Best Selling

Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]

Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]

A pair of 3/8'' skew chisels from Lie Nielsen Toolworks. Pre-owned. but unused. No box.

USD $280.39 excl tax, duties and fees

David Barron - Attractive Brass Headed Hammer [Preowned, SOLD]

David Barron - Attractive Brass Headed Hammer [Preowned, SOLD]

205mm overall with oblong square faced head 60mm x 15mm x 15mm This has been used but is in G++ condition. The handle is gorgeous and made from rippled ash. It has BARRON stamped very clearly on the bulbous end.

USD $40.38 excl tax, duties and fees

Woodpeckers - Rule Stop 2 [Preowned, As New, SOLD]

Woodpeckers - Rule Stop 2 [Preowned, As New, SOLD]

Pre-owned but unused, so as new. Simply take any ruler (or look at our Woodpeckers Friday Finds or Woodpeckers Section) and add this well engineered stop to help you repeat your accurate marking out. Selling in our Woodpecker Section for £52

USD $42.62 excl tax, duties and fees

Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]

Pre-owned in excellent, unused condition This description is from our site where this plane (without plane sack is available for £245) ''This is the smallest of the Lie-Nielsen ''Preston style'' shoulder planes, 5/8'' wide, 5 3/4'' long. The blade is 0.140'' thick, and the tool weighs 1.35 lbs. With an adjustable mouth like its larger siblings,...

USD $218.71 excl tax, duties and fees

Tite Mark Long Marking Gauge [Preowned, SOLD]

Tite Mark Long Marking Gauge [Preowned, SOLD]

Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...

USD $112.16 excl tax, duties and fees

Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]

Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]

An unused set of 5 chisels in the branded Lie-Nielsen leather roll. 3/16'', 1/4'', 5/16'', 3/8'' & 1/2'' Pre-owned but not used.

USD $667.34 excl tax, duties and fees

1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]

1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]

Very crisp set of 26 letters plus ampersand (&) plus numbers 0-9 These are unused and are in their original cases.

USD $40.38 excl tax, duties and fees

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

Made by Wm. Marples, Sheffield This has a 9'' beech handle with a tapered auger that is stamped 1 1/4'' Wm Marples., Sheffield. It will clean up to G++ with little effort. No rust at all, the handle just needs a light clean with some wax and wire wool.

USD $26.92 excl tax, duties and fees

Replacement Blade for Veritas Scraper Shave

This high-carbon steel replacement blade is 0.040'' thick and hardened to Rc48-52, with a 45° cutting edge that can be readily burnished to create a long-lasting hook. Made in Canada.

USD $15.42 excl tax, duties and fees

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

This 3 volume set of Knight's American Mechanical Dictionaries and the single volume of Knight's New Mechanical Dictionary (Supplement) was reprinted jointly by The Mid-West Tool Collectors Association and The Early American Industries Association October 1979. It is written elsewhere that "This work has been selected by scholars as being culturally important, and is part of the knowledge...

USD $336.47 excl tax, duties and fees

Plough Plane Project [Preowned, SOLD]

So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...

USD $84.12 excl tax, duties and fees

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Pre-owned but hardly used. This set of 7 includes the following sizes: 1/8'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'' & 5/8'' (note the correction to earlier description that listed 2 x 3/8" - our apologies for that but it was Fraser's fault as usual) The 5/16'' appears to have been sharpened once but the others are unused. The...

USD $745.85 excl tax, duties and fees

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Here is a rare treat. The left hand version has been discontinued and the right handed plane in bronze has not been seen for a few years yet. The Lie-Nielsen No 140 Skew Block Plane is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A...

USD $1,345.89 excl tax, duties and fees

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Pre-owned but hardly used at all. This Lie-Nielsen small chisel plane comes with a branded LN sack to keep it protected. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You...

USD $196.28 excl tax, duties and fees

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Pre-owned but unused. This is what we say about it on our main site where this exact tool is available for £233 inc VAT "The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own. Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking...

USD $173.84 excl tax, duties and fees

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Pre-owned but never used. The description in our Lie-Nielsen plane section says this... "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs. It is called a...

USD $330.86 excl tax, duties and fees

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Pre-owned T-300 metric square made in the USA. Unused, as new. Edge markings to 320mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...

