Sort By
Per Page
View
Grid
List
![Record 405 Multi-Plane [Preowned, SOLD]](/images/products/small/3817_9612.jpg "Record 405 Multi-Plane [Preowned, SOLD]")
![Record 405 Multi-Plane [Preowned, SOLD]](/images/products/small/3817_9607.jpg "Record 405 Multi-Plane [Preowned, SOLD]")
Record 405 Multi-Plane [Preowned, SOLD]
A little used Record 405 in its original box, complete with a full set of cutters and instruction booklet.
Here is a great place to look and learn about this plane.
Note this plane comes with 23 standard cutters. The plane has a stained beech handle.
.png "Last Ones!")
Auriou Standard Stonecarving Deer's Foot Chisels
The Auriou Standard Stonecarving Deer's Foot Chisels are robust, high-quality tools designed for detailed work on soft stone and marble. Featuring two teeth that resemble a deer's foot, these chisels are perfect for precise carving tasks. Available in sizes ranging from 6mm to 20mm, they provide versatility for various sculpting needs.
Sizes Available: 6mm, 15mm, 20mm
Purpose: Ideal...
Chippendale Chairs with Jeff Miller
This Chippendale-style Chair has a classic yet simple elegance that fits in well with a wide range of other styles. It's a project you'll want to show off, and building one will greatly increase your capabilities as a woodworker. Carefully worked out methods make this chair an accessible — but still challenging – hand tool project.
Jeff Miller is a furniture designer, craftsman, teacher, and...
Flexcut #11X Thumbnail Interchangeable Gouges
The Flexcut #11X Thumbnail Gouges are interchangeable blades with a steep curved cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
3/16" (5mm) SK725
5/16" (8mm) SK925
3/8" (10mm)...
Flexcut Knife Sheath with Clip KN02
This moulded leather sheath from Flexcut will fit any standard knife profile (does not fit mini-knives, KN33 Hooked Push Knife, or scorps).
A blade stop is fixed at the bottom of the sheath to keep the point from cutting through. The metal belt clip attaches easily to any belt style.
Flexcut Stub Sloyd Knife KN53
The Flexcut Stub Sloyd Knife has a shorter blade than their original Sloyd Knife. With a blade length of 2 1/2'', you’ll have more control for your smaller sized projects. As with their original Sloyd, this carving knife is a during wellmade tool, great for spoon carving, whittling, marking and general woodworking.
Its versatility allows a wide range of projects from detail work to...
Floral Relief Carving with Mary May - 2 Disc
Learn to carve two deep relief carving projects: a lily and a rose. Each present interesting challenges such as overlapping petals and leaves. Mary also explains the different types of relief carving, shows you the tools to use, and how to attach the carvings to a temporary backer board to safely hold your piece as you work on it.
Mary May is a professional woodcarver in Charleston, SC, who specializes...
Fundamentals of Inlay:
Paterae, Part I
Paterae, Part I
by Steve Latta
Paterae has a rich and diverse tradition in the Federal Style of American furniture design. These oval-shaped ornaments were often used to give decorative flair to the upper portion, or pilaster, of Federal table legs. In this fourth DVD with inlay master, Steve Latta, we explore the tools, materials, and techniques to create eight specific Paterae designs.
141 minutes, DVD....
Gransfors Bruk Small Straight Adze 56mm
The Gränsfors Small Straight Adze is an old Scandinavian axe design with a transverse edge. It is perhaps best described as ‘a chisel you can chop with’. The adze has a wide range of applications. It can be used to square off logs and planks to create a smooth surface, to shape beams and purlins, and to form ribs for boats. The Small Straight Adze is usually kept for when the user...
Hamlet Thread Chasers 18 tpi HSS (pair of)
Thread chasers by Hamlet Craft Tools in Sheffield, England.
These are tools used for chasing (this basically means cutting) a thread on your workpiece on your lathe and are made in matched pairs. One of the pair (the male or external thread) has its cutting 'teeth' at the end of the blade and is used for threading the outside of the workpiece, whilst the "female" has cutting teeth set at right...
