Flexcut Tri-Jack Pro JKN95
The Flexcut Tri-Jack Pro has three blades that lock in place - a roughing knife, a detail knife and a mini-cutting knife.
The roughing knife is great for modeling surfaces and creating texture, while the detail and cutting knives let you easily make the finest cuts.
The Pistol Grip design minimises hand fatigue and is made of aerospace-grade aluminium with a quarter-cut cherry inlay.
Crown Tools Revolution Spindle Gouge
Spindle Gouges to use with the Crown Tools Revolution Hollowing System are available in two sizes:
3/8'' (10mm) and 1/2'' (13mm)
Tormek HTK-00 Storage Tray
The Tormek HTK-00 Storage Tray stores all the jigs included with their Hand Tool Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
SVM-45 Knife Jig
SVM-140...
Tormek Knife Profile Jig
The Tormek Knife Profile Jig SVP-80 sharpens all makes and shapes of moulding knifes with 24, 30 or 36 mm distance between the hole-centres.
Since you sharpen the flat back surface of the knife, you can use the jig regardless of the profile. Max width 100 mm. Also for profiled paint removal blades.
Tormek TNT-00 Storage Tray
The Tormek TNT-00 Storage Tray stores all the jigs included with their Woodturner's Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
TNT-300 Woodturner's...
Lie-Nielsen - Pair of 1/2'' Skew Chisels [Preowned, Unused, SOLD]
A pair of 1/2'' skew chisels from Lie Nielsen Toolworks.
Pre-owned but unused.
No box.
Woodpeckers 300mm Rule with end stop [Preowned, Unused, SOLD]
Woodpeckers 300mm Rule with end stop.
Unused, as new.
Reads left to right to 300mm on one bevelled edge.
0-150mm from the centre on the other edge.
Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]
This boxed set of 6 tools includes a 9mm 60 degree V tool, a series-11 (veining) 6mm gouge, a series-10 14mm gouge, a series-7 11mm gouge, a series-5 17mm gouge, and a series-3 25mm gouge.
These are Flexcut's large sculpture tools, which are 250mm overall length.
In their original box, totally unused so "as new", although technically pre-owed as we bought them as part of a clearance lot. Available...
1 3/4'' Blade for Clifton No.3 Bench Plane
1 3/4'' blade to fit the Clifton No.3 smoothing plane.
The Clifton bench plane blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C. 3.6mm thick.
1 3/4'' (45mm) wide.
Made in Sheffield, UK
Auriou Ironing Rasps – 15mm wide - Unhandled [Clearance, SOLD]
Old stock – unhandled – as new.
Hand stitched by the masters of rasp and riffler making in St. Juery, France.
These are flat bottomed short ironing rasps. The stitched part is 70mm long and 15mm wide.
Stitched on the underside only with a cranked tang for knuckle clearance.
Stitch is 8 which is medium cut.
These are “old stock” and date from about 2007.
Stitched...
Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]
A lightweight maple handled 3" throat coping saw with 8 possible lockable settings for your blade or you can unlock the thumbwheels so the blade, blade clamps and sleeves rotate freely while cutting.
This saw also has the adaptors to house pin-less saw blades.
3 blades included.
Here is what Blue Spruce Toolworks say about the saw...
"Coping saws have always had a dilemma. Curved...
Brusso Jig TJ-804
Compatible with Brusso JB-804 and JB-804S
Cedar Of Lebanon
Cedar Of Lebanon Bowl Blanks.
Nice fragrance when turning, lightweight with subtle grain patterns.
Gyokucho Dozuki Cross & Rip Bundle - TPE
The Dozuki 240mm Crosscut #371 and Rip Cut #372 saws with the TPE (rubber) handle.
Replacement Blade for Clifton Low Angle Block Plane
1 5/8'' blade to fit the Clifton low angle block plane.
The Clifton blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C.
Made in Sheffield, UK
Replacement Blade for Veritas Cabinetmakers Trimming Plane
Replacement lapped O1 steel blade for the Veritas Cabinetmaker's Trimming Plane. Hardened to Rc58-60.
Made in Canada.
