Sort By
Per Page
View
Grid
List
Gifkins F5 Finger Jig Template Upgrade Kit
The F5 template cuts a joint with delicate 5 mm fingers, and is fully adjustable, maintaining the quality and accuracy that is synonymous with products from Gifkins product range.
The template uses a specially designed solid carbide cutter and will handle any thickness up to a maximum of 13 mm. As with dovetailing, the finger joints are cut on a table mounted router, giving the operator much greater...
Robert Sorby Thread Cutting Sets - 89HS
The Robert Sorby Thread Cutting Sets comprise a choice of 10, 16 or 20 tpi thread cutter pairs made in high speed steel with a unique helix angle for use in wood, a thread & sizing gauge and an instructional DVD "Focus on Threadcutting"
We also stock the Relief Cutting Tool (RS-895H), Tool Support (RS-893H) and the Thread and Sizing Gauge (RS-973) - all of these will make the forming...
Crown Tools HSS Continental Spindle Gouge
These are Crown Tools versions of Continental Spindle Gouges which are similar to the old carbon steel gouges.
Continental spindle gouges are made by forging a curved blade from a flat bar (similar to a roughing gouge but shallower) and depending on the size can be used like a standard gouge and also a small roughing gouge.
To measure a continental gouge you measure the width across the top of...
Flexcut Power Gouge Interchangeable Handle RG102
Allows any RG range reciprocating gouge to be used as a hand tool.
Gloforce 225mm Gooseneck Extension
This Glofroce 225mm Gooseneck extension is slightly shorter than the 270mm version but slightly thicker and even more secure.
It can be used with the Eye-Light Pro, Suction Cup or MagFoot and comes with a female 1/4" UNC thread on one side and a male 1/4" UNC thread on the other.
Flexible extension arm for positioning Gloforce accessories such as the Eye-Light Pro, Suction Cup, or MagFoot with...
Build a Dutch Tool Chest with Chris Schwarz
Tool chests come in many sizes and shapes. The Dutch Tool Chest is roomy, but portable – well thought out storage for the essential kit of tools for hand tool woodworking. Chris Schwarz builds these in a weekend.
Chapters
1. Introduction
2. Stock Selection and Orientation
3. Lay Out Baselines and Dovetails
4. Cutting Dovetails
5. Lay Out and Cut the Pins
6. Dados
7. Assemble the...
Kutzall 1 3/4'' Polyplug Insert
Enhance the performance of your Kutzall Contour Wheels with these PolyPlug (3/8'' bore) Accessories! They are designed to fit inside the wheels to help optimize performance and extend their life.
Reduces vibration for a smoother, quieter, and more comfortable operation.
Increases mounting accuracy resulting in a more 'true' operation - also allows the wheel to wear evenly for...
Barr Small Slick
Built with the same fine construction as the large slick, the small slick has a 5" blade length making it a little less hefty.
2½" cutting edge, 5½" blade length, length from cutting edge to end of socket 12", length with handle 26
Any Port - Greetings Card
Any Port is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Flexcut No.5 Sweep Gouges
The Flexcut No.5 Sweep Gouges are interchangeable blades with a shallow cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
2.5mm (micro) SK802
1/8" (3mm) SK601
9/16" (14mm) SK401
1 1/16"...
Mastercarver Flex-Shaft Essential Set
The Mastercarver Flex-Shaft Essential Set includes the following maintenance items:
Spare Inner Flex-Shaft x2
Spare Outer Sheath x1
Pro Flex-shaft Lube x1
Note: parts will fit on all 1/2hp, 1/3hp & 1/4hp Mastercarver® Flex-shaft motors from 1985 to present.
Includes instructions.
Robert Sorby 1/4'' & 1/2'' Bead Cutting Tip
The Robert Sorby Bead Cutter is one of five additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 1/4" and 1/2" and is one of two beading cutters available for this tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
Auriou Locksmiths Rasp
This is a very typical old French combination shaped rasp. It is called a locksmiths rasp and has a large knife shaped end and a rat tail end.
It is 250mm overall (10 inches) and is used to shape mortises or grooves, not just by locksmiths nowadays but used by sculptors.
Grain 9.
Bee on a Comb - Greetings Card
Bee on a Comb is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
15cm x 15cm
Set of 3 Narex Marking Knives
Set of 3 Narex Marking knives; 2.5mm, 1.2mm, & 0.75mm.
The Narex marking knife is an essential tool for creating marks on wood when laying out precision joinery or transferring measurements. The flat handle profile prevents the knife from rolling off the bench.
With the addition of laser cut finger indents which are useful for applying pressure closer to the tip.
Handle: Polished Rosewood...
Woodpeckers Engle Angle 6''
Woodpeckers Engle Angle 6'' (150mm). 2023.
This tool is inspired by the vintage #30 Stanley Angle Divider from 1903. By fitting the connected legs into an existing corner, the tool bisects the angle automatically. This is particularly important when mitering trim for existing structures. Corners that should be 90° are quite often not. If the corner is 88° instead of 90° the Engle...
