Best Selling

Auriou Ironing Rasps – 20mm wide - Unhandled [Clearance]

Auriou Ironing Rasps – 20mm wide - Unhandled [Clearance]

Old stock – unhandled – as new. Hand stitched by Auriou Toolworks, the masters of rasp and riffler making in St. Juery, France. These are flat bottomed short ironing rasps. The stitched part is 80mm long and 20mm wide. Stitched on the underside only with a cranked tang for knuckle clearance. Stitch is 6 which is coarse/medium cut. These are “old stock” and date...

£35.00 inc VAT

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]

Pre-owned in excellent condition with a branded plane sack. This description is from our main Lie-Nielsen section where this plane (without plane sack is normally available for £376 - but we are currently out of stock!) ''A versatile, general purpose shoulder plane with nice heft and the best size to start with. This all-metal shoulder plane is based on the Record 073, which in...

£295.00 inc VAT

Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]

Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]

Pre-owned – a commission sale 4, 5, 6, 7 ,8 & 10mm blades come with this plane which has been lightly used. Original packaging (the box is a bit tatty) and Instruction booklet. The condition of the plane and blades is Good ++ (G++) which indicates it is not new, but has been well cared for and has no defects over and above superficial cosmetic blemishes. “Closest in size...

£230.00 inc VAT

Lie-Nielsen SD-4 - Chipbreaker Screwdriver [Preowned, SOLD]

Chipbreaker screwdriver. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles) Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blades, numbered brass ferrule. The...

£42.00 inc VAT

Lie-Nielsen - Pair of 1/4'' Skew Chisels [Preowned, Unused, SOLD]

Lie-Nielsen - Pair of 1/4'' Skew Chisels [Preowned, Unused, SOLD]

A pair of 1/4'' skew chisels from Lie Nielsen Toolworks. Pre-owned. but unused. No box.

£250.00 inc VAT

Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]

Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]

A pair of 3/8'' skew chisels from Lie Nielsen Toolworks. Pre-owned. but unused. No box.

£250.00 inc VAT

David Barron - Attractive Brass Headed Hammer [Preowned, SOLD]

David Barron - Attractive Brass Headed Hammer [Preowned, SOLD]

205mm overall with oblong square faced head 60mm x 15mm x 15mm This has been used but is in G++ condition. The handle is gorgeous and made from rippled ash. It has BARRON stamped very clearly on the bulbous end.

£36.00 inc VAT

Woodpeckers - Rule Stop 2 [Preowned, As New, SOLD]

Woodpeckers - Rule Stop 2 [Preowned, As New, SOLD]

Pre-owned but unused, so as new. Simply take any ruler (or look at our Woodpeckers Friday Finds or Woodpeckers Section) and add this well engineered stop to help you repeat your accurate marking out. Selling in our Woodpecker Section for £52

£38.00 inc VAT

Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]

Pre-owned in excellent, unused condition This description is from our site where this plane (without plane sack is available for £245) ''This is the smallest of the Lie-Nielsen ''Preston style'' shoulder planes, 5/8'' wide, 5 3/4'' long. The blade is 0.140'' thick, and the tool weighs 1.35 lbs. With an adjustable mouth like its larger siblings,...

£195.00 inc VAT

Tite Mark Long Marking Gauge [Preowned, SOLD]

Tite Mark Long Marking Gauge [Preowned, SOLD]

Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...

£100.00 inc VAT

Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]

Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]

An unused set of 5 chisels in the branded Lie-Nielsen leather roll. 3/16'', 1/4'', 5/16'', 3/8'' & 1/2'' Pre-owned but not used.

£595.00 inc VAT

1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]

1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]

Very crisp set of 26 letters plus ampersand (&) plus numbers 0-9 These are unused and are in their original cases.

£36.00 inc VAT

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

Made by Wm. Marples, Sheffield This has a 9'' beech handle with a tapered auger that is stamped 1 1/4'' Wm Marples., Sheffield. It will clean up to G++ with little effort. No rust at all, the handle just needs a light clean with some wax and wire wool.