Henry Taylor Chris Stott Hollowing Tool
This Henry Taylor Hollowing Tool has been designed personally by Chris Stott. These tools are ideal for turning small hollow forms up to 4'' in depth or diameter. The bent scraper works perfectly on curved areas, including tight areas around the neck of the opening.
This hollowing tool is 3/8'' in size.
Handle length is 10''
![Karl Holtey 982 Smoothing Plane [Preowned, SOLD]](/images/products/small/3979_10257.jpg "Karl Holtey 982 Smoothing Plane [Preowned, SOLD]")
![Karl Holtey 982 Smoothing Plane [Preowned, SOLD]](/images/products/small/3979_10256.jpg "Karl Holtey 982 Smoothing Plane [Preowned, SOLD]")
Karl Holtey 982 Smoothing Plane [Preowned, SOLD]
The best description of this plane is from Karl Holtey's website. Karl has long been recognised as a planemaker who has always sought perfection in his work. He is regarded by many as one of the best, if not the best modern day planemaker.
The 982 was made in the early years of the last decade. This example has seen very little use and has minor superficial scratch marks on the sole consistent...
Left Handed Auriou Cranked Neck Curved Ironing Rasps
These are the Left Handed versions, to see the Right Handed please CLICK HERE.
The Left-Handed Auriou Cranked Neck Curved Ironing Rasps are precision tools ideal for working in small, tight areas. The cranked tang provides knuckle clearance, and the curved shape allows easy access to your workpiece. Available in various widths (10mm, 15mm, 20mm, 25mm, and 30mm) and grains, they offer control and...
Robert Sorby Spiralling System
The Robert Sorby Spiralling System is a further development of the texturing tool and is used to create both left and right handed spirals with ease. Creating barley twists, spirals and flutes has always represented a problem for the woodturner, the Spiralling System not only overcomes many of these difficulties, but also allows the turner’s imagination to run wild as he enters a new field of...
Rotur Deluxe Rotating Centre
The Rotur Deluxe Rotating Centre features a unique design where the main body remains stationary while a small point turns, providing precise support for detailed woodturning tasks. With a slim 12mm diameter nose and a 60-degree point, it’s ideal for intricate work as well as general spindle turning. The center is equipped with a triple bearing system, including a thrust race, ensuring smooth...
Rotur Drills for Pen Turning
Rotur tin coated twist drill bits for pen turning.
Two sets available:
6.8mm, 6.9mm, and 7mm
9.8mm, 9.9mm, and 10mm
Rotur Pen Mandrel Spares
The Rotur Pen Mandrel Spares collection provides essential components to keep your pen turning setup in peak condition, ensuring precision and reliability.
Key Components:
Shaft & Nuts Set:
Material: High-quality precision-ground steel.
Features: 6.17mm diameter shaft with a 1/4" BSF thread for stability and accuracy. Compatible with Original and Deluxe mandrels.
4...
Rotur Pen Mandrel Support
The Rotur Pen Mandrel Support protects the centre point and mandrel shaft.
Available in 1MT & 2MT versions.
Saburrtooth 1/4'' Cross Cutter - 3/4''
Shape: Cross Cut Eyecutter
Diameter: 3/4''
Head Length: 3/4
Saburrtooth 1/4'' Cross Cutter 1/4''
Shape: Cross Cut Eyecutter
Diameter: 1/4''
Head Length: 1/4"
Saburrtooth 1/4'' Taper - 1/2'' x 1''
Available in X fine, fine, coarse and X coarse.
Head Diameter: 1/2"
Head Length: 1"
Saburrtooth 1/8'' Concave - 1/4'' x 0.40'' (Smooth End)
Head Diameter: 1/4"
Head Length: 0.40"
Saburrtooth 1/8'' Cylinder - 1/8'' x 7/8'' - (Smooth End)
Saburrtooth 1/8" Cylinder smooth end available in fine and coarse.