.png "Last Ones!")
Saburrtooth 6mm Cylinder - 3/4'' x 1''
15% discount from price shown.
Toothed Blade for the Lie-Nielsen 102 Block Plane
Replacement blade for the No. 102 or No. 103 Block Planes. Comes with a 25° flat ground bevel.
1.250'' wide x .125'' thick
A2 cryogenically treated Tool Steel
Toothed blades have small chisel-like teeth .030'' (.762mm) wide, and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
Please...
Veritas Lapping Kit Set of Five 2 oz Containers - 05M0101
Silicon carbide is ideal for flattening oil and water stones or lapping plane bottoms and blades. Just sprinkle the grit on a piece of glass or a steel lapping plate, add a shot of oil or water (as required), and lap the item flat. This fast and easy process lets you keep all of your stones dead flat.
A set of five 2 oz containers of 90x, 180x, 280x, 400x and 600x and instructions. 90x is used for...
Henry Taylor Woodcarving Punch - Acorn
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Veritas Pullshave
After a long hiatus the popular Veritas Pullshave has made a comeback. The pullshave was designed for hollowing or recessing an area; for example, shaping and smoothing chair seats. Their unique design is the result of taking a convex spokeshave and reconfiguring it with a handle and knob to make it both easier to use and better suited to rigorous work - there is no tool like it on the market. It will...
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle.
This set of 5 comes in a cardboard presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1''
Fitted with a tapered brass ferrule for comfort and elegance.
Arbortech Sanding Pad for Power Carving Unit
100mm sanding pad for the Arbortech Power Carving Unit is slightly flexible, making it good for sanding medium to large projects and capable of moulding to slight contours. It has a hook and loop facing for rapid abrasive changing. Use the Sanding Pad in combination with the Chip Catcher and attach to a vacuum for wood dust control or with the Levelling Guide to achieve flat, smooth surfaces.
Blue Spruce Spearpoint Blade for Chisel Plane
A spearpoint blade to fit the Blue Spruce Chisel Plane. Gets you into the tight spots that the flat blade struggles with.
A2 steel. Honed and ready to go.
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Henry Taylor Woodcarving Punch - Star
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Flower 4
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Veritas PM-V11 Blades for Vintage Bench Planes
Veritas offer top-quality replacement blades for other manufacturers’ bench planes (e.g., Stanley or Record) in PM-V11 tool steel. All are lapped on the face side to a flatness tolerance of 0.0005'' (0.0127mm) or better, with an average roughness (Ra) of 5 microinches (0.000127mm) or better.
The blades are 0.100'' (2.54mm) thick, 25% thicker than the industry standard of 0.080''...
![Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]](/images/products/small/3937_10049.jpg "Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]")
![Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]](/images/products/small/3937_10052.jpg "Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]")
Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]
Ergonomically shaped handle for optimum comfort with a straight 38mm blade with fine a point for detail work.
New, old stock in original packaging.
Described as a detail knife.
Bessey TW16-2K 3/4'' Bench Hold Down
The Bessey Hold Down Clamp with the 19mm adaptor to work on workbenches with 3/4" holes.
Clamping depth 100mm.
Max. clamping height 200mm.
High quality 2-component plastic handle with smooth-running trapezoidal threaded spindle.
Includes the 19mm (3/4") adaptor.
If you are looking for this to work with a workbench which has 1" holes (such as the Sjoberg Elite range)...
Brusso Brass Butt Hinge with Ball Finials CB-303B
The Brusso CB-303B full mortice butt hinge with ball finials, milled from heavy brass stock, is one of four different sizes manufactured for boxes and small cabinets. It measures 1-1/4" x 1-1/16". Available without ball finials as CB-303.
Length: 1.250" - 1-1/4" - 32mm
Width: 1.063" - 1-1/16" - 27mm
Leaf Thickness: 0.085" - 5/64" - 2mm
NOTE - All Brusso...
Brusso Jig TJ-680
For Brusso quadrant hinges HD680.
Gyokucho Dozuki Cross & Rip Bundle - Rattan
The Dozuki 240mm Crosscut #371 and Rip Cut #372 saws with a traditional rattan handle.
Hamlet Big Brother
Hamlet Big Brother is the complete set consisting of Multi Handle (26''), 1/2'' cutter, edge protector and a 5/8'' straight stem.
Does not include reducing collets, side handle or hollowing gate, but these are available separately.
Hide Mallet Size 10
The head is 89mm (3.5'') in diameter, the length is 140mm (5.5'') and it is made of hide (see below). The total length is approximately 255mm (14'') long and the handle is wooden.
Ideal for the jewellery trade, sheet metal work, die cutting industry and use on copper, brass and soft metals.
This hide mallet has been manufactured from genuine Water Buffalo hide tightly...
