Sort By
Per Page
View
Grid
List
.png "Last Ones!")
Norton Prep Stone
An artificial stone used for raising a slurry on fine grit finishing waterstones. The slurry is what does the cutting and polishing and the prep stone speeds up the slurry-making. After wetting the waterstone, rub it evenly with the prep stone which will create the slurry, even off the high spots and make for less frequent flattening of the waterstones.
Oscar Rush Side Axe - Left Grind
A hand forged, 130mm - 135mm (5 1/4'') edge side axe. LEFT grind.
The head weight is approximately 775g.
Handle - 320mm long (just over 1'') hand carved, faceted, kiln dried ash handle.
The leather cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This axe has been carefully designed as an all rounder rather...
Robert Sorby Cutter Holder
The Robert Sorby Cutter Holder is a handy little accessory which will accept most of the Robert Sorby cutters.
It avoids skinning fingers when sharpening.
Tip not included.
Henry Taylor Outcannel Firmer Gouges - Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F17 - 1/4" (6mm)
F18 - 3/8" (9mm)
F19...
Woodpeckers Edge Rule 150mm
Woodpeckers Woodworking Edge Rule - Metric 150mm (Includes Edge Rule Stop)
Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to jeep the rule parallel to your work. The...
Flexcut Mini Chip Knife KN20
The Flexcut Mini Chip carving knife has a 5/8' ultra thin blade, making unwanted chipping in delicate cuts less likely. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
James Barry Diamond File Tapered 3''
3" (81mm) versatile half round and flat tapered 400 grit file.
Precision ground steel file electroplated with 400 grit monocrystalline diamonds to ensure a superb even finish and finished with a split ergonomic handle pinned through the steel file and finished with a hanging hole for storage. Suitable for sharpening many woodworking tools including router cutters, forstner bits, woodturning...
Glenn Lucas 1'' Radius Edge Skew Chisel
Glenn Lucas 1'' Radius Edge Skew Chisel which is used for planing cuts and detailed work on spindles.
This is Glenn's preferred shape of skew chisel.
The handle is 10" in length
Robert Sorby Honing Wheel Arbor
Honing wheel arbor to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Arbortech Industrial Replacement Teeth and Screws
Three tungsten carbide teeth for use on the Arbortech industrial woodcarver blade. The cutting teeth are rotatable and replaceable so there's no need for sharpening.
Includes Screws.
Henry Taylor Woodcarving Punch - Diamond
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Flexcut No.11 Sweep Veining Gouges
The Flexcut No.9 Sweep Gouges are interchangeable blades with a steep curved cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
1/16" (2mm) SK602
1/8" (3mm) SK309
3/16" (5mm) SK409
1/4"...
Gyokucho Blade for Multi-Purpose Folding Saw
Replacement for the Gyokucho #810 saw
Robert Sorby ProEdge Knife Holder Small
The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long.
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Blue Spruce Optima Bench Chisels - Set of 4
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Kingfisher - Greetings Card
Kingfisher is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Blue Spruce Optima Bench Chisels - Set of 9
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Gyokucho 616 Ryoba 300mm + Spare Blade
The Gyokucho 616 Ryoba 300mm with a spare blade.
Henry Taylor Woodcarving Punch - 3 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - 4 x 2 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Asterisk with open centre
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Making Japanese Woodblock Prints
By Laura Boswell
Japanese woodblock printing is a beautiful art that uses a unique system of registration, cutting and printing. This practical book explains the process from design drawing to finished print, and then introduces more advanced printing and carving techniques, plus advice on editioning your prints and their aftercare, tool care and sharpening. Supported by nearly 200 colour photographs,...
Henry Taylor Woodcarving Punch - Diamond Pattern
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Sun
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Tormek Handbook
The Tormek handbook is included with each machine. It gives you the basics of sharpening and different techniques as well as user instructions and valuable tips for each jig and how to sharpen specific tools.
More than 600 detailed line drawings show, step by step, how best to sharpen most type of edge tools with the unique Tormek method. The updated design with wire-o-binding and plastic cover...
Tormek SB-250 Blackstone Silicon
Tormek Blackstone Silicon has been developed for shaping and sharpening* HSS and other exotic alloyed steels. It can also touch up tungsten carbide. It does not offer faster steel removal on ordinary carbon steel than the Tormek Original Grindstone.
The combination of abrasive hardness, shape and grain size is optimized to work efficiently at the Tormek system’s low RPM. Its faster material...
Auriou Rotary Rasps
These hand cut rotary rasps are very popular in Germany & Austria (not sure why really)
Like it's big brother above this rotary rasp will cut (not burn) your wood quite precisely. It works well on the Arbortech long angled grinder.
Small rotary rasp for Arbortech type grinders. Rounded edge grain 7 (medium).
Crucible Big Protractor
The FirstLightWorks Big Protractor is intended for anyone who needs to set out angular measurements and requires something bigger than the plastic protractor from your school maths set. Suitable for woodworkers, joiners, carpenters, chairmakers and anyone else who makes things using angles that aren't 90 degrees.
The FirstLightWorks Big Protractor is 300mm wide and made from 3.2mm 3-ply acrylic...
Flexcut 5 Piece Lino & Relief Printmaking Set SK130
This Flexcut 5 piece Printmaking Set contains 4 carving blades, a quick connect ABS handle, 11 pocket tool roll, as well as a custom strop and polishing compound.