Robert Sorby Chattertool - 215
Chattertool patterns add a neat, random decoration on end grain like box lids. These are created by using the Robert Sorby chattertool which comes with two different double-ended chattering tips and a handy scraper cutter. One chattertool tip (RS220) has a straight and a pointed end, the second (RS221) has a convex and a concave half-round end.
Chatter patterns are created by causing the spring...
Robert Sorby Texturing Tool
This Robert Sorby Texturing Tool is a remarkable adaptation of an engineer's knurling tool. It consists of a handle, blade and a double bevelled texturing cutter with integral bearing.
It can be used to create unique effects that alter the tactile and visual qualities of your bowls, hollow forms, goblets or boxes perfect for adding that individual mark to your work. Orange peel, striated and...
Rotur Deluxe Colleted Pen Mandrel
The new Colleted Pen Mandrel has been designed and made in the UK for pen turning professionals. Very similar to the Original Pen Mandrel, its unique quarter-turn action clamps the shaft in place accurately and its completely dust-free collet remains hidden.
Rotur Original Pen Turning Kit
The Rotur Original Pen Turning Kit is a comprehensive and portable set ideal for both beginners and seasoned pen turners. It includes everything you need to start turning pens, all packed neatly in a sturdy carrying case. The key components of the kit are:
Universal Original Pen Mandrel: Accommodates one or two pen parts simultaneously, suitable for a wide range of pen kits.
7mm Trimming Tool:...
Saburrtooth 1/4'' Cylinder - 1'' x 1'' - (Smooth End)
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4'' Cylinder - 1/2'' x 3/4'' - (Smooth End)
Head Diameter: 1/2"
Head Length: 3/4"
Saburrtooth 1/8'' Pear - 1/4'' x 1/4''
Saburrtooth 1/8" Pear available in Whispers Extra Fine (white), Fine (yellow) and Coarse (green).
Great for concave shapes, detailing and those tricky curves in your projects!
Head Diameter: ¼"
Head Length: ¼"
Spare Blade for Lie-Nielsen 95 Edge Plane
Replacement blade for the Lie-Nielsen No. 95 Edge Planes. Comes with a 25° flat ground bevel.
1.105" wide x .125" thick
A2 cryogenically treated Tool Steel
This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]
This beauty dates from the 2nd World War and was of government issue.
The arrow stamped in the blade is the giveaway sign for this.
It is 14 1/2" long overall (about 365mm) and 2 1/2" wide (58mm)
It has the original very attractive handle which is in great condition.
There are many years of use left in this super chisel which tapers along its length from 1/4" to 1/8"...
Tite-Mark Standard [Preowned, SOLD]
Pre-owned in little used condition.
The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks.
The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head.
The Tite-Mark...
Toothed Blade for Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane
Image shows non-toothed blade
Toothed Replacement blade for the Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane.
Toothed blades have small chisel-like teeth. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will...
Unlocking the Secrets of Traditional Design:
Moldings
Moldings
Well proportioned moldings add visual interest, symmetry and structure to architecture, interiors and furniture. George Walker shows how he creates moldings for period or modern furniture using basic tools and techniques to create harmonious designs.
50 Minutes. Lie-Nielsen Toolworks Productions, 2009.
Veritas Small Plough Plane Conversion Kit - Left Hand
For the Veritas Left Handed Plough Plane
Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]
Used as a demo model a few times. Used but in very good condition with little blade wear.
This Veritas Power tapered tenon cutter makes cutting 60-degree shouldered tenons for rustic furniture quick, easy and accurate.
For use in an electric drill (not a drill press).
This is the 5/8” size and you should use the drill at between 500-700 rpm.
Veritas code 05J4602
Instruction leaflet...
Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]
The Woodpeckers Box Clamp is designed for clamping cases, drawers, cabinets and most other boxes made from material 1/4" - 1" thick. Its main advantage is its ability to apply simultaneous in and downward pressure against 2 perpendicular pieces.
The box clamp can be assembled in "fixture mode" or "hand clamp mode"- either way it works the same with the difference being from which side of the clamp...
4 Ray Iles Mortise Chisels [Preowned]
Very little used these are very well made mortise chisels by legendary English tool maker Ray Iles.
These do not find their way on the market very often as they are not any easy tool to make and Ray tends to send his production to Tools for Working Wood in the USA.
So, these tools have been sparingly used. The beech handles are slightly rounded at the butt (by special request) to make them more...
