Brand
Collection
Price
Additional Filters
260 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Clifton Combination Plane [Pre-owned, As New, SOLD]Clifton Combination Plane [Pre-owned, As New, SOLD]
Sold
Clifton Combination Plane [Pre-owned, As New, SOLD]
The last one of these we sold was snapped up quickly last month. This is as good, if not better. Unused, in original box.
£295.00 inc VAT
Record No.8 Jointer Plane [Pre-owned, SOLD]Record No.8 Jointer Plane [Pre-owned, SOLD]
Sold
Record No.8 Jointer Plane [Pre-owned, SOLD]
 A beast of a plane!
£185.00 inc VAT
Ashley Iles Bowl Carving Gouge - 2" x No.18 [Pre-owned, SOLD]Ashley Iles Bowl Carving Gouge - 2" x No.18 [Pre-owned, SOLD]
Sold
Ashley Iles Bowl Carving Gouge - 2" x No.18 [Pre-owned, SOLD]
Designed for quick stock removal deep down in a large bowl. Allongee pattern, this means the blade tapers outwards from the shoulder to the cutting edge. The cutting edge is 50mm (2") corner to corner, the bevel is ground to 25 degrees with a large no.18 sweep. Total length is 305mm (12"). This massive gouge has a beech handle 150mm (6") long with brass ferule. Out-cannel...
£66.00 inc VAT
Svante Djary 2” 600g Adze [Pre-owned, SOLD]Svante Djary 2” 600g Adze [Pre-owned, SOLD]
Sold
Svante Djary 2” 600g Adze [Pre-owned, SOLD]
This small adze (which is not unlike the slightly heftier Oscar Rush version) is from Swedish blacksmiths Svante Djarv Hantverk and has the stamp SD in the head. Professionally hand-crafted in Sweden from high carbon steel, this small carving adze has a lovely short, shaped handle allowing for a good, safe grip whilst carving. Designed for shaping the insides of wood carvings, kuksa, bowls and...
£180.00 inc VAT
Record 405 Multi-Plane [Pre-owned, As New, SOLD]Record 405 Multi-Plane [Pre-owned, As New, SOLD]
Sold
Record 405 Multi-Plane [Pre-owned, As New, SOLD]
Unused!
£225.00 inc VAT
Stanley No.113 Circular Plane [Vintage, SOLD]Stanley No.113 Circular Plane [Vintage, SOLD]
Sold
Stanley No.113 Circular Plane [Vintage, SOLD]
STanley Rule & Level Co.
£115.00 inc VAT
Stanley No.71 Router Plane [Pre-owned, SOLD]Stanley No.71 Router Plane [Pre-owned, SOLD]
Sold
Stanley No.71 Router Plane [Pre-owned, SOLD]
The body of this router plane is in as new condition. 3 cutters (which have been cleaned), curved/straight reversible fence. Original cardboard box. This a fairly recent model with black stained beech handles..
£100.00 inc VAT
1/2” Mortise Chisel – Marples [Pre-owned, SOLD]1/2” Mortise Chisel – Marples [Pre-owned, SOLD]
Sold
1/2” Mortise Chisel – Marples [Pre-owned, SOLD]
15” overall with lovely boxwood handle. In great condition. You are unlikley to source a better example of this tool.
£30.00 inc VAT
Moore & Wright Combination Square [Pre-owned, SOLD]Moore & Wright Combination Square [Pre-owned, SOLD]
Sold
Moore & Wright Combination Square [Pre-owned, SOLD]
All in good working order. Scribe and vials in good order. Clear marks. Imperial & Metric makings up to 12” – 300mm
£85.00 inc VAT
Lie Nielsen Toolworks – No.212 Scraper Plane Toothing Irons [Clearance, As New, SOLD]Lie Nielsen Toolworks – No.212 Scraper Plane Toothing Irons [Clearance, As New, SOLD]
Sold
Lie Nielsen Toolworks – No.212 Scraper Plane Toothing Irons [Clearance, As New, SOLD]
18tpi & 25tpi toothing blades (irons) Still in their original rust proof packaging and dated 2014 You are buying 2 blades for a Lie Nielsen 212 scraper plane..
£95.00 inc VAT
Lie Nielsen Toolworks – No.212 Scraper Plane Toothing Iron [Clearance, As New, SOLD]
Sold
Lie Nielsen Toolworks – No.212 Scraper Plane Toothing Iron [Clearance, As New, SOLD]
18tpi toothing blade for a LN 212 Still in original rust proof packaging. You are buying a single blade. Old stock - as new.
