Sort By
Per Page
View
Grid
List
Fisch Extension to Elite Black Auger Bit
Extensions for the Fisch Elite Black Auger Bits available in 2 diameters, 20mm and 26mm
Gloforce Sucker Cup Stand
The Gloforce suction cup with 1/4" UNC thread to attach to Eye-Light. This suction cup will attach the floodlight to a window or non-porous surface and can angle the light in any direction using the ball joint and moveable arm.
* Extra Strong Suction
* Rotational Arm
* Hold and Release Lever
Hock Shoulder Plane Kit
The Shoulder Plane Kit is precision-made from beech and jatoba for beauty, performance and durability. This easy-to-assemble kit requires a only drill (for the locator dowels), some glue and clamps, and some fine tuning and shaping to complete. The bevel-down blade is bedded at 37.5° for low-angle end-grain planing of shoulders. 3/4" Tee Blade (#SH075) is included.
Robert Sorby Midi Multi-Tip Hollowing Tool
All the benefits and attributes of the full size Robert Sorby Multi-tipped Hollowing tool (RS-200KT) but 2/3 the size, giving access through a much smaller aperture when turning fine hollow forms.
1/2" flat surface allows for aggressive hollowing and the swivel clamp allows under cutting.
This tool comes with a full set of instructions and three cutters (RS-222, RS-111C and RS-112C).
Flexcut Pro Series 2 Pack of Knives with Small/Slim Handle FP100
This set of two knives delivers the Flexcut Pro experience for users who prefer a smaller and slimmer handle.
The small/slim handle is approximately 20% slimmer and slightly shorter than the full sized handle.
Note - These Small/Slim handle knives are not sold separately.
1 3/8'' Detail Knife
1'' Chip Carving Knife
Gyokucho Blade for Fugaku Folding Dozuki 240mmm Rip (111)
Replacement for the Gyokucho #111 saw
Robert Sorby Diamond/Side Cut Scraper
The Robert Sorby diamond/side cut scraper can be used on square bottomed boxes the end profiles allows the tool to create a right angled juncture between side wall and bottom. The 85º angle at the end prevents the tool from cutting th eside wall and the bottom at the same time.
3/4" Diamond/Side Cut Scraper - 16" with handle.
Auriou Stone Rifflers - Half Round / Triangular
Enhance your stone carving projects with the Auriou Stone Rifflers, designed with half-round and triangular profiles for versatile sculpting. Hand-stitched with a comfortable "fat" hexagonal barrel handle, these rifflers allow extended use without discomfort. Crafted with a coarser cut specifically for soft stone and marble, they offer precision and durability.
Lengths Available: 150mm,...
Auriou Riffler Rasp Set of 6 - 150mm
All six double ended rifflers giving you 12 precision shaping heads. 150mm (6") Grain 14.
Set includes:
Knife / Spoon
Rhombus / Brush
V Shape / Rectangle
Thumb / Laurel
Rat Tail / Oval
Half Round / Triangular
Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).
Robert Sorby Deluxe Revolving Centre System
The Robert Sorby Deluxe Revolving Centre System is a versatile woodturning tool set that includes six different accessories: a deluxe revolving centre, ring centre, hollow centre, location pin, 60-degree point, mini 60-degree point, and cup centre. Designed to accommodate various tasks, this set ensures smooth and precise operation for woodturners. Available in both 1 MT and 2 MT, it also comes with...
Robert Sorby Fingernail Profiling Kit
The fingernail profiling kit is ideal for shaping those perfect fingernail sweeps on bowl and spindle gouges.
This set contains the arm and the boss but both items are available individually.
Dovetail Cutter for Gifkins A Series
The TGAD 12 1/4" is the A10 dovetail cutter and mate to the straight cutter. The A10 dovetail cutter and the A10 straight cutter are designed specifically for the A10 Template.
Note: All Gifkins Dovetail cutters are designed for use in a table mounted router, and should not be used in a hand held router.
Veritas Hinge Mortice Plane
The Veritas Hinge Mortice plane can accurately cut the recesses for door hinges or strike plates in a fraction of the time it takes to set up a router or chop them out with a chisel. The precision blade depth adjuster ensures an accurate, uniform depth. The ductile cast iron body has been accurately machined and ground flat. The large wooden knobs are positioned to provide comfort and excellent control....
Kirjes Extendor
Makes the Dust Extractor handle even more effective.
