Sort By
Per Page
View
Grid
List
Pfeil Sculpture's Adze
The Pfeil Sculptor's Adzes follow old French designs.
Available with Straight, Curved or Round blades, these tools are forged from quality tool steel, hardened and sharpened with Hickory handles.
Straight:
Overall length 450mm (about 18").
Weight 800gms.
Cutting edge of 65mm.
Curved:
Overall length 450mm (about 18")
Weight 850gms.
Cutting edge of 60mm.
Round:
Overall...
Spare Blade for Lie-Nielsen No. 3 Smoothing Plane
Replacement blade for Lie-Nielsen No. 3 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Hamlet Hollowing Gate
Available in 19mm (3/4") and 25mm (1"). Other stem sizes can be made to order, but will have a longer lead time.
Burn
by Ben Short
David Barron Saw & Guides Bundle
The ever popular Gyokucho Razorsaw Dozuki 240mm Rip saw bundled together with the David Barron 1:6 and 1:8 dovetail guides plus the 90 degree guide. This is the saw David recommend using with his guides.
Robert Sorby Thread Cutting Sets - 89HS
The Robert Sorby Thread Cutting Sets comprise a choice of 10, 16 or 20 tpi thread cutter pairs made in high speed steel with a unique helix angle for use in wood, a thread & sizing gauge and an instructional DVD "Focus on Threadcutting"
We also stock the Relief Cutting Tool (RS-895H), Tool Support (RS-893H) and the Thread and Sizing Gauge (RS-973) - all of these will make the forming...
Stone Flattener
Length 400 mm, width 100 mm including glass plate and sanding paper. It is important to flatten your sharpening stone periodically.
Comes with 1 piece each of 60 and 80 grit paper. Abrasive is sticky backed to attach to the flattening block.
Woodpeckers in-DEXABLE Combi Square
The Woodpeckers in-DEXABLE Combination Square with 300mm metric blade and Rack-It.
The combination square was invented in 1878 and has been copied countless times over the years, but it has rarely been improved upon. The Woodpeckers in-DEXABLE Combi Squares features the following......
Laser accurate scribing guides every millimetre.
Positive indexing every 30mm.
Laser engraved metric...
Flexcut Power Gouge Interchangeable Handle RG102
Allows any RG range reciprocating gouge to be used as a hand tool.
Flexcut Pro Series 3 Pack of Knives with Full Size Handle FP200
This set of three knives from new Flexcut Pro Series ranged delivers a balanced range of blades for users looking for the ultimate Flexcut Pro experience with a full sized handle. The set includes:
1 5/8'' Carving Knife
1 3/8'' Detail Knife
1'' Chip Carving Knife
Robert Sorby Buffing Mop
Buffing Mop to fit the ProEdge Sharpening Machine.
Also part of the Buffing Kit (PEBUFFKIT)
Build a Dutch Tool Chest with Chris Schwarz
Tool chests come in many sizes and shapes. The Dutch Tool Chest is roomy, but portable – well thought out storage for the essential kit of tools for hand tool woodworking. Chris Schwarz builds these in a weekend.
Chapters
1. Introduction
2. Stock Selection and Orientation
3. Lay Out Baselines and Dovetails
4. Cutting Dovetails
5. Lay Out and Cut the Pins
6. Dados
7. Assemble the...
Connells Chisel Guard Set 2 - Large
Set contains the following leather chisel guards: 2 x 3-3/8", 2 x 2-3/8", 2 x 2''
Pegas Progressive Skip Tooth Blades
Enhance your scroll saw projects with Pegas Progressive Skip Tooth Blades, designed for superior performance across a wide range of materials. Whether you're working with wood, plastic, bone, Corian®, or other fibrous materials, these blades deliver clean, precise cuts every time.
Versatile Cutting: Perfect for wood, plastic, bone, Corian®, and most fibrous materials, ensuring versatility...
Kutzall 1/4'' Taper Burr - 3/4'' x 1-1/4''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Woodpeckers Edge Rule 150mm
Woodpeckers Woodworking Edge Rule - Metric 150mm (Includes Edge Rule Stop)
Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to jeep the rule parallel to your work. The...
Flexcut No.5 Sweep Gouges
The Flexcut No.5 Sweep Gouges are interchangeable blades with a shallow cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
2.5mm (micro) SK802
1/8" (3mm) SK601
9/16" (14mm) SK401
1...