USD $94.21 excl tax, duties and fees

Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]

Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]

Pre Loved

USD $364.51 excl tax, duties and fees

Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]

Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]

Pre Loved

USD $375.73 excl tax, duties and fees

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Pre Loved

USD $28.04 excl tax, duties and fees

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

USD $40.38 excl tax, duties and fees

Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

USD $50.47 excl tax, duties and fees

Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]

Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]

Pre Loved

USD $168.24 excl tax, duties and fees

Lie Nielsen Toolworks - Fishtail Chisels [Preowned, SOLD]

Lie Nielsen Toolworks - Fishtail Chisels [Preowned, SOLD]

Sold

USD $336.47 excl tax, duties and fees

Lie Nielsen Toolworks - Corner Chisels [Preowned, Unused, SOLD]

Sold

USD $392.55 excl tax, duties and fees

Woodpeckers 300mm Centre/Standard Rule with end stop [Preowned, Unused, SOLD]

Sold

USD $40.38 excl tax, duties and fees

Drawknife - Mike Abbott designed 8'' blade [Preowned, SOLD]

Sold

USD $53.84 excl tax, duties and fees

JessEm Tool Company - Wood Sabre Marking Gauge (08803) [Preowned, Unused, SOLD]

Sold

USD $84.12 excl tax, duties and fees

Richard Kell Wonder Bundle [Preowned, SOLD]

Sold

USD $112.16 excl tax, duties and fees

Woodpeckers - 6'' Carpenters Combination Square [Preowned, Unused, SOLD]

Pre-owned, but the condition is ''as new''. The Woodpeckers 6'' Carpenters Square is a perfectly machined combination 90-degree and 45-degree with handles for a physical reference to the edge of the workpiece. The blade is machined from cast and ground aluminium tool plate. This expensive material is utilised for its mechanical stability and tendency to maintain close...

USD $56.08 excl tax, duties and fees

Robert Sorby Small Ultima Hollowing Tool [Clearance, SOLD]

Robert Sorby Small Ultima Hollowing Tool [Clearance, SOLD]

Clearance

Was $195.15 Now USD $168.24 excl tax, duties and fees

1'' (25mm) Blue Spruce Paring Chisel (with Resin Infused Figured Handle) [Preowned, Unused, SOLD]

1'' (25mm) Blue Spruce Paring Chisel (with Resin Infused Figured Handle) [Preowned, Unused, SOLD]

Beautiful and unused. We are unsure as to the handle species but it looks like walnut. The handle is a deeply figured brown with black streaks. 11 1/2" overall (the handle with the ferrule is 4 1/4"). Original packaging. This is a commission sale on behalf of a customer.

USD $141.32 excl tax, duties and fees

350mm Froe – Leonard Muller [Preowned, SOLD]

350mm Froe – Leonard Muller [Preowned, SOLD]

An ash handled monster for shingle making etc. This is shop soiled which shouldn’t bother you for a froe. 350mm edge with a hefty 9mm thick back. 400mm ash handle which is 35mm in diameter. This normally sell for £120 on our site. Treat yourself.

USD $94.21 excl tax, duties and fees

5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]

5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]

4 of these gouges have matching London pattern boxwood handles (the smallest has a 1'' split near the brass ferrule). The shorter gouges are ½'', ¾'', 1'' & 1 ½'' wide with a medium sweep. The blade lengths vary from 4'' (100mm) – 5'' (125mm). The 5th gouge has a very slightly different London pattern boxwood...

USD $201.88 excl tax, duties and fees

Bad Axe 14'' No.9 Precision Tenon Saw

The Bad Axe No. 9 Back Saw — a modern revival of the Disston No. 9, reimagined with the ergonomic 1874 Reagan patent handle and a distinctive ogee-curved, exposed toe at the toothline. Expertly engineered for tight, detail-oriented work, the No. 9 excels in spaces where a traditional sawback would be obstructive. Its exposed toe allows for exceptional maneuverability—ideal for deepening...

USD $381.33 excl tax, duties and fees

Blade for Cast Round Spokeshave

Replacement PM-V11 blade to fit the Lee Valley Cast Round Spokeshave (15P1701).

USD $30.28 excl tax, duties and fees

Bridge City Toolworks - Tri & Mitre Squares [Preowned, Unused, SOLD]

Bridge City Toolworks - Tri & Mitre Squares [Preowned, Unused, SOLD]

These are The Bridge City Tool Works ungraduated Made in China 2019 models. 5V2 Precision Try Square - This precision square is made of extremely stable and anodized aluminium, making it very robust. The handle consists of two symmetrical parts. Four screws secure the blade, which is slightly rounded at the corners. Made to a tolerance of 0.01 mm per 100 mm. There is a triangular cut-out in the...