Head Diameter: 1/8"
Head Length: 7/8"
Saburrtooth 1/8'' Dove Tail Smooth End - 3/8'' x 1/2''
Head Diameter: 3/8"
Head Length: 1/2"
If grits are not displayed they are no longer available.
Saburrtooth 1/8'' Long Cylinder - 1/8'' x 1 1/4''
Saburrtooth 1/8" Long Cylinder available in fine and coarse.
Head Diameter: 1/8"
Head Length: 1¼"
Selection of 5 Greetings Cards - Set 1
This set of 5 greetings cards includes the following:
Breeze
Fisherman & Geese
Kingfisher
Bucket & Spade
Any Port in a Storm
All images from Fiona Kingdon's fabulous creations.
Blank inside for your own greeting.
All 5 are DL (21cm 10cm) and are printed on 300gsm card
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Replacement PM-V11 blade for the Veritas bullnose shoulder plane are lapped, 1/8" (0.125") thick.
Tormek Scissors Jig - New
Why SC-60 Scissors Jig?
Simple 60° angle quick setting to get precise angles instantly.
Enhanced compatibility with the WM-200 AngleMaster to easily set any angle you might want.
Designed for ultra-low friction and minimised vibration.
Customized clamping for more secured sharpening.
Compatible with the Tormek T-2 Pro Kitchen Knife Sharpener, Tormek T-4, Tormek T-8 and older models.
Simple...
Two for You - Rasp Pair
A pair of the best Auriou rasps for wood to have in your workshop.
Cabinet Rasp 10'' Grain 9
Modeller Rasp 7'' Grain 13
Flexcut 11 Pocket Tool Roll VROLL
The Flexcut 11 Pocket Tool Roll conveniently organises and protects your carving tools.
This tool roll will accept up to 10 SK unhandled gouges and 1 interchangeable handle.
Flexcut Detailing Power Gouge Set RG310
These Flexcut Detailing Power Gouges are tools for smaller carving and detail.
Can be used by hand with the RG102 Handle Adaptor.
Power Gouges included:
RG305 #3 x 3/8''
RG306 #5 x 5/16''
RG309 #11 x 1/8''
RG307 70 deg. x 1/4''
German Spindle Gouge 1/2''
Spindle gouges are used for detailed shaping between centres on parallel grain, particularly for concave curves. They can be used to create beads, coves and other profiles on vases, goblets, candle sticks and more shaped work.
Handle length is 10''
Manpa 3'' Multi Cutter - Master (M14)
The Master is the ultimate power tool for all projects including wood and ice carving, bonsai and the final sanding to give you the perfect finish to your project.
Spindle size is M14 - please check spindle size of your angle grinder before ordering.
Compatible Blades: 3'' and 4'' blades are supported
Includes :
x1 - 3'' Circular cutter 8mm
x1 - 4''...
Robert Sorby Patriot Chuck
No insert or exert included.
Please select your insert from the list below, or visit here
Set of 7 Single Grit Toishi + Nagura Stone
This set includes 7 single grit stones and the Nagura correcting stone.
These stones are 3 inches (75mm) wide which is particularly useful when honing wide plane blades, knives or cut throat razors.
These stones cut quickly but are dense and hard enough not that most of the them do not require soaking prior to use (the exceptions are the 220 & 600 grits). A sprinkle of water is all you need...
Temple Tool Co. Japanese Trowel Chisel
Kote Nomi (trowel chisels) are specialised Japanese hand-forged, bent-neck chisels designed for precision paring in tight spaces, such as cleaning up the bottom of grooves, dadoes, sliding dovetails, and mortises. They feature a laminated steel blade with a steep bevel and a ''gooseneck'' shape to keep hands clear of the work.
Blade width 13/16'' (21mm)
Overall Length...
Veritas 150mm Aluminium Bench Rule
Shaped much like a classic school ruler, this relatively narrow rule is lightweight and easy to handle, making it an ideal choice for precise drawing and design tasks.
The fine laser-etched markings stand out clearly against the matte black anodized finish, with one edge that reads right to left and the other left to right. All scales are graduated in millimetre increments.
