Sort By
Per Page
View
Grid
List
Lie Nielsen No.66 Replacement Blades for L-N66
Seven hardened, double-ended blades will make 14 standard shapes. The blades will fit antique Stanleys as well, for those who have or acquire one without blades. Made from A2 Tool Steel, 5/8" (1.58cm) wide.
The blade profiles include:
1/16", 5/64", 1/8", 5/32", 3/16", and 1/4" Single Beads
3/32" and 1/8" Fluting
1/8" Double Reed
1/16" and 5/64" Triple Reeds
1/16" Quadruple Reed
3/32" Double Concave
3/32"...
Henry Taylor Woodcarving Punch - Rounded Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Sun
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Open Rounded Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Flower 4
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Tormek SJ-200 Japanese Waterstone
This is the smaller version of the Tormek Japanese Waterstone suitable for the T-4 machine.
The Tormek Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
This waterstone excels at sharpening hand tools like carving tools, knives,...
Blade for the Veritas Small Scraping Plane
Replacement blade for the Veritas Small Scraping Plane 05P2950.
Carving the Pineapple with Mary May
In this DVD, Mary May demonstrates how to carve the pineapple, a traditional symbol of hospitality and welcome. She will teach you how to transfer the design to your wood piece, secure it to a backer board, which tools to use, and then show you how to carve the pineapple from start to finish.
Mary May is a professional woodcarver in Charleston, SC, who specializes in decorative carvings for architecture...
Crucible Centre Square
The steel centre square from Crucible Tool.
3-1/4'' (82mm) long x 1-5/8'' (16mm) wide x almost 3/8'' (9.5mm) thick overall. The working area of the blade is 2-7/16'' (62mm) long and includes a 1/8'' (3mm) hang hole. It is ideal for chairmakers or turners who need to mark the centers of spindles or sticks for turning or shaving.
Using the tool is simple....
Fisch Elite Black Auger Bit Set of 5
The Fisch sets of 5 auger bits are available in 2 lengths, 235mm and 320mm.
The sets are supplied with 12mm, 14mm, 16mm, 18mm & 20mm diameter bits.
These German manufactured auger bits have an enviable reputation for superior quality.
Auger bits to satisfy demand from our discerning and growing customer base.
Fisch Elite Black auger bits have a corrosion resistant coating that results...
Flexcut 10 pc. Deluxe Mallet Tool Set MC100
This 10 pc. Deluxe Mallet Set is quite versatile with gouges ranging from 1/8" for detail to 1" for hogging off large amounts of waste wood. These tools can be used by hand or can be struck with a mallet and will suit the needs of both novice and advanced carvers.
Mallet Tools included: MC203 #3 x 1/2", MC403 #3 x 1", MC505 #5 x 1-3/16", MC307 #7 x 11/16", MC309 #9 x 1/2", MC511 #10 x 3/4",...
Flexcut Pocket Jack 2.0 JKN289
Pocket Jack® 2.0 for Carvin' now features a new cross-etched, aerospace aluminum handle, giving you greater carving control.
This Flexcut jackknife is a streamlined version of the Carvin’ Jack®, the first folding multi-tool designed specifically for the needs of woodcarving. It weighs 3.9 ounces and has a closed length of 4-1/4”.
Includes: Detail Knife, Straight Gouge,...
Gifkins A10 Dovetail Jig
The A10 Gifkins Box Maker's Dovetail Jig. This dovetail template cuts a medium-sized dovetail joint. It’s our most popular template because it offers you—the box maker—a versatile timber thickness range: 5mm to 13mm. The A10 cutters have 1/4-inch cutters. Use thinner timber for delicate boxes and fine insert trays. Use thicker timbers for large jewellery boxes, drawers, file trays,...
Gyokucho Dozuki Cross & Rip Bundle - Rattan
The Dozuki 240mm Crosscut #371 and Rip Cut #372 saws with a traditional rattan handle.
Gyokucho Multi-Purpose Folding Saw
Blade Length : 200mm.
Overall Length : 415mm (235mm closed).