USD $107.67 excl tax, duties and fees

Cherry Woodturning Blank Bundle

Planed all round English cherry blanks suitable for turning or carving. This bundle includes the following.. 6'' x 6'' x 1 1/2'' (150mm x 150mm x 38mm) Blank x 1 7'' x 7'' x 1 1/2'' (175mm x 175mm x 38mm) Blank x 1 8'' x 8'' x 1/2'' (200mm x 200mm x 38mm) Blank x 1

USD $22.43 excl tax, duties and fees

Clifton Convex Spokeshave – No.550 [Preowned, SOLD]

Clifton Convex Spokeshave – No.550 [Preowned, SOLD]

Pre-owned – some minor wear and cosmetic markings. G++ condition. A commission sale. Clifton spokeshaves (UK) are made from virtually unbreakable spheroidal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The...

USD $134.59 excl tax, duties and fees

Clifton No.3 - Smoothing Plane [Preowned, SOLD]

Clifton No.3 - Smoothing Plane [Preowned, SOLD]

Pre-owned, a commission sale. This plane has seen little use and is in G++ condition with original box and packaging. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment...

USD $329.74 excl tax, duties and fees

Da Vinci Bicycle

The Leonardo Bicycle has an interesting and controversial history. The design itself would have been incredibly groundbreaking for the time, no inventor/engineer during that era had even considered a personal vehicle – of any kind (well, maybe a horse). A bicycle design was not seen until the 1800’s – over 300 years later! It is widely accepted that the image was not drawn by Leonardo,...

USD $18.51 excl tax, duties and fees

Flexcut 19 Pocket Tool Roll SK200

Keep all your Flexcut tools in one convenient tool roll. Fits 18 unhandled gouges and 1 handle. Note the tools are not included.

USD $34.49 excl tax, duties and fees

Gifkins H20 Dovetail Jig Template Upgrade Kit

The H20 template cuts the same sized dovetail joint as the H10 template. The significant difference is a greater distance between pins. The H10 cutters are used with this template. Timber thickness range: 2mm to 10mm. Pin Size 6mm. Pin Spacing 26mm. Min material thickness 2mm. Max material thickness 10mm. Max width 290mm. This kit includes the template, both cutters and spare backing...

USD $229.92 excl tax, duties and fees

Hamlet Round Side Cutting Scraper

These Hamlet scrapers are used to finish the insides and bottoms of objects as they are able to cut where conventional tools cannot reach. This 3/4'' Round Side Cutting Scraper has a 10'' handle.

USD $46.49 excl tax, duties and fees

Henry Taylor Chris Stott Hollowing Tool

This Henry Taylor Hollowing Tool has been designed personally by Chris Stott. These tools are ideal for turning small hollow forms up to 4'' in depth or diameter. The bent scraper works perfectly on curved areas, including tight areas around the neck of the opening. This hollowing tool is 3/8'' in size. Handle length is 10''

USD $48.68 excl tax, duties and fees

Kirjes Detailed Sanding & Polishing Kit

The Kirjes Detailed Sanding & Polishing Kit is the ultimate solution for fine sanding and polishing tasks, designed for use with the KJ120 and KJ130 drums. This comprehensive kit includes sanding sleeves for waxing and polishing, a hand pump, a cleaning stick, and wax. It provides everything you need to achieve a smooth, polished finish on your woodworking projects, making it an essential addition...

USD $95.33 excl tax, duties and fees

Lie-Nielsen Drawer Lock Chisel Pair

Chris Becksvoort came to Lie-Nielsen with this greatly improved design for a traditional tool. This special pair of chisels is indispensable for cutting small mortises in tight places - such as setting a drawer lock into a piece of furniture. A2 Tool Steel, precision ground. Blade widths are 1/2'' and 1/4''. Blade length is 1'', with a cutting depth of 11/16'' on...

USD $151.41 excl tax, duties and fees

Lie-Nielsen Mortise Chisels - Set of 5 with Leather Roll [Preowned, Unused, SOLD]

Lie-Nielsen Mortise Chisels - Set of 5 with Leather Roll [Preowned, Unused, SOLD]

Over £750 pounds worth selling for a great price - we can't belive these haven't been snapped up! These mortise chisels are pre-owned but unused. A Lie-Nielsen branded 7 pocket tool roll houses these 5 unused Lie-Nielsen mortise chisels. The tool roll has a few minor cosmetic small stains which will clean off (no tears, rips or damage). Chisels sizes - 3/16'', 1/4'',...

USD $800.80 excl tax, duties and fees

Recently viewed

Classic Hand Tools

Customer Service

Best Selling

Category

Brand

Collection

Price

Additional Filters

Sort By

Per Page

View

Recently viewed