Hock Carving Knives - Set of 5
The blades of these comfortable carving knives are made from Hock's high carbon steel, hardened to Rc62 (if that sounds familiar it's because that's the same steel and hardness as Hock's high-carbon knives and plane blades) easy to hone to the sharpest possible edge.
The lengths listed are an approximate blade length.
The set includes: 1" Carving Knife, 1¼" Carving Knife, 1" Chip Carver Knife,...
Lost Art Press Pocket Book Bundle
Get the information you need right at your fingertips with Lost Art Press pocket books – you can get all 4!
The 4 pocket books are:
''Woodworker's Pocket Book''
Edited by the great Charles H. Hayward and first published in 1949, ''Woodworker’s Pocket Book'' is a guide to everything from finishing recipes to drawing ellipses to choosing the correct...
Mortise & Tenon Magazine - Bundle of 5 Issues
Select your choice of 3 issues of Mortise & Tenon Magazine (excluding the 10th Anniversary Issue)
Note some of these issues will only be available while stocks last.
Details of the contents of each issue can be found on the individual product pages - view contents of each issue here
Nakaya Kataba Gold Saw
The Nakaya Kataba Gold is a well-balanced, relatively fine cross-cut saw. Kataba refers to the blade not having a spine, so is therefore able to perform deeper cuts when required. The blade will still track straight in the cut as the blade will be under tension when pulled.
Replaceable blade made from high-quality Japanese steel.
Cross-cut teeth.
Blade thickness: 0.4mm thick.
Tooth...
ProEdge Knife Sharpening Accessory Kit
The main jigs and belts required for sharpening you kitchen knives on the Robert Sorby ProEdge.
The Robert Sorby ProEdge Knife Sharpening Accessory Kit includes......
Raised Wear Platen/Back Plate
Universal Arm
Small Knife Holder with angle adjustment collar
Large Knife Holder with angle adjustment collar
Allen Key/Wrench
Aluminium Oxide Belt 60 grit x1
Aluminium Oxide Belt 240...
Robert Sorby Hollowmaster
The Robert Sorby Hollowmaster is the perfect complement to the Multi Tip Hollowing Tool. It uses the same unique design of a meaty 3/4" flat shank which when laid on the tool rest gives ample support to prevent the tool from being turned over by the rotation of the wood. You are not fighting the laws of nature, but removing wood with ease.
It's swan neck design means that the Hollowmaster...
Robert Sorby Pen Turning Set
The perfect pen turning tool set. All the tools needed to rough down the pen blank, clean up the ends and perfectly shape the finished pen.
Comprises 5/16" roughing gouge, 1/16" parting tool & 1/2" spindlemaster.
Rotur Deluxe Colleted Pen Turning Kit
The Rotur Deluxe Colleted Pen Turning Kit. This kit has been designed with the professional pen turner in mind, it has a unique colleted pen mandrel which only needs a quarter turn to clamp the shaft in place. Features a dust free collect which remains hidden.
The other parts supplied in this kit are: Spacers and Cones for assembly, Pen Blank Trimming Tool to square the ends of the blanks and 5...
Saburrtooth 1/4'' Cross Cutter - 1/2''
Shape: Cross Cut Eyecutter
Diameter: 1/2''
Head Length: 1/2
Saburrtooth 1/8'' Ball Nose - 1/8'' x 7/8''
Saburrtooth 1/8" ball nose available in extra fine, fine and coarse.
Head Diameter: 1/8"
Head Length: 7/8"
Saburrtooth 1/8'' Taper - 1/4'' x 1/2''
The Saburrtooth 1/8" Taper is a versatile carving tool designed for woodworkers.
With a head diameter of 1/4" and a head length of 1/2", it’s ideal for detailed carving and shaping tasks. Available in various grits (X Fine, Fine, Coarse), this tool provides excellent material removal while minimizing clogging. It’s perfect for creating fine details and smoothing surfaces...
Saburrtooth Supreme 1/4' Sphere 7/8' x 7/8'
Head Diameter: 7/8"
Head Length: 7/8"
Spare Blade for Lie-Nielsen No. 7 1/2 Low Angle Jointer
Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel.
2.300" wide x .240" thick
A2 cryogenically treated Tool Steel
![Veritas Metric Set Up Blocks - 9 piece set [Preowned, SOLD]](/images/products/thumbs/4256_11366.jpg "Veritas Metric Set Up Blocks - 9 piece set [Preowned, SOLD]")
![Veritas Metric Set Up Blocks - 9 piece set [Preowned, SOLD]](/images/products/thumbs/4256_11365.jpg "Veritas Metric Set Up Blocks - 9 piece set [Preowned, SOLD]")
![Veritas Side Rebate Plane [Preowned, SOLD]](/images/products/thumbs/3850_9739.jpg "Veritas Side Rebate Plane [Preowned, SOLD]")
![Veritas Side Rebate Plane [Preowned, SOLD]](/images/products/thumbs/3850_9737.jpg "Veritas Side Rebate Plane [Preowned, SOLD]")