Barr 3 1/2'' Leather Guard
Designed to fit the Barr Scarf and Fat Boy Slicks, these hand-crafted leather guards will help protect your investment. The guard has an ABS plastic backing insert which is sandwiched between saddle grade leather, stitched and riveted. Will also fit other chisels upto 3 1/2" wide, but designed with the Barr Scarf and Fat Boy slicks in mind.
Bee on a Comb - Greetings Card
Bee on a Comb is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
15cm x 15cm
Glenn Lucas 1'' Radius Edge Skew Chisel
Glenn Lucas 1'' Radius Edge Skew Chisel which is used for planing cuts and detailed work on spindles.
This is Glenn's preferred shape of skew chisel.
The handle is 10" in length
Robert Sorby 3/8' & 5/8' Bead Cutting Tip
The Robert Sorby Bead Cutter is one of a few additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 3/8" and 5/8" and is one of two beading cutters available for this tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
Pfeil Medium Sized Tools - Long Bent Gouge
Pfeil Medium Sized Tools for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The D7L Series 7 Long Bent Gouge is available in 10mm width.
Set of 3 Narex Marking Knives
Set of 3 Narex Marking knives; 2.5mm, 1.2mm, & 0.75mm.
The Narex marking knife is an essential tool for creating marks on wood when laying out precision joinery or transferring measurements. The flat handle profile prevents the knife from rolling off the bench.
With the addition of laser cut finger indents which are useful for applying pressure closer to the tip.
Handle: Polished Rosewood...
Toothed Blade for the Lie-Nielsen 102 Block Plane
Replacement blade for the No. 102 or No. 103 Block Planes. Comes with a 25° flat ground bevel.
1.250'' wide x .125'' thick
A2 cryogenically treated Tool Steel
Toothed blades have small chisel-like teeth .030'' (.762mm) wide, and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
Please...
Flexcut Macaroni Tool - 7/16'' (11mm) SK735
The Flexcut SK735 Macaroni Tool is an interchangeable blade used for wood carving. It has "Macaroni" edge, which combines two shapes into one - the flat chisel and the V-tool. It is 7/16'' (11mm) wide.
This unhandled V-tool is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal...
Kingfisher - Greetings Card
Kingfisher is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Lie-Nielsen No.1 Iron Smoothing Plane
The Lie-Nielsen No.1 Smoothing Plane in iron. This is based on the famous (and somewhat scarce) Stanley No.1. The size makes it more comparable to a block plane than a smoother but nonetheless this small bench plane is suitable for detail work.
5-1/2" (14cm) long
Blade is 1-3/16" (3cm) x .110" (2.79mm) thick.
Weight is 1.35 lbs. (612 grams)
Henry Taylor Woodcarving Punch - 3 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Making Japanese Woodblock Prints
By Laura Boswell
Japanese woodblock printing is a beautiful art that uses a unique system of registration, cutting and printing. This practical book explains the process from design drawing to finished print, and then introduces more advanced printing and carving techniques, plus advice on editioning your prints and their aftercare, tool care and sharpening. Supported by nearly 200 colour photographs,...
Henry Taylor Woodcarving Punch - Cross 4
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Tormek Drill Bit Sharpener
With the Tormek Drill Bits Sharpening Attachment you can now sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape.
Tormek LA-124 Set of Optional Narrow Discs
For use with the Tormek Profiled Leather Honing Wheel LA-120. Includes two discs, one with a 2mm (3/32") radius and one with a 45° tip.
These smaller disc profiles permit the honing of small carving tools with very narrow profiles.
The Stick Chair Journal Bundle
Both issues of The Stick Chair Journal (1&2).
Arbortech SpheroPlane
You can create a spherical wooden bowl or ball without a lathe using the Arbortech SpheroPlane®. This tool attaches to your angle grinder and features an adjustable carving radius, allowing you to create projects both large and small. You can transform a rough piece of wood into a finished masterpiece easily with the included Sanding System. A must have in your workshop, the SpheroPlane® turns...
Auriou Rotary Rasps
These hand cut rotary rasps are very popular in Germany & Austria (not sure why really)
Like it's big brother above this rotary rasp will cut (not burn) your wood quite precisely. It works well on the Arbortech long angled grinder.
