Sort By
Per Page
View
Grid
List
Linocut and Reduction Printmaking
by Laura Boswell
A beautiful hardback book revealing the astonishing flexibility and creative possibilities of the linocut printmaking technique.
Written by a leading and innovative linocut printmaker, it focuses on the reduction printing technique and gives detailed, practical help to choosing and using tools and materials, plus generous creative advice on designing specifically for linocut....
Robert Sorby Deluxe Revolving Centre System
The Robert Sorby Deluxe Revolving Centre System is a versatile woodturning tool set that includes six different accessories: a deluxe revolving centre, ring centre, hollow centre, location pin, 60-degree point, mini 60-degree point, and cup centre. Designed to accommodate various tasks, this set ensures smooth and precise operation for woodturners. Available in both 1 MT and 2 MT, it also comes with...
Robert Sorby Side & End Swivel Tip
The Robert Sorby Side End Swivel Tip is designed to create parallel sides on boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Related Products:...
Dovetail Cutter for Gifkins A Series
The TGAD 12 1/4' is the A10 dovetail cutter and mate to the straight cutter. The A10 dovetail cutter and the A10 straight cutter are designed specifically for the A10 Template.
Note: All Gifkins Dovetail cutters are designed for use in a table mounted router, and should not be used in a hand held router.
Gyokucho Blade for Razorsaw ZA 240mm (306 & 307)
Replacement for the Gyokucho #306 and 307 saws
Veritas Hinge Mortice Plane
The Veritas Hinge Mortice plane can accurately cut the recesses for door hinges or strike plates in a fraction of the time it takes to set up a router or chop them out with a chisel. The precision blade depth adjuster ensures an accurate, uniform depth. The ductile cast iron body has been accurately machined and ground flat. The large wooden knobs are positioned to provide comfort and excellent control....
Straight Cutter for Gifkins A Series
The TGAS 12 1/4' is the A10 straight cutter and mate to the dovetail cutter. The A10 dovetail cutter and the A10 straight cutter are designed specifically for the A10 Template.
Note: All Gifkins Dovetail cutters are designed for use in a table mounted router, and should not be used in a hand held router.
.png "Last Ones!")
Veritas Jointer Blade Sharpener
A commercial sharpening service or a sophisticated home grinder is necessary for badly nicked blades. The Veritas Jointer Blade Sharpener is designed to restore blades dulled from normal use, even if they contain minor nicks.
It clamps blades up to 8" wide (including hand-plane blades) for sharpening on PSA-backed abrasives. Just stick the abrasive to a flat surface (plate glass works well),...
Breeze - Greetings Card
Breeze is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Robert Sorby 1/4'' & 1/2'' Cove Cutting Tip
The Robert Sorby Cove Cutting Tip is one of five additional cutters available for the popular Robert Sorbyn Multi-tip Hollowing Tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
This cutter is designed for use with the following tools:
Multi-tip...
Saburrtooth 6mm Cylinder - 1/4'' x 1''
15% discount from price shown.
Bucket & Spade - Greetings Card
Bucket & Spade is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Sharpening - A Woodworker's Guide
by Randall A. Maxey
Sharpening - A Woodworker's Guide is aimed at both those new to woodworking as well as the experienced woodworker, is broken down into three main sections: sharpening by hand, machine sharpening and putting the theory into practice. Traditional sharpening techniques and tools are covered as well as those using the latest innovations for both hand and machine sharpening.
Areas...
Lie-Nielsen No.3 Bronze Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or an iron casting. They all come with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth...
Pfeil Triangular Burnisher
Pfeil Triangular Burnisher has a triangular section mirror polished steel bar, 160mm long with cherry handle.
Robert Sorby Pigtail Mandrel
The Pigtail Mandrel to fit the ProEdge Sharpening Machine.
Also part of the Buffing Kit (PEBUFFKIT)
Zebra Wood
Zebra Wood - Woodturning Blanks.
Kiln dried.
This will give you all the information you need before deciding whether this wood is to your liking for turning.
Our stock is flat sawn (not quarter sawn) with one planed face.
Earth, Sea, Sky - Greetings Card
Earth, Sea, Sky is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Gyokucho 375 Dozuki 240mm Rip + Spare Blade
Gyokucho 375 Dozuki 240mm Rip TPE (rubber) handle with a spare blade.
Gyokucho 400 Kataba Proton Power Saw 240mm + Spare Blade
The Gyokucho 400 Kataba Proton Power Saw 240mm with a spare blade.
Gyokucho 661 Ryoba 240mm + Spare Blade
The Gyokucho 661 Ryoba 240mm TPE (rubber) handle with a spare blade.
Henry Taylor Woodcarving Punch - Heart
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Saburrtooth 6mm Rotosaw - 1'' x 1/4''
15% discount from price shown.