The Kirjes Dust Extendor is fitted onto the front end of the Kirjes Dust Extractor Handle and eliminates hazardous dust up to 98% when sanding on top of the Kirjes Bowl/Dome Sander or using a Velcro Sponge Pad.
The Extendor is easily adjustable by hand or thumb whilst sanding work is in progress and gives you the freedom of choice where to...
Straight Cutter for Gifkins A Series
The TGAS 12 1/4" is the A10 straight cutter and mate to the dovetail cutter. The A10 dovetail cutter and the A10 straight cutter are designed specifically for the A10 Template.
Note: All Gifkins Dovetail cutters are designed for use in a table mounted router, and should not be used in a hand held router.
Kutzall 3 Piece Very Coarse 1/4'' Burr Kit
Kutzall burrs are the perfect companions for your rotary carving tools.
Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.
Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.
NOTE: These burrs should only...
Morinomi Japanese Chisel
Used for cleaning the bottom of mortices.
Flexcut No.9 Sweep Gouges
The Flexcut No.9 Sweep Gouges are interchangeable blades with a steep curved cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
1mm (micro) SK800
1.5mm (micro) SK801
9/16" (14mm) SK703
...
Fisherman & Geese - Greetings Card
Fisherman & Geese is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Spare Blade for Lie-Nielsen No. 073 Large Shoulder Plane
Replacement blade for Lie-Nielsen No. 073 Large Shoulder Plane.
Comes with a 25° flat ground bevel.
* 1 1/4" wide x .140" thick
* A2 cryogenically treated Tool Steel
Woodpeckers Mini Square
Woodpeckers Mini Square
A very handy small square. Description from the Woodpeckers website........
''You can use any square for checking a chisel, but they're usually too long to clear the handle, not wide enough to make it easy to align to the edge and generally poorly designed for the job. That's why we came up with the Woodpecker Mini Square. At 1-1/8'' (28.5mm) x2,...
Arbortech Mini Carver 54mm (2'') Diamond Blade
To be used with the Arbortech Mini Carver, these diamond discs make the Mini Carver even more versatile. The extension arm makes it ideal for reaching tighter spots that a normal size grinder miight struggle. Suitable for small scale projects and will cut the likes of marble, concrete, grout joints, epoxy, cement, and fibreglass.
Available in two different thicknesses (1.2mm or 1.5mm). 54mm in diameter.
Toothed Blade for the Lie-Nielsen 101 Violin Makers Plane
Toothed blade for our No. 101 Violin Maker's Block Plane. Comes with a 25° flat ground bevel.
7/8'' wide x 1/8'' thick
A2 cryogenically treated Tool Steel
Please Note: Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your toothed blade...
Gyokucho 661 Ryoba 240mm + Spare Blade
The Gyokucho 661 Ryoba 240mm TPE (rubber) handle with a spare blade.
Flexcut Mini-Detail Skew Knife KN31
The Flexcut Mini Detail Skew knife is excellent for fine eye detail and feathers when decoy carving.
Small 9.5mm straight blade, the extended shank helps for a deeper reach of the blade.
Woodpeckers Stainless Steel Squares
Woodpeckers Stainless Steel Precision Woodworking Squares with Rack-It
These squares feature the same one piece precision machines central core found in all Woodpeckers fixed blade squares. Some of the highlights.......
Metric graduations
One piece central core
Cheeks are narrower than core to give a shoulder to give stability when laying out
Mark parallel to an edge by dropping a pencil...
Gyokucho 616 Ryoba 300mm + Spare Blade
The Gyokucho 616 Ryoba 300mm with a spare blade.
Flexcut Upsweep Knife KN28
The Flexcut upsweep knife is designed for incising and carving detailed designs. A versatile knife, the curved blade makes it easier for both carving and shaving type cuts.
Henry Taylor Woodcarving Punch - Flower 3
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Star
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Brusso Jig TJ-702
Compatible with Brusso HD-702
Chippendale Chairs with Jeff Miller
This Chippendale-style Chair has a classic yet simple elegance that fits in well with a wide range of other styles. It's a project you'll want to show off, and building one will greatly increase your capabilities as a woodworker. Carefully worked out methods make this chair an accessible — but still challenging – hand tool project.
Jeff Miller is a furniture designer, craftsman, teacher, and...
Floral Relief Carving with Mary May - 2 Disc
Learn to carve two deep relief carving projects: a lily and a rose. Each present interesting challenges such as overlapping petals and leaves. Mary also explains the different types of relief carving, shows you the tools to use, and how to attach the carvings to a temporary backer board to safely hold your piece as you work on it.