£50.00 inc VAT
Lie Nielsen Toolworks – 15tpi Toothed Blade for No.4 or No.5 [Clearance, As New, SOLD]Lie Nielsen Toolworks – 15tpi Toothed Blade for No.4 or No.5 [Clearance, As New, SOLD]
Sold
Lie Nielsen Toolworks – 15tpi Toothed Blade for No.4 or No.5 [Clearance, As New, SOLD]
Original rust proof packaging – as new. 2” wide. 15TPI toothing blade - Lie-Nielsen Toolworks.
£60.00 inc VAT
Lie Nielsen Toolworks – Replacement blade for a No.2 Plane [Clearance, As New, SOLD]Lie Nielsen Toolworks – Replacement blade for a No.2 Plane [Clearance, As New, SOLD]
Sold
Lie Nielsen Toolworks – Replacement blade for a No.2 Plane [Clearance, As New, SOLD]
Original rust proof packaging – as new. 1 5/8” wide. This is for a Lie-Nielsen No.2 smoothing plane.
£50.00 inc VAT
Lie Nielsen Toolworks – Replacement blade for a No.9 Mitre Plane [Clearance, As New, SOLD]Lie Nielsen Toolworks – Replacement blade for a No.9 Mitre Plane [Clearance, As New, SOLD]
Sold
Lie Nielsen Toolworks – Replacement blade for a No.9 Mitre Plane [Clearance, As New, SOLD]
Original rust proof packaging – as new. Lie-Nielsen Toolworks blade for a No.9 Mitre Plane
£85.00 inc VAT
Steel Letter Stamps – 3/16” [Pre-owned, SOLD]Steel Letter Stamps – 3/16” [Pre-owned, SOLD]
Sold
Steel Letter Stamps – 3/16” [Pre-owned, SOLD]
In original metal case. Made in England. Crisp! About 2 ½” long.
£25.00 inc VAT
Ray Iles Inshave [Pre-owned, SOLD]Ray Iles Inshave [Pre-owned, SOLD]
Sold
Ray Iles Inshave [Pre-owned, SOLD]
The Ray Iles Inshave (scorp) has steamed beech handles with brass ferrules. This tool is basically a semi-circular drawknife with an 8" blade. Pre-owned nut little used, this inshave has a few superficial blemish marks consistent with very light use. The edge is clean and sharp. Available new for £75
£50.00 inc VAT
12 Pfeil Carving Tools in Roll [Pre-owned, Great Condition, SOLD]12 Pfeil Carving Tools in Roll [Pre-owned, Great Condition, SOLD]
Sold
12 Pfeil Carving Tools in Roll [Pre-owned, Great Condition, SOLD]
Save £115 on brand new prices!
£244.00 inc VAT
A lovely upholsterers strapped hammer [Vintage, SOLD]A lovely upholsterers strapped hammer [Vintage, SOLD]
Sold
A lovely upholsterers strapped hammer [Vintage, SOLD]
12 1/2” overall with 4 ¼” strap. The head is 5 1/4” wide with a ½” round face with a flat claw pane. Oak handle A beautifully balanced hammer designed for nailing leather and cloth to furnitures and for saddlery.
£35.00 inc VAT
A nicely refurbished 1 ½” bevel edged paring chisel – Mawhood, Sheffield [Vintage, SOLD]A nicely refurbished 1 ½” bevel edged paring chisel – Mawhood, Sheffield [Vintage, SOLD]
Sold
A nicely refurbished 1 ½” bevel edged paring chisel – Mawhood, Sheffield [Vintage, SOLD]
15” overall Lovely handle with brass ferrule. Mawhood Bothers produced fine edge tools in Sheffield up to about 1980. Their Palm Tree brand has the distinctive stamp of a plam tree in this chisel body.
£44.00 inc VAT
Stanley 79 Double-sided Rebate Plane [Pre-owned, SOLD]Stanley 79 Double-sided Rebate Plane [Pre-owned, SOLD]
Sold
Stanley 79 Double-sided Rebate Plane [Pre-owned, SOLD]
In superb condition. This also has an owner made bespoke wooden base to keep it safely housed. The best example of thus plane we have seen.
£75.00 inc VAT
Stanley 78 Rebate plane [Pre-owned, SOLD]Stanley 78 Rebate plane [Pre-owned, SOLD]
Sold
Stanley 78 Rebate plane [Pre-owned, SOLD]
Unused in original cardboard box.
£45.00 inc VAT
GTL Smoothing Plane [Pre-owned, SOLD]GTL Smoothing Plane [Pre-owned, SOLD]
Sold
GTL Smoothing Plane [Pre-owned, SOLD]
This is a Smoothing Plane with brass body and beech handles. 2" wide blade. In very good condition.