Rob Cosman's Wood-Hinge Individual Jigs
What Rob says
Master craftsman Dale Nish taught me how to make an amazing wood hinge for boxes. A wooden dowel is cut into segments, a shallow hole is drilled in the centre of each dowel and a small pin is inserted into the hole for the dowel segments to pivot on. I've made thousands of boxes using this style of hinge and I have designed four jigs to precisely drill the hole in the centre of...
Moon Rising - Greetings Card
Moon Rising is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
15cm x 15cm
Spare Blade for Lie-Nielsen No. 49 Small Tongue & Groove Plane
For use in Lie-Nielsen No. 49 Tongue & Groove Plane. Centres on 1/2" stock, leaving a .166" wide tongue and .230" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Woodpeckers Rule Stop 2
Woodpeckers Rule Stop-2.
Simply take any ruler and add this well engineered stop stop to help you repeat your accurate marking out.
Henry Taylor Woodcarving Punch - Flower 3
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Rounded Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Woodpeckers Woodworking Rule Protractor Head - Metric
Woodpeckers Woodworking Rule Protractor Head - Metric. Includes wall Rack-It wall mount.
Woodpeckers Woodworking Rules have earned a reputation for accuracy, convenience and ease-of-use. Now you can add ''versatility'' to that list of features. The newest addition to the Woodpeckers product line converts any Woodpeckers Woodworking Rule (except the 150mm) into an adjustable T-Square...
Henry Taylor Woodcarving Punch - Open Rounded Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Blade for the Veritas Small Scraping Plane
Replacement blade for the Veritas Small Scraping Plane 05P2950.
Carving the Pineapple with Mary May
In this DVD, Mary May demonstrates how to carve the pineapple, a traditional symbol of hospitality and welcome. She will teach you how to transfer the design to your wood piece, secure it to a backer board, which tools to use, and then show you how to carve the pineapple from start to finish.
Mary May is a professional woodcarver in Charleston, SC, who specializes in decorative carvings for architecture...
Crucible Centre Square
The steel centre square from Crucible Tool.
3-1/4'' (82mm) long x 1-5/8'' (16mm) wide x almost 3/8'' (9.5mm) thick overall. The working area of the blade is 2-7/16'' (62mm) long and includes a 1/8'' (3mm) hang hole. It is ideal for chairmakers or turners who need to mark the centers of spindles or sticks for turning or shaving.
Using the tool is simple....
Gifkins A10 Dovetail Jig
The A10 Gifkins Box Maker's Dovetail Jig. This dovetail template cuts a medium-sized dovetail joint. It’s our most popular template because it offers you—the box maker—a versatile timber thickness range: 5mm to 13mm. The A10 cutters have 1/4-inch cutters. Use thinner timber for delicate boxes and fine insert trays. Use thicker timbers for large jewellery boxes, drawers, file trays,...
Hock High Carbon 8'' Slicing/Carving Knife Kit
Ron Hock kit to create a Slicing/Carving Knife with 8" blade, 1/8" thick - sold without handles and include 3 steel pins.
General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is O1 tool...
Lie-Nielsen Drawbore Pins
Drawboring is a great way to make a strong mechanical joint. A wooden pin is hammered through slightly offset holes in the two pieces, and pulls the joint together. You use Drawbore Pins to pull the joint together first (with some force and a twisting motion). This eases the edges of the hole, making driving the wood pin easier. You can also disassemble the joint if you want to work on the fit some...
Pax Jewellers Saw
The Pax Jewellers Saw has a very thin alloy steel blade and is made for the highest precision work.
The saw has a brightly polished brass back and a Walnut handle. 20tpi as standard. Blade length 6". Individually blister packed.
Resin Infused Wood Blanks
These resin infused blanks are high-quality wooden blanks that have been pressure impregnated with coloured resin. This gives the blank enhanced stability and strength as well as adding an attractive colour.
These blanks, available in stunning finishes like Curly Maple and Poplar Burr (Mappa Burr), are ideal for various projects, including making knife handles, mallet heads, chisel handles or for...
Rob Cosman Bench Crosscut Saw
Every hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. Rob has designed and manufactured two different professional crosscut saws; his Joinery Crosscut and Bench Crosscut to meet this requirement.
Both of Robs crosscut saws are specialized for crosscutting applications. The Bench Crosscut Saw is designed for general crosscutting while his Joinery Crosscut...
Robert Sorby Detail Point Tool - 822H
This is a 3/8" round shaft with a 3 facet point. Ideal for for fine detailing on bowl and spindle work.
Rotur Keyed Chuck and Mandrel
Keyed Chuck & Mandrel Set
Saburrtooth 1/4'' Cylinder - 1'' x 1''
Head Diameter: 1''
Head Length: 1''
Saburrtooth 1/4'' Rotosaw - 1 1/4'' x 1/4''
Head Diameter: 1¼"
Head Length: 1/4"
Spare Blade for Lie-Nielsen No.85 Cabinet Maker's Scraping Plane
Replacement blade for the Lie-Nielsen No. 85 Cabinet Maker's Scraper. A2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take...
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
Veritas Small Plough Plane - Left Handed
This is the Left Handed Version.