Mary May is a professional woodcarver in Charleston, SC, who specializes...
Fundamentals of Inlay: Paterae, Part I
by Steve Latta
Paterae has a rich and diverse tradition in the Federal Style of American furniture design. These oval-shaped ornaments were often used to give decorative flair to the upper portion, or pilaster, of Federal table legs. In this fourth DVD with inlay master, Steve Latta, we explore the tools, materials, and techniques to create eight specific Paterae designs.
141 minutes, DVD....
Gyokucho Compact Set of 2 (Atsuba & Jushi)
The compact Kataba Atsuba (#293) which is crosscut capable of starting cuts in the middle of a board, and the Jushi (#295) which is ideal for rip cuts when dovetailing.
Hamlet Thread Chasers 18 tpi HSS (pair of)
Thread chasers by Hamlet Craft Tools in Sheffield, England.
These are tools used for chasing (this basically means cutting) a thread on your workpiece on your lathe and are made in matched pairs. One of the pair (the male or external thread) has its cutting 'teeth' at the end of the blade and is used for threading the outside of the workpiece, whilst the "female" has cutting teeth set at right...
Hock Block Plane Kit
Here Ron Hock offers a small version of their ever-popular Krenov-style wooden plane kit. This handy Block Plane comes with a 1" wide blade, ends up 5¾" long and trims down to 5" or less depending on your needs. Jatoba body.
![Karl Holtey 982 Smoothing Plane [Preowned, SOLD]](/images/products/small/3979_10257.jpg "Karl Holtey 982 Smoothing Plane [Preowned, SOLD]")
![Karl Holtey 982 Smoothing Plane [Preowned, SOLD]](/images/products/small/3979_10256.jpg "Karl Holtey 982 Smoothing Plane [Preowned, SOLD]")
Karl Holtey 982 Smoothing Plane [Preowned, SOLD]
The best description of this plane is from Karl Holtey's website. Karl has long been recognised as a planemaker who has always sought perfection in his work. He is regarded by many as one of the best, if not the best modern day planemaker.
The 982 was made in the early years of the last decade. This example has seen very little use and has minor superficial scratch marks on the sole consistent...
Left Handed Auriou Cranked Neck Curved Ironing Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE.
The Left-Handed Auriou Cranked Neck Curved Ironing Rasps are precision tools ideal for working in small, tight areas. The cranked tang provides knuckle clearance, and the curved shape allows easy access to your workpiece. Available in various widths (10mm, 15mm, 20mm, 25mm, and 30mm) and grains, they offer control and...
Rotur 1'' x 4 Prong Drive Centre
The Rotur 1" x 4-Prong Drive Centre is a high-quality tool designed for secure and stable spindle work on your lathe. Its integral points ensure a firm grip, preventing slippage, and it's easily removable with a knockout bar. The drive center is ideal for squared spindle ends, offering reliable performance in various woodturning tasks. Available in 1 MT and 2 MT sizes, it fits most standard...
Rotur Deluxe Rotating Centre
The Rotur Deluxe Rotating Centre features a unique design where the main body remains stationary while a small point turns, providing precise support for detailed woodturning tasks. With a slim 12mm diameter nose and a 60-degree point, it’s ideal for intricate work as well as general spindle turning. The center is equipped with a triple bearing system, including a thrust race, ensuring smooth...
Rotur Drills for Pen Turning
Rotur tin coated twist drill bits for pen turning.
Two sets available:
6.8mm, 6.9mm, and 7mm
9.8mm, 9.9mm, and 10mm
Rotur Pen Mandrel Spares
The Rotur Pen Mandrel Spares collection provides essential components to keep your pen turning setup in peak condition, ensuring precision and reliability.
Key Components:
Shaft & Nuts Set:
Material: High-quality precision-ground steel.
Features: 6.17mm diameter shaft with a 1/4" BSF thread for stability and accuracy. Compatible with Original and Deluxe mandrels.
4...
Saburrtooth 1/4'' Concave - 1/2'' x 3/4'' (Smooth End)
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/4'' Cross Cutter - 3/4''
Shape: Cross Cut Eyecutter
Diameter: 3/4''
Head Length: 3/4
Saburrtooth 1/4'' Cylinder - 1'' x 1''
Head Diameter: 1''
Head Length: 1''
Saburrtooth 1/4'' Rotosaw - 1 1/4'' x 1/4''
15% discount from price shown.
Saburrtooth 1/8'' Cylinder - 1/4'' x 1/2'' - (Smooth End)
15% discount from price shown.