Best Selling

TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]

TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]

Blue steel cutting edge made of Tasai special blue steel, a custom made steel for master blacksmith Tasai which is laminated onto the special multi-layer core ''Mokume pattern'' The handle is made of sandalwood (and still has its protective film covering it which we have decided not to remove to allow you the privilege. However the photo will show a glaze rather than the true colour of the handle). We...

£235.00 (VAT exempt)

Lie-Nielsen Low Angle Jack Plane - LN 62 (with additional toothing blade) [Preowned, Unused, SOLD]

Lie-Nielsen Low Angle Jack Plane - LN 62 (with additional toothing blade) [Preowned, Unused, SOLD]

This is a commission sale and in his notes our customer has advised that this plane has had very little use at all. Well, as the plane is still in its undisturbed paper wrapping within its blue sealed bag and original box, we respectfully disagree. This plane has yet to see the light of day and it is unused! Also comes with an unused toothing plane blade (Toothed blades have small chisel-like teeth...

£350.00 (VAT exempt)

Woodpeckers T-Square 600mm

Woodpeckers T-Square Metric 600mm with Rack-It Striking lines parallel with the edge of your stock is made easy with the Woodpeckers Precision T-Square. The beam has a lip that rests on the top surface of your stock, preventing the tool from rolling like many T-Squares. Precision machined scribing guides are spaced every milimetre down the length of the blade. This allows you tro drop the point...

£209.95 inc VAT

Crown Tools Revolution Brass Collet

Crown Tools Revolution Brass Collet available in 2 sizes 3/8'' (10mm) and 1/2'' (13mm)

£29.15 inc VAT

view options

Incra Stainless Steel Metric Rule Set [Preowned]

Incra Stainless Steel Metric Rule Set [Preowned]

300mm, 150mm & 75mm long. These super slim Incra rules are extremely precise measuring aids as they have holes for precise marking allowing accuracy to 0.25mm In almost new condition. You’ll need a 0.5mm diameter lead in your pencil to fit the holes.

£30.00 inc VAT

Gyokucho 664 Ryoba 300mm + Spare Blade

The Gyokucho 664 Ryoba 300mm TPE (rubber) handle with a spare blade.

£52.50 inc VAT

view bundle

Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]

Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]

These have been very little used and show no sign of wear. The original grinding marks are still on show. The set graduates from 1/8" through to 2" as follows. 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2" & 2" Most of them have their edge guards. Brass ferrules (one has split) Boxwood handles. Commission sale.

£245.00 (VAT exempt)

Flexcut Deluxe Palm Set FR405

This Flexcut set is a combination of the FR310 and FR404 palm sets. The regular palm for detail and the wide format for roughing-out makes this a great collection in one convenient box. Palm Tools included: FR308 #2 x 5/16', FR305 #3 x 3/8', FR400 #3 x 5/8', FR401 #5 x 9/16', FR306 #6 x 5/16', FR402 #8 x 3/8', FR309 #11 x 1/8', FR307 70 deg. x 1/4', FR403 70 deg. x 3/8'.

£206.00 inc VAT

Flexcut Radius Knife KN36

The Flexcut Radius Knife has a curved bevel and blade for making push cuts, slice cuts and V-shaped cuts. The skewed curvature of the bevel allows for a rolling action and a different approach. The handle shape holds like a pencil or conventional knife.

£41.95 inc VAT

Auriou Ironing Rasps – 15mm wide - Unhandled [Clearance, SOLD]

Auriou Ironing Rasps – 15mm wide - Unhandled [Clearance, SOLD]

Old stock – unhandled – as new. Hand stitched by the masters of rasp and riffler making in St. Juery, France. These are flat bottomed short ironing rasps. The stitched part is 70mm long and 15mm wide. Stitched on the underside only with a cranked tang for knuckle clearance. Stitch is 8 which is medium cut. These are “old stock” and date from about 2007. Stitched...

£32.00 inc VAT

Saburrtooth 6mm Taper - 1/2' x 1''

15% discount from price shown.

£19.80 inc VAT

view options

Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]

Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]

Unused as new (Sept 2023). Pre-owned but unused. Save a few pennies!

£42.00 inc VAT

Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]

Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]

These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...

£15.00 inc VAT

Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]

Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]

This set of plates is from David Charlesworth workshop in North Devon at Hartland, Devon, England (see the new film featuring Gillian Anderson & Jason Isaacs called THE SALT PATH for an idea of where David lived if you have never been to Hartland). So, David will have used these (probably for testing and review for an article). The plates have not been heavily used in our opinion but are pre-owned...

£385.00 inc VAT

Flexcut Special Edition Forged 4 Knife Set [Clearance, SOLD]

Flexcut Special Edition Forged 4 Knife Set [Clearance, SOLD]

4 different bladed knives for carving / whittling. A few years back (around 2016), Flexcut USA created some Special Edition Forged Knives with drop forged precision machines blades married to bocote wood (a dark wood, similar in appearance to walnut) and leather handles for comfort and grip. Pre-sharpened by hand. The 4 knives are each just over 6” (150mm) in length overall. The blades...

£112.00 inc VAT

Henry Taylor Woodcarving Punch - Snowflake

Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.

£9.60 inc VAT

Auriou Ironing Rasps – 20mm wide - Unhandled [Clearance]

Auriou Ironing Rasps – 20mm wide - Unhandled [Clearance]

Old stock – unhandled – as new. Hand stitched by Auriou Toolworks, the masters of rasp and riffler making in St. Juery, France. These are flat bottomed short ironing rasps. The stitched part is 80mm long and 20mm wide. Stitched on the underside only with a cranked tang for knuckle clearance. Stitch is 6 which is coarse/medium cut. These are “old stock” and date...