Glenn Lucas Round Nose Negative Rake Scraper
The Glenn Lucas Round Nose Negative Rake Scraper 1 3/8'' x 3/8'' with a 16'' handle
Great for refining the curves on bowls and platters, very similar to the GL1 but shaped with a round nose.
Lie-Nielsen - Low Angle Rebating Block Plane (Knickered) [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
Original Lie-Nielsen box dates the production to March 2018.
This is what we say on our site about this plane which retails new for £218.....
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R).
''This 12° angle rebate block plane is based on an old...
Robert Sorby Patriot Chuck
No insert or exert included.
Please select your insert from the list below, or visit here
Robert Sorby RSJDG Deep Grip Jaws
Robert Sorby Deep Grip Jaws have deep sides of these jaws make them ideal for large logs or awkward pieces of wood. They come with both internal and external dovetails to hold cumbersome pieces securely.
The photo shows the RSJDG Jaws fitted to a Patriot Chuck (not included).
Selection of 5 Greetings Cards - Set 2
This set of 5 greetings cards includes the following:
Turning Urban
Five Crows
Above the Smokehouse
Earth, Sea & Sky
Shalder's Flight
All images from Fiona Kingdon's fabulous creations.
Blank inside for your own greeting.
All 5 are DL (21cm 19cm) and are printed on 300gsm card
Flexcut Pro Series 2'' Roughing Knife FP03
The 2'' Flexcut Pro Roughing Knife features a robust full flat grind sheepsfoot blade in precision heat treated 1095 steel, polished to a brilliant mirror finish.
This knife excels at handling heavy preliminary stock removal work. The longer blade length, slim profile, and detail tip provides plenty of blade to cover a wide variety of heavy cuts in various stock sizes while maintaining full...
Flexcut Roughing Power Gouge Set RG404
These Roughing Power Gouges are for removing larger amounts of waste wood. Can be used by hand with our RG102 Handle Adaptor.
Power Gouges included: RG400 #3 x 5/8', RG401 #5 x 9/16', RG402 #8 x 3/8', RG403 70 deg. x 3/8'.
Orbicut Grinding Card
A double sided diamond credit card style stone, designed to be used with the Orbicut blades / cutters.
Proxxon Cordless Long Neck Angle Grinder (Body Only)
Body only. No battery included.
David Barron Dovetail Kit Bundle
The ever popular Gyokucho Razorsaw Dozuki 240mm Rip saw bundled together with the David Barron 1:6 and 1:8 dovetail guides plus the 90 degree guide.
This kit also includes the Knew Concepts 5'' fret saw with lever tension and swivel blade clamps. Knew Concepts saw comes complete with a dozen Pegas #7 tooth blades (15tpi) as recommended by David.
Gifkins F15 Finger Jig Template Upgrade Kit
F15 templates are suitable for stock from 13 mm to 22 mm thick and use a 1/4" shank cutter
F15 Finger Joint Template and Cutters Kit - Includes F15 Template with Straight Cutter, 5 Adjusting Sleeves, Red Spacer, 2 backing boards and Instructions.
You can purchase cutters individually.
Specifications
Cutter: TGF15
Finger size: 15 mm
Finger Spacing: 30 mm
Max Thickness: 22 mm
Max Width:...
Gyokucho Blade for Small Gardening Saw (6611)
Replacement for the Gyokucho #6611 saw
Robert Sorby Long Nose Jaws
Robert Sorby Long Nose Jaws have a reach of 4" allowing bowls to be remounted internally. The shape of the jaws allows easy access to the back of the project. Dovetailed internally and externally for extra versatility.
The photo shows the Long Nose Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Midi Round Tip
The Robert Sorby Midi Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting. A true work horse designed for the midi multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below)
Sharpening: Use a diamond file or honing stone flat across the face. To gain best results and increase the longevity of the cutter this simple...
Ulmia Alu-Line Sliding Bevel
A new range of layout tools from Ulmia. Ulmia are probably best known for their workbenches and wooden hand planes, but as soon as we picked these up we knew we needed to add them to our ever increasing inventory! This new series is called Alu-Line, and combines aluminium and walnut to give these squares and bevels a feel of quality which is hard to find at this price point.
Precision milled...