Max Cutting Depth : N/A.
Teeth Pitch / TPI : 2.2mm 11.5.
Blade Thickness : 0.7mm.
Teeth Pattern : Universal.
Gyokucho Product Number : 810.
Weight : 210g.
Replacement Blade : S810
A bit of a Swiss Army knife as this saw can work on many different materials such as softwoods and hardwood (not exotics), wet timer (greenwood),...
Henry Taylor Hand Adze Deep Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes; this one is a tight incannel gouge (sweep 9), and is offered with an incannel or outcannel grind.
The outcannel grind is favoured by those working concave surfaces as it allows the leading edge to enter the working area easier.
At the other end to the cutting edge is a square faced hammer...
Hide Mallet Size 10
The head is 89mm (3.5'') in diameter, the length is 140mm (5.5'') and it is made of hide (see below). The total length is approximately 255mm (14'') long and the handle is wooden.
Ideal for the jewellery trade, sheet metal work, die cutting industry and use on copper, brass and soft metals.
This hide mallet has been manufactured from genuine Water Buffalo hide tightly...
Lie-Nielsen Drawbore Pins
Drawboring is a great way to make a strong mechanical joint. A wooden pin is hammered through slightly offset holes in the two pieces, and pulls the joint together. You use Drawbore Pins to pull the joint together first (with some force and a twisting motion). This eases the edges of the hole, making driving the wood pin easier. You can also disassemble the joint if you want to work on the fit some...
Matumi
Similar to Goncalo Alves, turns tight and can take fine detail bit the wood is waxy to the touch which helps with turning but can clog abrasives
.png "Last Ones!")
PEC Tools 12' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0010").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
ProEdge Knife Sharpening Accessory Kit
The main jigs and belts required for sharpening you kitchen knives on the Robert Sorby ProEdge.
The Robert Sorby ProEdge Knife Sharpening Accessory Kit includes......
Raised Wear Platen/Back Plate
Universal Arm
Small Knife Holder with angle adjustment collar
Large Knife Holder with angle adjustment collar
Allen Key/Wrench
Aluminium Oxide Belt 60 grit x1
Aluminium Oxide Belt 240...
Replacement Blade for Lee Valley Replica Spill Plane
Replacement blade for the Lee Valley replica spill plane.
Resin Infused Blocks
These resin infused Blocks are high-quality wooden blocks that have been pressure impregnated with coloured resin. This gives the block enhanced stability and strength as well as adding an attractive colour.
These blocks, available in stunning finishes like Curly Maple and Poplar Burr (Mappa Burr), are ideal for various projects, including making knife handles, mallet heads, chisel handles or for...
Rob Cosman Bench Crosscut Saw
Every hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. Rob has designed and manufactured two different professional crosscut saws; his Joinery Crosscut and Bench Crosscut to meet this requirement.
Both of Robs crosscut saws are specialized for crosscutting applications. The Bench Crosscut Saw is designed for general crosscutting while his Joinery Crosscut...
Robert Sorby Detail Point Tool - 822H
This is a 3/8" round shaft with a 3 facet point. Ideal for for fine detailing on bowl and spindle work.
Robert Sorby Pen Turning Set
The perfect pen turning tool set. All the tools needed to rough down the pen blank, clean up the ends and perfectly shape the finished pen.
Comprises 5/16" roughing gouge, 1/16" parting tool & 1/2" spindlemaster.
Rotur Cross Type Pen Ink Refills
The Rotur Cross Type Pen Ink Refills offer a reliable and smooth writing experience for users of Cross-style pens. These refills are known for their durability and high-quality ink, which is resistant to smudging and fading, ensuring your writing remains clear and legible over time.
Key Features:
Smooth Writing: The specially formulated ink provides a consistent, rich color that flows effortlessly...