£32.00 inc VAT

This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]

This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]

This beauty dates from the 2nd World War and was of government issue. The arrow stamped in the blade is the giveaway sign for this. It is 14 1/2" long overall (about 365mm) and 2 1/2" wide (58mm) It has the original very attractive handle which is in great condition. There are many years of use left in this super chisel which tapers along its length from 1/4" to 1/8"...

£65.00 inc VAT

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]

Pre-owned in excellent condition with a branded plane sack. This description is from our main Lie-Nielsen section where this plane (without plane sack is normally available for £376 - but we are currently out of stock!) ''A versatile, general purpose shoulder plane with nice heft and the best size to start with. This all-metal shoulder plane is based on the Record 073, which in...

£295.00 inc VAT

Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]

Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]

Pre-owned – a commission sale 4, 5, 6, 7 ,8 & 10mm blades come with this plane which has been lightly used. Original packaging (the box is a bit tatty) and Instruction booklet. The condition of the plane and blades is Good ++ (G++) which indicates it is not new, but has been well cared for and has no defects over and above superficial cosmetic blemishes. “Closest in size...

£230.00 inc VAT

Lie-Nielsen SD-4 - Chipbreaker Screwdriver [Preowned, SOLD]

Chipbreaker screwdriver. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles) Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blades, numbered brass ferrule. The...

£42.00 inc VAT

Lie-Nielsen - Pair of 1/4'' Skew Chisels [Preowned, Unused, SOLD]

Lie-Nielsen - Pair of 1/4'' Skew Chisels [Preowned, Unused, SOLD]

A pair of 1/4'' skew chisels from Lie Nielsen Toolworks. Pre-owned. but unused. No box.

£250.00 inc VAT

Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]

Lie-Nielsen - Pair of 3/8'' Skew Chisels [Preowned, Unused, SOLD]

A pair of 3/8'' skew chisels from Lie Nielsen Toolworks. Pre-owned. but unused. No box.

£250.00 inc VAT

David Barron - Attractive Brass Headed Hammer [Preowned, SOLD]

David Barron - Attractive Brass Headed Hammer [Preowned, SOLD]

205mm overall with oblong square faced head 60mm x 15mm x 15mm This has been used but is in G++ condition. The handle is gorgeous and made from rippled ash. It has BARRON stamped very clearly on the bulbous end.

£36.00 inc VAT

Woodpeckers - Rule Stop 2 [Preowned, As New, SOLD]

Woodpeckers - Rule Stop 2 [Preowned, As New, SOLD]

Pre-owned but unused, so as new. Simply take any ruler (or look at our Woodpeckers Friday Finds or Woodpeckers Section) and add this well engineered stop to help you repeat your accurate marking out. Selling in our Woodpecker Section for £52

£38.00 inc VAT

Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]

Pre-owned in excellent, unused condition This description is from our site where this plane (without plane sack is available for £245) ''This is the smallest of the Lie-Nielsen ''Preston style'' shoulder planes, 5/8'' wide, 5 3/4'' long. The blade is 0.140'' thick, and the tool weighs 1.35 lbs. With an adjustable mouth like its larger siblings,...

£195.00 inc VAT

Tite Mark Long Marking Gauge [Preowned, SOLD]

Tite Mark Long Marking Gauge [Preowned, SOLD]

Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...

£100.00 inc VAT

Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]

Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]

An unused set of 5 chisels in the branded Lie-Nielsen leather roll. 3/16'', 1/4'', 5/16'', 3/8'' & 1/2'' Pre-owned but not used.

£595.00 inc VAT

Replacement Blade for Veritas Scraper Shave

This high-carbon steel replacement blade is 0.040'' thick and hardened to Rc48-52, with a 45° cutting edge that can be readily burnished to create a long-lasting hook. Made in Canada.

£13.75 inc VAT

1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]

1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]

Very crisp set of 26 letters plus ampersand (&) plus numbers 0-9 These are unused and are in their original cases.

£36.00 inc VAT

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

Made by Wm. Marples, Sheffield This has a 9'' beech handle with a tapered auger that is stamped 1 1/4'' Wm Marples., Sheffield. It will clean up to G++ with little effort. No rust at all, the handle just needs a light clean with some wax and wire wool.

£24.00 inc VAT

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

This 3 volume set of Knight's American Mechanical Dictionaries and the single volume of Knight's New Mechanical Dictionary (Supplement) was reprinted jointly by The Mid-West Tool Collectors Association and The Early American Industries Association October 1979. It is written elsewhere that "This work has been selected by scholars as being culturally important, and is part of the knowledge...

£250.00 (VAT exempt)

Plough Plane Project [Preowned, SOLD]

So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...

£75.00 inc VAT

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Pre-owned but hardly used. This set of 7 includes the following sizes: 1/8'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'' & 5/8'' (note the correction to earlier description that listed 2 x 3/8" - our apologies for that but it was Fraser's fault as usual) The 5/16'' appears to have been sharpened once but the others are unused. The...

£665.00 inc VAT

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Here is a rare treat. The left hand version has been discontinued and the right handed plane in bronze has not been seen for a few years yet. The Lie-Nielsen No 140 Skew Block Plane is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A...

£1,200.00 inc VAT

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Pre-owned but hardly used at all. This Lie-Nielsen small chisel plane comes with a branded LN sack to keep it protected. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You...

£175.00 inc VAT

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Pre-owned but unused. This is what we say about it on our main site where this exact tool is available for £233 inc VAT "The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own. Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking...

£155.00 inc VAT

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Pre-owned but never used. The description in our Lie-Nielsen plane section says this... "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs. It is called a...

£295.00 inc VAT

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Pre-owned T-300 metric square made in the USA. Unused, as new. Edge markings to 320mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...

£84.00 inc VAT