£35.00 inc VAT
Elwell Hand Hatchet – 1 1/2 lbs head [Pre-owned, SOLD]Elwell Hand Hatchet – 1 1/2 lbs head [Pre-owned, SOLD]
Sold
Elwell Hand Hatchet – 1 1/2 lbs head [Pre-owned, SOLD]
An Elwell British Classic!
£45.00 inc VAT
Stanley No.50 Plow Plane [Pre-owned, As New, SOLD]Stanley No.50 Plow Plane [Pre-owned, As New, SOLD]
Sold
Stanley No.50 Plow Plane [Pre-owned, As New, SOLD]
Almost perfect condition. Unused in original box with cutters.
£75.00 inc VAT
Stanley No.8 Hollow & Round bases with cutters for combination plane [Pre-owned, SOLD]Stanley No.8 Hollow & Round bases with cutters for combination plane [Pre-owned, SOLD]
Sold
Stanley No.8 Hollow & Round bases with cutters for combination plane [Pre-owned, SOLD]
These are not so easy to come across in such good condition. Designed to fit the Stanley 45 & 55 Combination planes.
£60.00 inc VAT
Rabone Chesterman Engineers Spirit Level on hardwood base [Vintage, SOLD]Rabone Chesterman Engineers Spirit Level on hardwood base [Vintage, SOLD]
Sold
Rabone Chesterman Engineers Spirit Level on hardwood base [Vintage, SOLD]
12 “ long by 1 ½” wide by 2 ½”high (without the wooden base) this all metal engineers’ level is an impressive ornament for your desk if nothing else. Its main horizontal vial has a brass cover that rotates to protect the bubble which is in perfect working order. The brass cover elevates this level somewhat in terms of its attractiveness. The small lateral...
£66.00 inc VAT
Stanley No.10 Rebate Plane [Pre-owned, SOLD]Stanley No.10 Rebate Plane [Pre-owned, SOLD]
Sold
Stanley No.10 Rebate Plane [Pre-owned, SOLD]
Popular with timber framers and the like. This plane is ready to work. Stanley England. Original iron. Very good condition with slight chip at corner of the mouth 1/16” (1.5mm). Priced to sell quickly!
£65.00 inc VAT
Edward Preston Bullnose Plane [Pre-owned, SOLD]Edward Preston Bullnose Plane [Pre-owned, SOLD]
Sold
Edward Preston Bullnose Plane [Pre-owned, SOLD]
Edward Preston Bullnose Rebate Plane Manufactured:From 1933 to 1994 Length:4 inches Weight:1-1/4 pounds Cutter Width:1-1/8 inches Construction:Cast iron body. Tungsten steel cutter This has the detachable front piece which means you can convert this to a chisel plane if required. Original good iron with plenty of life left (5/8”) Good square mouth.
£54.00 inc VAT
Record Bullnose No.077A [Pre-owned, SOLD]Record Bullnose No.077A [Pre-owned, SOLD]
Sold
Record Bullnose No.077A [Pre-owned, SOLD]
In excellent condition G++ - Fine Full iron. Super clean.
£66.00 inc VAT
Record No10H & No10R Special Bases with cutters for Record No.405 [Pre-owned, SOLD]Record No10H & No10R Special Bases with cutters for Record No.405 [Pre-owned, SOLD]
Sold
Record No10H & No10R Special Bases with cutters for Record No.405 [Pre-owned, SOLD]
Special bases were available for the Record No. 405 Multi-Plane: A Hollow and its cutter would form a round, and a Round and its cutter would form a hollow. Hollows and Rounds were sold in sets, comprising 1 Hollow, 1 Round and 2 cutters. No. 6 Hollow and Round – 1/2 inch cutter width – works circles of 3/4 inch No. 8 Hollow and Round – 5/8 inch cutter width – works...
£75.00 inc VAT
Edward Preston Large Shoulder Plane [Pre-owned, SOLD]Edward Preston Large Shoulder Plane [Pre-owned, SOLD]
Sold
Edward Preston Large Shoulder Plane [Pre-owned, SOLD]
In super working order, this heavy-duty shoulder plane has good life left in the iron. 1 ¼” wide and 8 1/4” long. Good mouth. You can read all about Preston Shoulder planes at Preston Tool Reviews website An excellent alternative to the current new offerings by Lie Nielsen, Veritas & Clifton. A good percentage of the original nickel plating has worn due to use.
£125.00 inc VAT
Stanley Bedrock No.7 Jointer Plane [Vintage, SOLD]Stanley Bedrock No.7 Jointer Plane [Vintage, SOLD]
Sold
Stanley Bedrock No.7 Jointer Plane [Vintage, SOLD]
22” square sided Stanley Bedrock Jointer plane for finishing large surfaces and for trueing up the edges of boards so that they can be closely fitted or joined together. Markings as follows Bedrock is cast into the plane body ahead of the front knob. Bedrock is cast into the cap iron. No 607 (at rear of plane) and just behind the frog themselves is in the casting PATD APR 2...