Rotur Keyed Chuck and Mandrel
Keyed Chuck & Mandrel Set
Saburrtooth 1/4'' Cross Cutter - 1/2''
Shape: Cross Cut Eyecutter
Diameter: 1/2''
Head Length: 1/2
Saburrtooth 1/4'' Cross Cutter 1''
Shape: Cross Cut Eyecutter
Diameter: 1''
Head Length: 1"
Saburrtooth 1/4'' Cylinder 3/4'' x 1 1/4'' (Smooth End)
15% discount from price shown.
Saburrtooth 1/8'' Ball Nose - 1/8'' x 7/8''
15% discount from price shown.
Spare Blade for Lie-Nielsen No. 041 Small Shoulder Plane
Replacement blade for Lie-Nielsen No. 041 Small Shoulder Plane. Comes with a 25° flat ground bevel.
5/8" wide x .140" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 2 Bench Plane
Replacement blade for the Lie-Nielsen No. 2 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen No. 7 1/2 Low Angle Jointer
Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel.
2.300" wide x .240" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 97 1/2 Small Chisel Plane
Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel.
1¾" wide x 3/16" thick
A2 cryogenically treated Tool Steel
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
Woodpeckers Micro Combination Square
Woodpeckers new Micro-Squares go where other squares just can't fitting in the narrow openings of your precision joinery. The small combination square includes two blades, one 1/2'' wide and one 1/4'' wide.
The 1/4'' is ideal for checking the cheeks of tiny dovetail sockets and the walls of mortices. The 1/2'' blade handles the more general work such as layout,...
Auriou Stone Rifflers - Rhombus / Brush
The Auriou Stone Rifflers - Rhombus / Brush are expertly crafted tools designed for detailed stone carving. These rifflers are hand-stitched with a comfortable "fat" hexagonal barrel handle, which allows you to work for extended periods without discomfort. Specifically made for working with stone, these rifflers feature a coarser cut than those made for wood, making them ideal for efficient...
Build a Shaving Horse with Peter Follansbee
“A shaving horse goes together with a drawknife like peanut butter and jelly”, says chairmaker Curtis Buchanan. In this video, Peter Follansbee shows you how to build an effective shaving horse based on his work with Jennie Alexander and traditional English patterns. Peter’s design features an adjustable work surface and two uprights connected by a foot treadle and a crossbar. Pushing forward...
Flexcut Detail Jack JKN90
The Flexcut Detail Jack can handle a variety of projects start to finish. Its single detail knife quickly removes wood from convex surfaces, while its fine point is perfect for detailing delicate areas.
The Pistol Grip handle design is crafted from aerospace-grade aluminium and is ergonomically designed to allow a strong grip for long periods of carving with minimal hand fatigue.
Handscrapers: Understanding, Preparing and Using the Ultimate Finishing Tool DVD
with Christopher Schwarz
Christopher Schwarz brings the lowly Handscraper to life. He clearly shows effective sharpening methods that will help you master the ultimate finishing tool.
30 minutes, DVD
Robert Sorby Midi Hollowmaster
The Robert Sorby Midi Hollowmaster is designed for generating square sections such as shoulders or tenons where a turned part is to be assembled into a hole - a chair leg is good example. This cutter is also useful on the outside of a round form, as well as long straight sections on spindle work. Excellent results can be achieved in shear scraping mode with cutter especially effective shear scraping...
Gyokucho Fugaku Kataba + Spare Blade
The Gyokucho Fugaku Kataba with a spare blade.
Robert Sorby Multi-Tip Hollowing Tool
The Robert Sorby Multi-Tip Hollowing tool is one of the most versatile hollowing tool.
It is ideal for end and side grain and will under-cut rims.
Also included is a scraper blade for half round, shallow and flat work as well as shear scraping. New beading and coving cutters can also be fitted.
Includes use and sharpening instructions.
Woodpeckers Micro Square Combo Set and Double Square
Woodpeckers new Micro-Squares go where other squares just can't fitting in the narrow openings of your precision joinery. Both the small combination square and the smalll double square include two blades, one 1/2'' wide and one 1/4'' wide.
The 1/4'' is ideal for checking the cheeks of tiny dovetail sockets and the walls of mortices. The 1/2'' blade handles the...