£24.00 inc VAT

Replacement Blade for Veritas Scraper Shave

This high-carbon steel replacement blade is 0.040'' thick and hardened to Rc48-52, with a 45° cutting edge that can be readily burnished to create a long-lasting hook. Made in Canada.

£13.75 inc VAT

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

This 3 volume set of Knight's American Mechanical Dictionaries and the single volume of Knight's New Mechanical Dictionary (Supplement) was reprinted jointly by The Mid-West Tool Collectors Association and The Early American Industries Association October 1979. It is written elsewhere that "This work has been selected by scholars as being culturally important, and is part of the knowledge...

£250.00 (VAT exempt)

Plough Plane Project [Preowned, SOLD]

So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...

£75.00 inc VAT

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Pre-owned but hardly used. This set of 7 includes the following sizes: 1/8'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'' & 5/8'' (note the correction to earlier description that listed 2 x 3/8" - our apologies for that but it was Fraser's fault as usual) The 5/16'' appears to have been sharpened once but the others are unused. The...

£665.00 inc VAT

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Here is a rare treat. The left hand version has been discontinued and the right handed plane in bronze has not been seen for a few years yet. The Lie-Nielsen No 140 Skew Block Plane is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A...

£1,200.00 inc VAT

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Pre-owned but hardly used at all. This Lie-Nielsen small chisel plane comes with a branded LN sack to keep it protected. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You...

£175.00 inc VAT

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Pre-owned but unused. This is what we say about it on our main site where this exact tool is available for £233 inc VAT "The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own. Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking...

£155.00 inc VAT

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Pre-owned but never used. The description in our Lie-Nielsen plane section says this... "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs. It is called a...

£295.00 inc VAT

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Pre-owned T-300 metric square made in the USA. Unused, as new. Edge markings to 320mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...

£84.00 inc VAT

Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]

Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]

Pre Loved

£325.00 inc VAT

Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]

Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]

Pre Loved

£335.00 inc VAT

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Pre Loved

£25.00 inc VAT

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

£36.00 inc VAT

Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

£45.00 inc VAT

Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]

Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]

Pre Loved

£125.00 (VAT exempt)

Lie Nielsen Toolworks - Fishtail Chisels [Preowned, SOLD]

Lie Nielsen Toolworks - Fishtail Chisels [Preowned, SOLD]

Sold

£300.00 inc VAT

Lie Nielsen Toolworks - Corner Chisels [Preowned, Unused, SOLD]

Sold

£350.00 inc VAT

Woodpeckers 300mm Centre/Standard Rule with end stop [Preowned, Unused, SOLD]

Sold

£36.00 inc VAT

Drawknife - Mike Abbott designed 8'' blade [Preowned, SOLD]

Sold

£48.00 inc VAT

JessEm Tool Company - Wood Sabre Marking Gauge (08803) [Preowned, Unused, SOLD]

Sold

£75.00 inc VAT

Richard Kell Wonder Bundle [Preowned, SOLD]

Sold

£100.00 inc VAT

Woodpeckers - 6'' Carpenters Combination Square [Preowned, Unused, SOLD]

Pre-owned, but the condition is ''as new''. The Woodpeckers 6'' Carpenters Square is a perfectly machined combination 90-degree and 45-degree with handles for a physical reference to the edge of the workpiece. The blade is machined from cast and ground aluminium tool plate. This expensive material is utilised for its mechanical stability and tendency to maintain close...

£50.00 inc VAT

Robert Sorby Small Ultima Hollowing Tool [Clearance, SOLD]

Robert Sorby Small Ultima Hollowing Tool [Clearance, SOLD]

Clearance

Was £145.00 Now £125.00 inc VAT

1'' (25mm) Blue Spruce Paring Chisel (with Resin Infused Figured Handle) [Preowned, Unused, SOLD]

1'' (25mm) Blue Spruce Paring Chisel (with Resin Infused Figured Handle) [Preowned, Unused, SOLD]

Beautiful and unused. We are unsure as to the handle species but it looks like walnut. The handle is a deeply figured brown with black streaks. 11 1/2" overall (the handle with the ferrule is 4 1/4"). Original packaging. This is a commission sale on behalf of a customer.