Cut from a solid aluminum...
Flexcut Roughing Power Gouge Set RG404
These Roughing Power Gouges are for removing larger amounts of waste wood. Can be used by hand with our RG102 Handle Adaptor.
Power Gouges included:
RG400 #3 x 5/8',
RG401 #5 x 9/16',
RG402 #8 x 3/8',
RG403 70 deg. x 3/8'.
Robert Sorby Midi Round Cutter
The Robert Sorby Midi Round Cutter is the perfect circular cutter for all general purpose turning. An incredible all rounder this cutter provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening. The perfect accompaniment for the Midi Hollowmaster – the tool it was designed for – and for delivering those scraping finishing cuts on smaller...
Robert Sorby Zero Jaws
These innovative jaws allow the turning of extremely fine, detailed pieces like lace bobbins as they close right down. The unique dome shape enables the turner to work close to his project. At the same time the dome can be used for internal gripping of larger projects without the fear of marking.
The photo shows the Zero Jaws fitted to a Patriot Chuck (not included).
Manpa Round Carving Bits - 1/8'' Shank
The Manpa Mini Carving Bits - Round (1/8'' Shank) are designed for smooth carving on wood with a 5mm cutter which is replaceable.
They are great for detail work and sculpting and have been created specifically for textures.
Also included is a T6 Torx Wrench.
![Philip Marcou - Smoothing Plane [Preowned, SOLD]](/images/products/small/4079_10731.jpg "Philip Marcou - Smoothing Plane [Preowned, SOLD]")
![Philip Marcou - Smoothing Plane [Preowned, SOLD]](/images/products/small/4079_10728.jpg "Philip Marcou - Smoothing Plane [Preowned, SOLD]")
Philip Marcou - Smoothing Plane [Preowned, SOLD]
Offers are invited in the region of £2500 for this fabulous plane. Email sales@classichandtools.com or call 01473 784983 to discuss
Veritas 38'' (965mm) Aluminium Straightedge
Shop accuracy begins with a benchmark straightedge as a surface reference. The Veritas anodized aluminum straightedges will not rust, and they are wide enough to stand on edge unsupported, so you have both hands free to make precise adjustments to your tools.
Extremely useful for setting up machines such as planers and jointers, they are 1 3/4'' (44mm) high and 7/16'' (11.1mm) thick,...
17th Century Wainscot Chair with Peter Follansbee
The Wainscot Chair is one of the hallmarks of 17th century joinery. In this DVD, Peter demonstrates how to prepare material from a section of oak, shape the chair pieces using bench tools and a pole lathe, and join them together with drawbored mortise and tenon joints. He also offers two traditional approaches for making the angled joints of this chair.
Peter Follansbee specializes in 17th century...
Auriou Stone Rifflers - Rat Tail and Oval
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue.
They are made the same way as Auriou's rifflers for wood. the difference is in the "cut" or "stitch" or "grain"
Auriou stone rifflers have a coarser cut than same length riffler for wood..
Flexcut Universal Adaptor SK109
The Flexcut Universal Adaptor SK109 allows you to use Flexcut SK tools with many reciprocating power tools, including the Proxxon Detail Carver and Automach.
This adaptor enhances the versatility of your power carving tools, making it a valuable addition for any woodworker.
Kutzall 2'' Polyplug Insert
Enhance the performance of your Kutzall Contour Wheels with these PolyPlug (3/8'' bore) Accessories! They are designed to fit inside the wheels to help optimize performance and extend their life.
Reduces vibration for a smoother, quieter, and more comfortable operation.
Increases mounting accuracy resulting in a more 'true' operation - also allows the wheel to wear evenly for...
Lie-Nielsen Honing Guide 18° Skewed Jaw Pair, Left Hand
The Lie-Nielsen 18° Skewed Jaw Pairs fit the Lie-Nielsen No. 140 Skew Block Plane (left or right hand).
The blade for the left hand No. 140 fits the left skewed jaws.