Relief printing is based on a reductive process - carve the non image away from a flat, level surface and ink the remaining top surface with a roller or brayer in order to print the image.
Profiles included:
SK306 #6 x 5/16''
SK309...
Flexcut Hook Knife KN26
The Flexcut hook knife blade is curved, similar to a gouge for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.
Flexcut Mini-Palm Set FR604
As the name implies, this Flexcut set was made for miniature carving. Model-makers, as well as those who enjoy carving fine detail, find these tools quite handy. Ranging in size from 1/8-inch down to 1/16-inch, these tools make others seem like crayons when you really need a sharp pencil.
Palm Tools included: FR600 #3 x 1/8', FR601 #5 x 1/8', FR602 #11 x 1/16', FR603 70 deg. x 1/8'.
Gyokucho Blade for Compact Dozuki 180mm Crosscut (297)
Replacement for the Gyokucho #297 saw
Hamlet Multi-Tip Scraper & Cutters
This versatile tool from Hamlet comes with three inter-changeable tips, which can be oriented to any position to give the most suitable angle of presentation to the work.
The three tips/cutters are round, pear and square in shape.
Handle is 10'' in length
Inlay Thicknessing Gauge
The Latta Thicknessing Gauge by Red Rose Reproductions
Used to trim stringing to a precise thickness to fit into the grooves made by the radius cutter and straight-line cutter. This tool has two cutters, and one can be set up to get the stringing close to size, and the other for the final sizing.
Hard Maple body with an oil finish.
Left Handed Auriou Albi Combination Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE.
These are stitched on both faces with two "safe edges" on either side.
The rasp is thinner close to its tip to allow ease of entry into your workpiece. For flat and convex work only.
As normal, the longer the rasp, the coarser it is. We offer 2 sizes. The sizes shown are the rasp dimensions without the...
Lie-Nielsen Drawer Lock Chisel Pair
Chris Becksvoort came to Lie-Nielsen with this greatly improved design for a traditional tool. This special pair of chisels is indispensable for cutting small mortises in tight places - such as setting a drawer lock into a piece of furniture.
A2 Tool Steel, precision ground. Blade widths are 1/2'' and 1/4''. Blade length is 1'', with a cutting depth of 11/16'' on...
Lift Bridge Wooden Kit
Used mainly for railways, a lift bridge is a comon sight around the world. This DIY kit, based on a truss design, will provide hours of imaginative play for kids of all ages!
Pre-cut pieces and everything needed to make an amazing working model.
Easy-to-make.
Sustainably sourced wood.
Suitable for ages 7+.
Supports STEM curriculum.
PEC Tools 12' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0010").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
Pfeil Half Moon Knife
Pfeil Half Moon Knives are great for for cutting and skiving leather.
The knives are available in 125mm and 150mm blade widths. Blade thickness is 1.5mm on both.
Oiled cherry handle with brass ferrule.
Robert Sorby Bowl Reversing Jaws
Robert Sorby Bowl Reversing Jaws are designed for finishing the outside and foot of a bowl. Lightweight, but extremely strong solid aluminium construction with 10 different location points to hold a variety of sizes of bowl. Rubber grips hold the project in place without causing damage.
Maximum bowl diameter 9". 10" capacity over bed bars.
The photo shows the Bowl Reversing Jaws fitted to a...
Saburrtooth 1/4'' Concave - 1/2'' x 3/4''
Head Diameter: 1/2''
Head Length: 3/4''
Saburrtooth 1/8'' Burrs Set - Coarse
This set of 1/8'' burrs from Saburrtooth includes the following in Coarse (green):
18BN14 Ballnose
18C14 Cylinder
18F38 Flame
18S38 Sphere
18BUD14 Bud
Saburrtooth 1/8'' Burrs Set - Fine
This set of 1/8'' burrs from Saburrtooth includes the following in Fine (yellow):
18BN14 Ballnose
18C14 Cylinder
18F38 Flame
18S38 Sphere
18BUD14 Bud
Saburrtooth 1/8'' Cylinder - 1/8'' x 7/8''
Saburrtooth 1/8'' Cylinder available in fine and coarse.
Head Diameter: 1/8''
Head Length: 7/8''
Saburrtooth 1/8'' Dove Tail Acute - 3/8'' x 3/8''
Head Diameter: 3/8"
Head Length: 3/8"
Spoon Carving:
From Log to Spoon
From Log to Spoon
by Alex Finberg
Whatever your experience, this book has all the instructions you need to carve beautiful spoons from logs of green wood. Author Alex Finberg walks you through every stage of the process with clear explanations and some 400 stunning photos. At the core of the book is a 25 step sequence that illustrates how to carve functional cooking spoons and beautiful eating spoons from a log....
Surfer Airplane Wooden Kit
The new Sky Surfer launches planes in a predictable and repeatable way – for testing your airplane designs so you can figure out the best way to make planes for long flights, returning flights and those fancy trick flights like loop-de-loops, and landing in the cat bowl.
An easy to make and use kit with foam pads, extra elastics and a world of great individual and family fun – learning...
Thomas Flinn Pax Reversible Gent's Saw 10'
The Reversible Gent’s Saw has been made in such a way to facilitate the left and right-handed worker. The cranked rosewood handle allows you to cut into the most awkward of corners with ease.
This saw has a brightly polished brass back and a Walnut handle. Blade length 10". Individually blister packed. 15tpi as standard.