£105.00 (VAT exempt)

350mm Froe – Leonard Muller [Preowned, SOLD]

350mm Froe – Leonard Muller [Preowned, SOLD]

An ash handled monster for shingle making etc. This is shop soiled which shouldn’t bother you for a froe. 350mm edge with a hefty 9mm thick back. 400mm ash handle which is 35mm in diameter. This normally sell for £120 on our site. Treat yourself.

£84.00 inc VAT

5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]

5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]

4 of these gouges have matching London pattern boxwood handles (the smallest has a 1'' split near the brass ferrule). The shorter gouges are ½'', ¾'', 1'' & 1 ½'' wide with a medium sweep. The blade lengths vary from 4'' (100mm) – 5'' (125mm). The 5th gouge has a very slightly different London pattern boxwood...

£150.00 (VAT exempt)

African Blackwood & Curly Maple Mallet - Mappa Holland [Clearance, SOLD]

African Blackwood & Curly Maple Mallet - Mappa Holland [Clearance, SOLD]

This is an unused beauty from those clever Dutch boys Mappa Toolworks. Very similar to the Blue Spruce Tool works mallets and certainly as elegant and as functional. Resin infused head for durability and attractive blackwood head. The curly maple head is 65mm wide, 75mm deep and the mallet is 210mm tall. Original packaging.

£125.00 inc VAT

Bad Axe 14'' No.9 Precision Tenon Saw

The Bad Axe No. 9 Back Saw — a modern revival of the Disston No. 9, reimagined with the ergonomic 1874 Reagan patent handle and a distinctive ogee-curved, exposed toe at the toothline. Expertly engineered for tight, detail-oriented work, the No. 9 excels in spaces where a traditional sawback would be obstructive. Its exposed toe allows for exceptional maneuverability—ideal for deepening...

£340.00 inc VAT

Blade for Cast Round Spokeshave

Replacement PM-V11 blade to fit the Lee Valley Cast Round Spokeshave (15P1701).

£27.00 inc VAT

Bridge City Toolworks - Tri & Mitre Squares [Preowned, Unused, SOLD]

Bridge City Toolworks - Tri & Mitre Squares [Preowned, Unused, SOLD]

These are The Bridge City Tool Works ungraduated Made in China 2019 models. 5V2 Precision Try Square - This precision square is made of extremely stable and anodized aluminium, making it very robust. The handle consists of two symmetrical parts. Four screws secure the blade, which is slightly rounded at the corners. Made to a tolerance of 0.01 mm per 100 mm. There is a triangular cut-out in the...

£80.00 (VAT exempt)

Clifton Convex Spokeshave – No.550 [Preowned, SOLD]

Clifton Convex Spokeshave – No.550 [Preowned, SOLD]

Pre-owned – some minor wear and cosmetic markings. G++ condition. A commission sale. Clifton spokeshaves (UK) are made from virtually unbreakable spheroidal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The...

£100.00 (VAT exempt)

Clifton No.3 - Smoothing Plane [Preowned, SOLD]

Clifton No.3 - Smoothing Plane [Preowned, SOLD]

Pre-owned, a commission sale. This plane has seen little use and is in G++ condition with original box and packaging. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment...

£245.00 (VAT exempt)

Da Vinci Bicycle

The Leonardo Bicycle has an interesting and controversial history. The design itself would have been incredibly groundbreaking for the time, no inventor/engineer during that era had even considered a personal vehicle – of any kind (well, maybe a horse). A bicycle design was not seen until the 1800’s – over 300 years later! It is widely accepted that the image was not drawn by Leonardo,...

£16.50 inc VAT