Small rotary rasp for Arbortech type grinders. Rounded edge grain 7 (medium).
Beading Tool Set
Robert Sorby bead forming tools to cut perfect semi-circular beads every time.
The nose design permits multiple bead designs.
This ia a boxed set of 5 RS-835H Bead Forming Tools 1/8", 3/16", 1/4", 5/16" & 3/8" .
Blade for Veritas Low-Angle Spokeshave
Replacement PM-V11 blade to the Veritas Low-Angle Spokeshave (05P3273).
Brusso Brass Butt Hinge with Ball Finials CB-303B
The Brusso CB-303B full mortice butt hinge with ball finials, milled from heavy brass stock, is one of four different sizes manufactured for boxes and small cabinets. It measures 1-1/4" x 1-1/16". Available without ball finials as CB-303.
Length: 1.250" - 1-1/4" - 32mm
Width: 1.063" - 1-1/16" - 27mm
Leaf Thickness: 0.085" - 5/64" - 2mm
NOTE - All Brusso...
Brusso Jig TJ-101
For Brusso Stop Hinges JB101 and Butt Hinges CB301 (with or without ball finials).
Coarse, Medium and Fine Chris Schwarz
Most woodworking projects involve roughing, refining and finishing operations. In this DVD, Chris explores the right tool to use for each stage. He groups tools by which operations they perform. By choosing the right tool for each step, woodworking can be very precise and fast. and the hand tool will often be the most effective choice. 65 minutes, Lie-Nielsen Toolworks Productions.
Flexcut Pro Series 1 3/8'' Detail Knife FP01
The 1 3/8'' Flexcut Pro Detail Knife features a narrowly tapered full flat grind wharncliffe blade in precision, heat treated 1095 steel, polished to a brilliant mirror finish.
This knife excels at precise detail carving work. The shorter blade length, slim profile, and narrower detail tip provides the highest level of precision and control.
Gyokucho Razorsaw Tatebiki Noko 240mm
Full Name : Gyokucho Razorsaw Tatebiki Noko.
Blade Length : 240mm.
Overall Length : 530mm Rattan / 540mm TPE.
Max Cutting Depth : 45mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Cutting Width : 0.52mm.
Teeth Pattern : Rip.
Gyokucho Product Number : 303 Rattan / 304 TPE.
Weight : 195g Rattan / 255g TPE.
Replacement Blade : S303
A very versatile rip dovetail...
Hock Carving Knives - Set of 5
The blades of these comfortable carving knives are made from Hock's high carbon steel, hardened to Rc62 (if that sounds familiar it's because that's the same steel and hardness as Hock's high-carbon knives and plane blades) easy to hone to the sharpest possible edge.
The lengths listed are an approximate blade length.
The set includes: 1" Carving Knife, 1¼" Carving Knife, 1" Chip Carver Knife,...
Journeyman Handcrafts Wool Lined Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from a two colours of 8oz waxed cotton canvas giving a lovely contrast of colour when rolled up. The tool roll is lined with a cream wool to give added protection to your tools.
This tool roll is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon...
Rob Cosman Kerf Saw X-10 3/4
If you cut half-blind dovetails you will love Rob's Kerf saw! This is the narrower Ker X-10 3/4 to work in saw kerfs in the .019" to .021" width range (designed for Rob's 3/4 dovetail saw).
The Kerf X-10 3/4 completes the saw cut.
Waste removal is faster than paring and more accurate. This saw works with soft and hardwoods.
The handle is made of Mahogany and the blade is...
Rob Cosman Large Tenon Saw - Rip Cut - Ebony Resin Handle
Unique features include;
Start the kerf easily with the Super Fine 20 tpi starting tip, then gain the speed you need for heavy cuts with the 12 tpi blade - we eased the angle of the cutting face a few degrees to reduce the grabbing that accompanies larger saw teeth.
Very slight .002” (per side) set makes for dead straight saw cuts and smooth ready to glue surfaces - the blade is 12 inches...
Robert Sorby Hollowmaster
The Robert Sorby Hollowmaster is the perfect complement to the Multi Tip Hollowing Tool. It uses the same unique design of a meaty 3/4" flat shank which when laid on the tool rest gives ample support to prevent the tool from being turned over by the rotation of the wood. You are not fighting the laws of nature, but removing wood with ease.
It's swan neck design means that the Hollowmaster...