£195.00 inc VAT
Record 042 Shoulder plane [Pre-owned, SOLD]Record 042 Shoulder plane [Pre-owned, SOLD]
Sold
Record 042 Shoulder plane [Pre-owned, SOLD]
 Excellent 19mm wide Record Shoulder Plane
£104.00 inc VAT
A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned, SOLD]A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned, SOLD]
Sold
A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned, SOLD]
24” long with 2 5/8” wide original (thin) cutter with 1 1/2” life left before you need to invest in a replacement blade (we sell these!) A very good example of this jointer plane with original rosewood handle and front knob in very good condition. Production of this plane stopped in 1958 and we think this is a type 14 which dates it to 1939-1940. At over 85 years old, this super...
£195.00 inc VAT
A 2” wide firmer chisel by Mathieson – Glasgow [Vintage, SOLD]A 2” wide firmer chisel by Mathieson – Glasgow [Vintage, SOLD]
Sold
A 2” wide firmer chisel by Mathieson – Glasgow [Vintage, SOLD]
Warranted cast steel. Steel hooped oak handled firmer chisel by famous Scottish maker Mathieson (note – take care with the hoop and it has an edge caused by being struck repeatedly which requires a bit of rounding off, a 3 minute job) 12 ½” overall. Blade life is 4”
£42.00 inc VAT
Record 405 Multi Plane [Vintage, SOLD]Record 405 Multi Plane [Vintage, SOLD]
Sold
Record 405 Multi Plane [Vintage, SOLD]
A little used Record 405 in its original box, complete with a full set of cutters and instruction booklet. This Record Planes online resource is a great place to look and learn about this plane. Note this plane comes with 23 standard cutters. 11 plough and dado cutters 2 match cutters 1 sash cutter 1 slitting cutter 1 fillister cutter 7 beading cutters In original fitted...
£175.00 inc VAT
Marples Lock Mortise Chisel [Vintage, SOLD]Marples Lock Mortise Chisel [Vintage, SOLD]
Sold
Marples Lock Mortise Chisel [Vintage, SOLD]
18” overall length with stubby 4 “ handle. All in great order. A steal!
£28.00 inc VAT
J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage, SOLD]J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage, SOLD]
Sold
J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage, SOLD]
An attractive steel and brass level with 3 good clear working vials. The japanning (the black paint) is in excellent order – a nice decorative and functional tool..
£60.00 inc VAT
W.Marples & Sons 2” wide bevel edge chisel [Vintage, SOLD]W.Marples & Sons 2” wide bevel edge chisel [Vintage, SOLD]
Sold
W.Marples & Sons 2” wide bevel edge chisel [Vintage, SOLD]
12 1/2” overall this is a lovely chisel that has a hefty hardwood handle. There is over 4“ of blade left to wear out (good luck with that!) In very good condition, no pitting, good clean edge. Small split to brass ferrule but the ferrule will hold.
£38.00 inc VAT
Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]
Sold
Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]
This is in very good order with original Stanley iron. The sole moves adjust freely. There is a small indent at one edge of the sole (very small indeed but we do try to be very accurate in our descriptions). This indent (1mm) is outside the edge of the planning track and we do not think this would affect performance.
£125.00 inc VAT
1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]
Sold
1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]
As good as you’ll get if you want an old-style oval handles mortise chisel. This bad boy hasn’t done any work we think.
£30.00 inc VAT
6 Pattermakers gouges [Vintage, SOLD]6 Pattermakers gouges [Vintage, SOLD]
Sold
6 Pattermakers gouges [Vintage, SOLD]
These are well looked after patternmakers cranked paring gouges. Different makers and non-matching handles. These came from a pattern maker in the West Midlands area of England. A pattern maker is often referred to as the “king of trades” and whenever we get hold of pattern makers hand tools they are generally in very good condition, as is the case here. 12” “ to 16“...
£66.00 inc VAT
Record 071 Router Plane [Pre-owned, SOLD]Record 071 Router Plane [Pre-owned, SOLD]
Sold
Record 071 Router Plane [Pre-owned, SOLD]
Complete with 3 cutters, depth stop and fence.
£105.00 inc VAT
Norris A5 Smoothing Plane – original box [Vintage, SOLD]Norris A5 Smoothing Plane – original box [Vintage, SOLD]
Sold
Norris A5 Smoothing Plane – original box [Vintage, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£425.00 (VAT exempt)
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]
Sold
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]
Sold
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]
Sold
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£480.00 inc VAT
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Sold
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Attractive French Walnut handles for chisels, rasps etc. 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.
£35.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 |