unused, SOLD]

This is in super unused condition with the instruction booklet. The box is a bit tatty with a torn lid but the plane is in fine condition with all the bits n pieces, cutters etc all present and very correct. Pre-owned, commission sale.

£150.00 (VAT exempt)

Elwell Hand Hatchet – 1 1/2 lbs head [Pre-owned]

Elwell Hand Hatchet – 1 1/2 lbs head [Pre-owned]

An Elwell British Classic!

£45.00 inc VAT

IYOROI Japanese Chisels (with Boxwood Handles) - Set of 10 [Preowned, Unused, SOLD]

IYOROI Japanese Chisels (with Boxwood Handles) - Set of 10 [Preowned, Unused, SOLD]

Still in their original box and wrapping, this set comprises of 10 chisels from the brand IYOROI. 223mm in overall length. Sizes are as follows.. 3, 6, 9, 12,15,18, 24, 30, 36 & 42mm. Hollow ground back with single flutes for widths 3mm, 6mm & 9mm. Double flutes for 12mm, 15mm & 18mm & triple Flutes for 24mm, 30mm, 36mm and 42mm This is a commission sale from one of our...

£360.00 (VAT exempt)

Lamello Minispot G2a [Clearance, As New, SOLD]

Lamello Minispot G2a [Clearance, As New, SOLD]

G2A is the Minispot grooving machine for cutting out knots, resin pockets or damaged areas with patch size 2. The movable cover allows the groove to be cut very close to the rabbet edge, without the material thickness of the base plate coming into play. The transparent rear cover enables accurate positioning of the G2A over the relevant area, thus ensuring a perfect repair. We are not sure...

£245.00 inc VAT

2 Iyoroi Japanese Slick Chisels [Preowned, Unused, SOLD]

2 Iyoroi Japanese Slick Chisels [Preowned, Unused, SOLD]

Unused paring chisels/slicks from Iyoroi who are makers from Japan. Widths are 36mm & 42mm All with single hollows. Length overall of 580mm Red Oak handles. The blades are 120mm long. Bevel edged. These are long paring chisels refered to as slicks and are used for cleaning up joints such as the mortise and tenon joints. They are not design to be struck with a mallet or hammer. A...

£215.00 (VAT exempt)

Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]

Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]

Lamello Top 20 S2 Biscuit Jointer - New Old stock The Top 20S is considered superior to standard biscuit jointers for precision work, especially when using its adjustable height stop for parallel alignment. We have had this in our stock room for at least a decade. It has been quietly sitting in its original box, doing absolutely nothing at all. The winter months clean continues at Classic...

£395.00 inc VAT

Rabone Chesterman Engineers Spirit Level on hardwood base [Vintage]

Rabone Chesterman Engineers Spirit Level on hardwood base [Vintage]

12 “ long by 1 ½” wide by 2 ½”high (without the wooden base) this all metal engineers’ level is an impressive ornament for your desk if nothing else. Its main horizontal vial has a brass cover that rotates to protect the bubble which is in perfect working order. The brass cover elevates this level somewhat in terms of its attractiveness. The small lateral...

£66.00 inc VAT

Edward Preston Bullnose Plane [Pre-owned]

Edward Preston Bullnose Plane [Pre-owned]

Edward Preston Bullnose Rebate Plane Manufactured:From 1933 to 1994 Length:4 inches Weight:1-1/4 pounds Cutter Width:1-1/8 inches Construction:Cast iron body. Tungsten steel cutter This has the detachable front piece which means you can convert this to a chisel plane if required. Original good iron with plenty of life left (5/8”) Good square mouth.

£54.00 inc VAT

Iyoroi Japanese Diamond Backed Paring Chisel/Slick (24mm) [Preowned, Unused, SOLD]

Iyoroi Japanese Diamond Backed Paring Chisel/Slick (24mm) [Preowned, Unused, SOLD]

Unused paring chisel/slick from Iyoroi who are makers from Japan. 24mm wide with single hollow. Length overall - 580mm Oak handle. The blades are 120mm long. The back is diamond shaped as opposed to bevel edged. This is a long paring chisels refered to as a slick and is used for cleaning up joints such as the mortise and tenon joints. They are not design to be struck with a mallet...

£100.00 (VAT exempt)

Union No.42 Tongue & Groove Plane [Preowned, SOLD]

Union No.42 Tongue & Groove Plane [Preowned, SOLD]

A very nice example of the No.42 tongue & groove plane by UNION This dates from about the 1920's This Union No.42, which is similar to the Stanley plane, has a fence that you can swing through 180 degrees. One way for the tongue, then swing it around for the groove. In great order this plane is ready to tongue and to groove. This is a commission sale.

£130.00 (VAT exempt)

Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]

Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]

This clever and very well-made marking gauge is made by JessEm Tool Company in Canada and normally retails for about £135. The Model number is 08803. The Wood Sabre Metric Marking Gauge from The JessEm Tool Company is machined out of high-quality stainless steel, 6061 aluminium and anodised for durability. The design allows the user to dial in their scribe line from 0 up to 150mm. The bevelled...

£75.00 inc VAT

Crown Tools Revolution Super Ring

Replacement Super Ring cutter for Revolution Hollowing System.

£26.50 inc VAT

Crown Tools Revolution Swan Neck and Egg Scraper

A 12'' Swan Neck for use with Revolution Hollowing Sytem supplied with Egg Scraper (REV13), 1/2'' diamter shaft.

£45.50 inc VAT

36” Straight Rule [Rare, Vintage]

Made from beech with brass edges and ends, this is a lovely rule with clear markings on the upper face which has one bevelled edge. 36” long, ½” thick and 2 ¼” deep. So this is a heavy rule which was desirable so it didn't slide about. The person who owned it told Classic Hand Tools that is was used in aTailors shop. This is perfectly believable but it...

£48.00 inc VAT

Record 050 Combination Plane [Pre-owned, As New, SOLD]

Record 050 Combination Plane [Pre-owned, As New, SOLD]

Never used. All in 90-100% as new condition (just the long bars are a little scruffy). Original tatty box but pretty much everything else including all the 18 cutters are in unused, untarnished condition. Instruction booklet.

£125.00 inc VAT

Henry Taylor Sheffield Fishtail Carving Gouges – Series 11 – 5 widths [New, Clearance]

Clearance stock, From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Professional grade Sheffield made fishtail gouges series 11 – which is a tight curve. These...

£120.00 inc VAT